psmattas/device_motorola_sanders
Archived
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Initial Commit4

Browse Source
This commit is contained in:
MandySingh3
2017-04-03 03:20:44 +05:30
parent bc8e833c07
commit 7beda1dfbc
214 changed files with 50630 additions and 45 deletions
Download Patch File Download Diff File Expand all files Collapse all files

135
configs/camera/msm8953_mot_camera.xml Normal file
View File

@@ -0,0 +1,135 @@
<!--
Copyright (c) 2015 Qualcomm Technologies, Inc.
All Rights Reserved.
Confidential and Proprietary - Qualcomm Technologies, Inc.
-->
<!--
CameraModuleConfig :
This node must be added for each module prosent in the device.
It contain all information about the module present.
The number of nodes of CameraModuleConfig indicate number of modules
to be probed on the device.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
*CameraId :
Camera Id is the Slot number in which the mode is plugged.
Valid values are 0, 1, 2 and 3.
*SensorName :
Name of the sensor present on the module.
The sensor library name should be of the form libmmcamera_<SensorName>.so
ActuatorName :
Name of the actuator on this module.
The actuator library name should be of the form libactuator_<ActuatorName>.so.
If there is no actuator remove the <ActuatorName> node.
EepromName :
Name of the eeprom on this module.
Eeprom lib name should be of the form libmmcamera_<EepromName>_eeprom.so
If there is no eeprom remove the <EepromName> node.
FlashName :
Name of the flash on this module.
The flash library name should be of the form libflash_<FlashName>.so.
If there is no flash remove the <FlashName> node.
ChromatixName :
Name of the tuning xml file.
Tuning file contains the list of chromatix library names.
If there is no tuning xml file remove the <ChromatixName> node.
Position :
Position of the sensor module. Valid values are 0, 1 and 2.
For CAMERA_POSITION_BACK use 0.
For CAMERA_POSITION_FRONT use 1.
For CAMERA_POSITON_BACK_AUX use 2.
MountAngle :
Angle at which the sensor is mounted. Valid values are 0, 90, 180, 270 and 360.
To use default mountangle mentioned in kernel use 360.
CsiInfo : This node contains information about the receiver configuration.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
*CSIDCore :
CSID core to receive the data. Valid values are 0, 1, 2 and 3.
*LaneMask :
Mask to mention which lane is enabled.
LaneMask[0] for DL0.
LaneMask[1] for CLK.
LaneMask[2] for DL1.
LaneMask[3] for DL2.
LaneMask[4] for DL3
*LaneAssign :
Number which describes the lane mapping between sensor and PHY.
LaneAssign[0:3] is sensor lane number connected to data lane 0 of a PHY on the MSM side
LaneAssign[4:7] is sensor lane number connected to data lane 2 of a PHY on the MSM side
LaneAssign[8:11] is sensor lane number connected to data lane 3 of a PHY on the MSM side
LaneAssign[12:15] is sensor lane number connected to data lane 4 of a PHY on the MSM side
NOTE : Lane 1 is reserved for the clock lane. Wiring and setting it to a data lane is prohibited.
ComboMode :
Flag to enable combo mode.
This flag is enabled if multiple sensors are using same CSI-PHY receiver
LensInfo : Information of the lens present in the module.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
*FocalLength :
FocalLength of the lens in micometers.
Distance between the center of curvature to the focal point.
*FNumber :
FNumber of the lens.
*TotalFocusDistance : The total distance in meters the lens could focus.
*HorizontalViewAngle : HorizontalViewAngle in degrees
*VerticalViewAngle : VerticalViewAngle in degrees
*MinFocusDistance : Minimum distance in meters the lens could focus.
*VARIABLES MARKED WITH ASTRICK (*) ARE MANDATORY.
-->
<CameraConfigurationRoot>
<CameraModuleConfig>
<CameraId>1</CameraId>
<SensorName>mot_imx362</SensorName>
<EepromName>imx362</EepromName>
<ActuatorName>mot_ak7371</ActuatorName>
<FlashName>pmic</FlashName>
<ChromatixName>mot_imx362_chromatix</ChromatixName>
<ModesSupported>1</ModesSupported>
<Position>BACK</Position>
<MountAngle>90</MountAngle>
<CSIInfo>
<CSIDCore>0</CSIDCore>
<LaneMask>0x1F</LaneMask>
<LaneAssign>0x4320</LaneAssign>
<ComboMode>0</ComboMode>
</CSIInfo>
<LensInfo>
<FocalLength>4.28</FocalLength>
<FNumber>1.7</FNumber>
<TotalFocusDistance>0.187</TotalFocusDistance>
<HorizontalViewAngle>65.0</HorizontalViewAngle>
<VerticalViewAngle>51.0</VerticalViewAngle>
<MinFocusDistance>0.1</MinFocusDistance>
</LensInfo>
</CameraModuleConfig>
<CameraModuleConfig>
<CameraId>2</CameraId>
<SensorName>mot_ov5695</SensorName>
<EepromName>ov5695</EepromName>
<ChromatixName>mot_ov5695_chromatix</ChromatixName>
<ModesSupported>1</ModesSupported>
<Position>FRONT</Position>
<MountAngle>270</MountAngle>
<CSIInfo>
<CSIDCore>2</CSIDCore>
<LaneMask>0x07</LaneMask>
<LaneAssign>0x4320</LaneAssign>
<ComboMode>0</ComboMode>
</CSIInfo>
<LensInfo>
<FocalLength>2.44</FocalLength>
<FNumber>2.2</FNumber>
<TotalFocusDistance>1.26</TotalFocusDistance>
<HorizontalViewAngle>72.95</HorizontalViewAngle>
<VerticalViewAngle>57.60</VerticalViewAngle>
<MinFocusDistance>0.1</MinFocusDistance>
</LensInfo>
</CameraModuleConfig>
</CameraConfigurationRoot>

124
configs/camera/ov16860_chromatix.xml Normal file
View File

@@ -0,0 +1,124 @@
<!--
Copyright (c) 2015 Qualcomm Technologies, Inc.
All Rights Reserved.
Confidential and Proprietary - Qualcomm Technologies, Inc.
-->
<!--
CommonChromatixInfo:
CommonChromatixInfo is the information about chromatix needed for
various use cases.
Ex:- Preview, Snapshot, ZSL, HFR, HDR, Video, Liveshot for ISP, CPP,
3A and SW PostProc.
Entries in this node are common for all sensor modes.
ResolutionChromatixInfo:
ResolutionChromatixInfo is the information about chromatix needed for
various use cases.
Ex:- Preview, Snapshot, ZSL, HFR, HDR, Video, Liveshot for ISP, CPP,
3A and SW PostProc.
Entries in this node are specific to sensor resolution.
ChromatixName:
Contains the list of chromatix names for all modules.
special_mode_mask:
It is the bit mask for special modes, which is used for
chromatix selection.
Special modes can be any mode that needs a special chromatix.
Ex:- scene mode, DZOOM mode, OIS capture mode, flash mode
This is applicable for CommonChromatixInfo and
ResolutionChromatixInfo.
special_mode_mask="0" means none of the special modes are
selected.
sensor_resolution_index:
It is the sensor resolution index for which chromatix libraries
will be choosen.
It is applicable only in ResolutionChromatixInfo.
ISPCommon :
Common tuning library name for ISP
ISPPreview :
Preview tuning library name for ISP
ISPSnapshot :
Snapshot tuning library name for ISP
CPPCommon :
Common tuning library name for CPP
CPPPreview :
Preview tuning library name for CPP
CPPSnapshot :
Snapshot tuning library name for CPP
CPPLiveshot :
Liveshot tuning library name for CPP
PostProc :
Tuning library name for postproc module
A3Preview :
Preview tuning library for 3A
A3Video :
Video tuning library for 3A
Order of Resolution Pick:
Assume the current sensor mode is "r" and special mode mask is "s".
Chromatix for a module and type is choosen in this order till we find a
valid chroamtix file name or else NULL is returned.
1) From ResolutionChromatixInfo node for which sensor_resolution_index
is "r" and special_mode_mask is "s".
2) From CommonChromatixInfo node for which special_mode_mask is "s".
3) From ResolutionChromatixInfo node for which sensor_resolution_index
is "r" and special_mode_mask is "0".
4) From CommonChromatixInfo node for which special_mode_mask is "0".
5) NULL is returned if we dont find in any of the above cases.
special_mode_mask values:
SENSOR_SPECIAL_MODE_NONE = 0,
SENSOR_SPECIAL_MODE_FLASH = 1,
SENSOR_SPECIAL_MODE_ZOOM_UPSCALE = 2,
SENSOR_SPECIAL_MODE_ZOOM_DOWNSCALE = 4,
SENSOR_SPECIAL_MODE_OIS_CAPTURE = 8,
-->
<ChromatixConfigurationRoot>
<CommonChromatixInfo>
<ChromatixName special_mode_mask="0">
<ISPCommon>ov16860_common</ISPCommon>
<PostProc>ov16860_postproc</PostProc>
<CPPPreview>ov16860_cpp_snapshot</CPPPreview>
<CPPSnapshot>ov16860_cpp_snapshot</CPPSnapshot>
</ChromatixName>
<ChromatixName special_mode_mask="MOT_4K_VIDEO">
<ISPVideo>ov16860_video_4k</ISPVideo>
<CPPVideo>ov16860_cpp_video_4k</CPPVideo>
<CPPLiveshot>ov16860_cpp_liveshot_4k</CPPLiveshot>
<A3Video>ov16860_4k_video_3a</A3Video>
</ChromatixName>
<ChromatixName special_mode_mask="MOT_ALTM_IHDR_VIDEO">
<ISPVideo>ov16860_default_ihdr_video</ISPVideo>
<CPPLiveshot>ov16860_cpp_liveshot_ihdr</CPPLiveshot>
<A3Video>ov16860_ihdr_video_3a</A3Video>
</ChromatixName>
<ChromatixName special_mode_mask="MOT_4K_IHDR_VIDEO">
<ISPVideo>ov16860_ihdr_video_4k</ISPVideo>
<CPPLiveshot>ov16860_cpp_liveshot_4k_ihdr</CPPLiveshot>
<A3Video>ov16860_4k_ihdr_video_3a</A3Video>
</ChromatixName>
</CommonChromatixInfo>
<ResolutionChromatixInfo>
<ChromatixName sensor_resolution_index="0" special_mode_mask="0">
<ISPPreview>ov16860_snapshot</ISPPreview>
<ISPSnapshot>ov16860_snapshot</ISPSnapshot>
<ISPVideo>ov16860_default_video</ISPVideo>
<CPPVideo>ov16860_cpp_video</CPPVideo>
<CPPLiveshot>ov16860_cpp_liveshot</CPPLiveshot>
<A3Preview>ov16860_zsl_preview_3a</A3Preview>
<A3Video>ov16860_zsl_video_3a</A3Video>
</ChromatixName>
<ChromatixName sensor_resolution_index="1" special_mode_mask="0">
<ISPPreview>ov16860_hfr_120</ISPPreview>
<ISPSnapshot>ov16860_hfr_120</ISPSnapshot>
<ISPVideo>ov16860_hfr_120</ISPVideo>
<CPPLiveshot>ov16860_cpp_liveshot</CPPLiveshot>
<CPPVideo>ov16860_cpp_hfr_120</CPPVideo>
<A3Preview>ov16860_hfr_120_3a</A3Preview>
<A3Video>ov16860_hfr_120_3a</A3Video>
</ChromatixName>
</ResolutionChromatixInfo>
</ChromatixConfigurationRoot>

110
configs/camera/ov5693_chromatix.xml Normal file
View File

@@ -0,0 +1,110 @@
<!--
Copyright (c) 2015 Qualcomm Technologies, Inc.
All Rights Reserved.
Confidential and Proprietary - Qualcomm Technologies, Inc.
-->
<!--
CommonChromatixInfo:
CommonChromatixInfo is the information about chromatix needed for
various use cases.
Ex:- Preview, Snapshot, ZSL, HFR, HDR, Video, Liveshot for ISP, CPP,
3A and SW PostProc.
Entries in this node are common for all sensor modes.
ResolutionChromatixInfo:
ResolutionChromatixInfo is the information about chromatix needed for
various use cases.
Ex:- Preview, Snapshot, ZSL, HFR, HDR, Video, Liveshot for ISP, CPP,
3A and SW PostProc.
Entries in this node are specific to sensor resolution.
ChromatixName:
Contains the list of chromatix names for all modules.
special_mode_mask:
It is the bit mask for special modes, which is used for
chromatix selection.
Special modes can be any mode that needs a special chromatix.
Ex:- scene mode, DZOOM mode, OIS capture mode, flash mode
This is applicable for CommonChromatixInfo and
ResolutionChromatixInfo.
special_mode_mask="0" means none of the special modes are
selected.
sensor_resolution_index:
It is the sensor resolution index for which chromatix libraries
will be choosen.
It is applicable only in ResolutionChromatixInfo.
ISPCommon :
Common tuning library name for ISP
ISPPreview :
Preview tuning library name for ISP
ISPSnapshot :
Snapshot tuning library name for ISP
CPPCommon :
Common tuning library name for CPP
CPPPreview :
Preview tuning library name for CPP
CPPSnapshot :
Snapshot tuning library name for CPP
CPPLiveshot :
Liveshot tuning library name for CPP
PostProc :
Tuning library name for postproc module
A3Preview :
Preview tuning library for 3A
A3Video :
Video tuning library for 3A
Order of Resolution Pick:
Assume the current sensor mode is "r" and special mode mask is "s".
Chromatix for a module and type is choosen in this order till we find a
valid chroamtix file name or else NULL is returned.
1) From ResolutionChromatixInfo node for which sensor_resolution_index
is "r" and special_mode_mask is "s".
2) From CommonChromatixInfo node for which special_mode_mask is "s".
3) From ResolutionChromatixInfo node for which sensor_resolution_index
is "r" and special_mode_mask is "0".
4) From CommonChromatixInfo node for which special_mode_mask is "0".
5) NULL is returned if we dont find in any of the above cases.
special_mode_mask values:
SENSOR_SPECIAL_MODE_NONE = 0,
SENSOR_SPECIAL_MODE_FLASH = 1,
SENSOR_SPECIAL_MODE_ZOOM_UPSCALE = 2,
SENSOR_SPECIAL_MODE_ZOOM_DOWNSCALE = 4,
SENSOR_SPECIAL_MODE_OIS_CAPTURE = 8,
-->
<ChromatixConfigurationRoot>
<CommonChromatixInfo>
<ChromatixName special_mode_mask="0">
<ISPCommon>ov5693_common</ISPCommon>
<PostProc>ov5693_postproc</PostProc>
<CPPPreview>ov5693_cpp_snapshot</CPPPreview>
<CPPSnapshot>ov5693_cpp_snapshot</CPPSnapshot>
<CPPLiveshot>ov5693_cpp_liveshot</CPPLiveshot>
</ChromatixName>
</CommonChromatixInfo>
<ResolutionChromatixInfo>
<ChromatixName sensor_resolution_index="0" special_mode_mask="0">
<ISPPreview>ov5693_snapshot</ISPPreview>
<ISPSnapshot>ov5693_snapshot</ISPSnapshot>
<ISPVideo>ov5693_default_video</ISPVideo>
<ISPLiveshot>ov5693_snapshot</ISPLiveshot>
<CPPVideo>ov5693_cpp_video</CPPVideo>
<A3Preview>ov5693_snapshot_3a</A3Preview>
<A3Video>ov5693_default_video_3a</A3Video>
</ChromatixName>
<ChromatixName sensor_resolution_index="1" special_mode_mask="0">
<ISPPreview>ov5693_hfr_120</ISPPreview>
<ISPSnapshot>ov5693_hfr_120</ISPSnapshot>
<ISPVideo>ov5693_hfr_120</ISPVideo>
<ISPLiveshot>ov5693_hfr_120</ISPLiveshot>
<CPPVideo>ov5693_cpp_hfr_120</CPPVideo>
<A3Preview>ov5693_hfr_120_3a</A3Preview>
<A3Video>ov5693_hfr_120_3a</A3Video>
</ChromatixName>
</ResolutionChromatixInfo>
</ChromatixConfigurationRoot>

5
configs/com.motorola.cameraone.xml Normal file
View File

@@ -0,0 +1,5 @@
<?xml version="1.0" encoding="utf-8" ?>
<permissions>
<feature name="com.motorola.cameraone" />
</permissions>

403
configs/libnfc-brcm.conf Normal file
View File

@@ -0,0 +1,403 @@
###################### Start of libnfc-common.conf #######################
###############################################################################
# Application options
APPL_TRACE_LEVEL=0xFF
PROTOCOL_TRACE_LEVEL=0xFFFFFFFF
###############################################################################
# performance measurement
# Change this setting to control how often USERIAL log the performance (throughput)
# data on read/write/poll
# defailt is to log performance dara for every 100 read or write
#REPORT_PERFORMANCE_MEASURE=100
###############################################################################
# File used for NFA storage
NFA_STORAGE="/data/nfc"
###############################################################################
# Snooze Mode Settings
#
# By default snooze mode is enabled. Set SNOOZE_MODE_CFG byte[0] to 0
# to disable.
#
# If SNOOZE_MODE_CFG is not provided, the default settings are used:
# They are as follows:
# 8 Sleep Mode (0=Disabled 1=UART 8=SPI/I2C)
# 0 Idle Threshold Host
# 0 Idle Threshold HC
# 0 NFC Wake active mode (0=ActiveLow 1=ActiveHigh)
# 1 Host Wake active mode (0=ActiveLow 1=ActiveHigh)
#
#SNOOZE_MODE_CFG={08:00:00:00:01}
###############################################################################
# Insert a delay in milliseconds after NFC_WAKE and before write to NFCC
#NFC_WAKE_DELAY=20
###############################################################################
# Various Delay settings (in ms) used in USERIAL
# POWER_ON_DELAY
# Delay after turning on chip, before writing to transport (default 300)
# PRE_POWER_OFF_DELAY
# Delay after deasserting NFC-Wake before turn off chip (default 0)
# POST_POWER_OFF_DELAY
# Delay after turning off chip, before USERIAL_close returns (default 0)
#
#POWER_ON_DELAY=300
#PRE_POWER_OFF_DELAY=0
#POST_POWER_OFF_DELAY=0
###############################################################################
# Maximum time (ms) to wait for RESET NTF after setting REG_PU to high
# The default is 1000.
#NFCC_ENABLE_TIMEOUT=0
###############################################################################
# LPTD mode configuration
# byte[0] is the length of the remaining bytes in this value
# if set to 0, LPTD params will NOT be sent to NFCC (i.e. disabled).
# byte[1] is the param id it should be set to B9.
# byte[2] is the length of the LPTD parameters
# byte[3] indicates if LPTD is enabled
# if set to 0, LPTD will be disabled (parameters will still be sent).
# byte[4-n] are the LPTD parameters.
# By default, LPTD is enabled and default settings are used.
# See nfc_hal_dm_cfg.c for defaults
#LPTD_CFG={23:B9:21:01:02:FF:FF:04:A0:0F:40:00:80:02:02:10:00:00:00:31:0C:30:00:00:00:00:00:00:00:00:00:00:00:00:00:00}
###############################################################################
# Startup Configuration (100 bytes maximum)
#
# For the 0xCA parameter, byte[9] (marked by 'AA') is for UICC0, and byte[10] (marked by BB) is
# for UICC1. The values are defined as:
# 0 : UICCx only supports ISO_DEP in low power mode.
# 2 : UICCx only supports Mifare in low power mode.
# 3 : UICCx supports both ISO_DEP and Mifare in low power mode.
#
# AA BB
#NFA_DM_START_UP_CFG={1F:CB:01:01:A5:01:01:CA:14:00:00:00:00:06:E8:03:00:00:00:00:00:00:00:00:00:00:00:00:00:80:01:01}
###############################################################################
# Startup Vendor Specific Configuration (100 bytes maximum);
# byte[0] TLV total len = 0x5
# byte[1] NCI_MTS_CMD|NCI_GID_PROP = 0x2f
# byte[2] NCI_MSG_FRAME_LOG = 0x9
# byte[3] 2
# byte[4] 0=turn off RF frame logging; 1=turn on
# byte[5] 0=turn off SWP frame logging; 1=turn on
# NFA_DM_START_UP_VSC_CFG={05:2F:09:02:01:01}
###############################################################################
# Antenna Configuration - This data is used when setting 0xC8 config item
# at startup (before discovery is started). If not used, no value is sent.
#
# The settings for this value are documented here:
# http://wcgbu.broadcom.com/wpan/PM/Project%20Document%20Library/bcm20791B0/
# Design/Doc/PHY%20register%20settings/BCM20791-B2-1027-02_PHY_Recommended_Reg_Settings.xlsx
# This document is maintained by Paul Forshaw.
#
# The values marked as ?? should be tweaked per antenna or customer/app:
# {20:C8:1E:06:??:00:??:??:??:00:??:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:??:01:00:00:40:04}
# array[0] = 0x20 is length of the payload from array[1] to the end
# array[1] = 0xC8 is PREINIT_DSP_CFG
#PREINIT_DSP_CFG={20:C8:1E:06:1F:00:0F:03:3C:00:04:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:48:01:00:00:40:04}
###############################################################################
# Configure crystal frequency when internal LPO can't detect the frequency.
#XTAL_FREQUENCY=0
###############################################################################
# Configure the default Destination Gate used by HCI (the default is 4, which
# is the ETSI loopback gate.
NFA_HCI_DEFAULT_DEST_GATE=0xF0
###############################################################################
# Configure the single default SE to use. The default is to use the first
# SE that is detected by the stack. This value might be used when the phone
# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use
# one of them (e.g. 0xF4).
#ACTIVE_SE=0xF3
###############################################################################
# Configure the default NfcA/IsoDep techology and protocol route. Can be
# either a secure element (e.g. 0xF4) or the host (0x00)
#DEFAULT_ISODEP_ROUTE=0x00
###############################################################################
# Configure the NFC Extras to open and use a static pipe. If the value is
# not set or set to 0, then the default is use a dynamic pipe based on a
# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value
# for each UICC (where F3="UICC0" and F4="UICC1")
#NFA_HCI_STATIC_PIPE_ID_F3=0x70
#NFA_HCI_STATIC_PIPE_ID_01=0x19
NFA_HCI_STATIC_PIPE_ID_C0=0x19
###############################################################################
# When disconnecting from Oberthur secure element, perform a warm-reset of
# the secure element to deselect the applet.
# The default hex value of the command is 0x3. If this variable is undefined,
# then this feature is not used.
#OBERTHUR_WARM_RESET_COMMAND=0x03
###############################################################################
# Force UICC to only listen to the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
UICC_LISTEN_TECH_MASK=0x07
# Forcing HOST to listen for a selected technology
# 0x00 : Disable Host Listen
# 0x01 : Enable Host Listen for Tech A
# 0x02 : Enable Host Listen for Tech B
# 0x03 : Enable Host Listen for Tech AB
HOST_LISTEN_TECH_MASK=0x03
###############################################################################
# Enabling/Disabling Forward functionality
# Disable 0x00
# Enable 0x01
NXP_FWD_FUNCTIONALITY_ENABLE=0x01
###############################################################################
# Allow UICC to be powered off if there is no traffic.
# Timeout is in ms. If set to 0, then UICC will not be powered off.
#UICC_IDLE_TIMEOUT=30000
UICC_IDLE_TIMEOUT=0
###############################################################################
# AID for Empty Select command
# If specified, this AID will be substituted when an Empty SELECT command is
# detected. The first byte is the length of the AID. Maximum length is 16.
AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
###############################################################################
# Maximum Number of Credits to be allowed by the NFCC
# This value overrides what the NFCC specifices allowing the host to have
# the control to work-around transport limitations. If this value does
# not exist or is set to 0, the NFCC will provide the number of credits.
MAX_RF_DATA_CREDITS=1
###############################################################################
# This setting allows you to disable registering the T4t Virtual SE that causes
# the NFCC to send PPSE requests to the DH.
# The default setting is enabled (i.e. T4t Virtual SE is registered).
#REGISTER_VIRTUAL_SE=1
###############################################################################
# When screen is turned off, specify the desired power state of the controller.
# 0: power-off-sleep state; DEFAULT
# 1: full-power state
# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
SCREEN_OFF_POWER_STATE=1
###############################################################################
# Firmware patch file
# If the value is not set then patch download is disabled.
#FW_PATCH="/vendor/firmware/bcm2079x_firmware.ncd"
###############################################################################
# Firmware pre-patch file (sent before the above patch file)
# If the value is not set then pre-patch is not used.
#FW_PRE_PATCH="/vendor/firmware/bcm2079x_pre_firmware.ncd"
###############################################################################
# Firmware patch format
# 1 = HCD
# 2 = NCD (default)
#NFA_CONFIG_FORMAT=2
###############################################################################
# SPD Debug mode
# If set to 1, any failure of downloading a patch will trigger a hard-stop
#SPD_DEBUG=0
###############################################################################
# SPD Max Retry Count
# The number of attempts to download a patch before giving up (defualt is 3).
# Note, this resets after a power-cycle.
#SPD_MAX_RETRY_COUNT=3
###############################################################################
# transport driver
#
# TRANSPORT_DRIVER=<driver>
#
# where <driver> can be, for example:
# "/dev/ttyS" (UART)
# "/dev/bcmi2cnfc" (I2C)
# "hwtun" (HW Tunnel)
# "/dev/bcmspinfc" (SPI)
# "/dev/btusb0" (BT USB)
#TRANSPORT_DRIVER="/dev/bcm2079x-i2c"
###############################################################################
# power control driver
# Specify a kernel driver that support ioctl commands to control NFC_EN and
# NFC_WAKE gpio signals.
#
# POWER_CONTRL_DRIVER=<driver>
# where <driver> can be, for example:
# "/dev/nfcpower"
# "/dev/bcmi2cnfc" (I2C)
# "/dev/bcmspinfc" (SPI)
# i2c and spi driver may be used to control NFC_EN and NFC_WAKE signal
#POWER_CONTROL_DRIVER="/dev/bcm2079x-i2c"
###############################################################################
# I2C transport driver options
# Mako does not support 10-bit I2C addresses
# Revert to 7-bit address
#BCMI2CNFC_ADDRESS=0x77
###############################################################################
# I2C transport driver try to read multiple packets in read() if data is available
# remove the comment below to enable this feature
#READ_MULTIPLE_PACKETS=1
###############################################################################
# SPI transport driver options
#SPI_NEGOTIATION={0A:F0:00:01:00:00:00:FF:FF:00:00}
###############################################################################
# UART transport driver options
#
# PORT=1,2,3,...
# BAUD=115200, 19200, 9600, 4800,
# DATABITS=8, 7, 6, 5
# PARITY="even" | "odd" | "none"
# STOPBITS="0" | "1" | "1.5" | "2"
#UART_PORT=2
#UART_BAUD=115200
#UART_DATABITS=8
#UART_PARITY="none"
#UART_STOPBITS="1"
###############################################################################
# Insert a delay in microseconds per byte after a write to NFCC.
# after writing a block of data to the NFCC, delay this an amopunt of time before
# writing next block of data. the delay is calculated as below
# NFC_WRITE_DELAY * (number of byte written) / 1000 milliseconds
# e.g. after 259 bytes is written, delay (259 * 20 / 1000) 5 ms before next write
#NFC_WRITE_DELAY=20
###############################################################################
# Maximum Number of Credits to be allowed by the NFCC
# This value overrides what the NFCC specifices allowing the host to have
# the control to work-around transport limitations. If this value does
# not exist or is set to 0, the NFCC will provide the number of credits.
MAX_RF_DATA_CREDITS=1
###############################################################################
# Default poll duration (in ms)
# The defualt is 500ms if not set (see nfc_target.h)
#NFA_DM_DISC_DURATION_POLL=333
###############################################################################
# Antenna Configuration - This data is used when setting 0xC8 config item
# at startup (before discovery is started). If not used, no value is sent.
#
# The settings for this value are documented here:
# http://wcgbu.broadcom.com/wpan/PM/Project%20Document%20Library/bcm20791B0/
# Design/Doc/PHY%20register%20settings/BCM20791-B2-1027-02_PHY_Recommended_Reg_Settings.xlsx
# This document is maintained by Paul Forshaw.
#
# The values marked as ?? should be tweaked per antenna or customer/app:
# {20:C8:1E:06:??:00:??:??:??:00:??:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:??:01:00:00:40:04}
# array[0] = 0x20 is length of the payload from array[1] to the end
# array[1] = 0xC8 is PREINIT_DSP_CFG
#PREINIT_DSP_CFG={20:C8:1E:06:1F:00:0F:03:3C:00:04:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:48:01:00:00:40:04}
###############################################################################
# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1.
# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
# 2 NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate
# 3 NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0
# 4 NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3
PRESENCE_CHECK_ALGORITHM=1
###############################################################################
# Force tag polling for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
#
# Notable bits:
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */
# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
POLLING_TECH_MASK=0xEF
###############################################################################
# Force P2P to only listen for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
#
# Notable bits:
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */
# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */
P2P_LISTEN_TECH_MASK=0xC5
PRESERVE_STORAGE=0x01
###############################################################################
# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
# The value is set to 3 by default as it assumes we will discover 0xF2,
# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
# so that the stack will not wait any longer than necessary.
# Maximum EE supported number
# NXP PN547C2 0x02
# NXP PN65T 0x03
# NXP PN548C2 0x02
# NXP PN66T 0x03
NFA_MAX_EE_SUPPORTED=0x02
###############################################################################
# NCI Hal Module name
NCI_HAL_MODULE="nfc_nci.pn54x"
##############################################################################
# Deactivate notification wait time out in seconds used in ETSI Reader mode
# 0 - Infinite wait
NFA_DM_DISC_NTF_TIMEOUT=100
###############################################################################
# AID_MATCHING constants
# AID_MATCHING_EXACT_ONLY 0x00
# AID_MATCHING_EXACT_OR_PREFIX 0x01
# AID_MATCHING_PREFIX_ONLY 0x02
AID_MATCHING_MODE=0x01
###############################################################################
# Default Secure Element route id
DEFAULT_OFFHOST_ROUTE=0x02
###############################################################################
# Vendor Specific Proprietary Protocol & Discovery Configuration
# Set to 0xFF if unsupported
# byte[0] NCI_PROTOCOL_18092_ACTIVE
# byte[1] NCI_PROTOCOL_B_PRIME
# byte[2] NCI_PROTOCOL_DUAL
# byte[3] NCI_PROTOCOL_15693
# byte[4] NCI_PROTOCOL_KOVIO
# byte[5] NCI_PROTOCOL_MIFARE
# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
NFA_PROPRIETARY_CFG={05:FF:FF:06:81:80:70:FF:FF}
#################################################################################
# Bail out mode
# If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
NFA_POLL_BAIL_OUT_MODE=0x01
#################################################################################

361
configs/libnfc-nxp.conf Normal file
View File

@@ -0,0 +1,361 @@
###############################################################################
## Modified by Motorola Mobility LLC
## Version : 3.5.2 (2016/06/21)
## added RF Blk 4 (21 to 22) and rf blk 5 (from 47 to 77) and rf blk 6 (from 10 to 00)
## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547)
## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547)
## CLIF_ANA_TX_AMPLITUDE_REG_TYPE_B_TERMINAL_M
## CLIF_ANA_TX_AMPLITUDE_REG_TYPE_B_TERMINAL_M change 90 to 00
###############################################################################
# Application options
# Logging Levels
# NXPLOG_DEFAULT_LOGLEVEL 0x01
# ANDROID_LOG_DEBUG 0x03
# ANDROID_LOG_WARN 0x02
# ANDROID_LOG_ERROR 0x01
# ANDROID_LOG_SILENT 0x00
#
NXPLOG_EXTNS_LOGLEVEL=0x03
NXPLOG_NCIHAL_LOGLEVEL=0x03
NXPLOG_NCIX_LOGLEVEL=0x03
NXPLOG_NCIR_LOGLEVEL=0x03
NXPLOG_FWDNLD_LOGLEVEL=0x03
NXPLOG_TML_LOGLEVEL=0x03
###############################################################################
# Nfc Device Node name
NXP_NFC_DEV_NODE="/dev/pn544"
###############################################################################
# Extension for Mifare reader enable
MIFARE_READER_ENABLE=0x01
###############################################################################
# Vzw Feature enable
VZW_FEATURE_ENABLE=0x01
###############################################################################
# File name for Firmware
NXP_FW_NAME="libpn548ad_fw.so"
###############################################################################
# System clock source selection configuration
#define CLK_SRC_XTAL 1
#define CLK_SRC_PLL 2
NXP_SYS_CLK_SRC_SEL=0x01
###############################################################################
# System clock frequency selection configuration
#define CLK_FREQ_13MHZ 1
#define CLK_FREQ_19_2MHZ 2
#define CLK_FREQ_24MHZ 3
#define CLK_FREQ_26MHZ 4
#define CLK_FREQ_38_4MHZ 5
#define CLK_FREQ_52MHZ 6
NXP_SYS_CLK_FREQ_SEL=0x04
###############################################################################
# The timeout value to be used for clock request acknowledgment
# min value = 0x01 to max = 0x06
NXP_SYS_CLOCK_TO_CFG=0x01
###############################################################################
# NXP proprietary settings
NXP_ACT_PROP_EXTN={2F, 02, 00}
###############################################################################
# NFC forum profile settings
NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
###############################################################################
# NFCC Configuration Control
# Allow NFCC to manage RF Config 0x01
# Don't allow NFCC to manage RF Config 0x00
NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01}
###############################################################################
# Standby enable settings
NXP_CORE_STANDBY={2F, 00, 01, 01}
###############################################################################
# NXP TVDD configurations settings
# Allow NFCC to configure External TVDD, There are currently three
#configurations (1, 2 and 3) are supported, out of them only one can be
#supported.
NXP_EXT_TVDD_CFG=0x02
#config1:SLALM, 3.3V for both RM and CM
NXP_EXT_TVDD_CFG_1={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 02, 09, 00}
#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
#monitoring 5V from DCDC, 4.7V for both RM and CM, DCDCWaitTime=4.2ms
NXP_EXT_TVDD_CFG_2={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 56, 64, 0A}
#config3: use DCDC in CE, use Tx_Pwr_Req, SLALM, monitoring 5V from DCDC,
#DCDCWaitTime=4.2ms
NXP_EXT_TVDD_CFG_3={20, 02, 0B, 02, A0, 66, 01, 01, A0, 0E, 03, 52, 64, 0A}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform
NXP_RF_CONF_BLK_1={
20, 02, 1E, 2,
A0, 1D, 11, 54, 33, 14, 17, 00, AA, 85, 00, 80, 55, 2A, 04, 00, 63, 00, 00, 00,
A0, 0D, 06, 06, 03, 00, 6F, 00, 20
}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform
NXP_RF_CONF_BLK_2={
20, 02, 13, 02,
A0, 0D, 06, 06, 30, B0, 00, 10, 00,
A0, 0D, 06, 7C, 30, B0, 00, 10, 00
}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform
NXP_RF_CONF_BLK_3={
20, 02, 07, 01,
A0, 0D, 03, 00, 40, 03
}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform
# RF_CLIF_CFG_BR_106_I_RXA_P CLIF_ANA_RX_REG change from 21 to 22
NXP_RF_CONF_BLK_4={
20, 02, 1D, 04,
A0, 0D, 04, 34, 44, 22, 00,
A0, 0D, 04, 46, 44, 22, 00,
A0, 0D, 04, 56, 44, 22, 00,
A0, 0D, 04, 5C, 44, 26, 00
}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform, Min_level
# RF_CLIF_CFG_BR_106_I_RXA_P CLIF_SIGPRO_RM_CONFIG1_REG change from 47 to 77
NXP_RF_CONF_BLK_5={
20, 02, 0A, 01,
A0, 0D, 06, 34, 2D, 24, 77, 0C, 00
}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform
# RF_CLIF_CFG_BR_106_I_TXA CLIF_ANA_TX_AMPLITUDE_REG change from 10 to 00
# RF_CLIF_CFG_BR_106_T_TXB
NXP_RF_CONF_BLK_6={
20, 02, 2E, 05,
A0, 0D, 06, 32, 42, F8, 00, FF, FF,
A0, 0D, 06, 44, 42, 88, 00, FF, FF,
A0, 0D, 06, 54, 42, 88, 00, FF, FF,
A0, 0D, 06, 5A, 42, 90, 00, FF, FF,
A0, 0D, 06, 98, 42, 00, 00, FF, FF
}
###############################################################################
## Set configuration optimization decision setting
## Enable = 0x01
## Disable = 0x00
NXP_SET_CONFIG_ALWAYS=0x01
###############################################################################
# Core configuration extensions
# It includes
# Wired mode settings A0ED, A0EE
# Tag Detector A040, A041, A043
# Low Power mode A007
# Clock settings A002, A003
# PbF settings A008
NXP_CORE_CONF_EXTN={20, 02, 1D, 07,
A0, EC, 01, 01,
A0, ED, 01, 00,
A0, 5E, 01, 01,
A0, 40, 01, 01,
A0, DD, 01, 2D,
A0, 41, 01, 02,
A0, 96, 01, 01
}
# A0, 41, 01, 02,
# A0, 43, 01, 04,
# A0, 02, 01, 01,
# A0, 03, 01, 11,
# A0, 07, 01, 03,
# A0, 08, 01, 01
# }
###############################################################################
# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit
NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01
}
###############################################################################
# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set to 0x00
NXP_I2C_FRAGMENTATION_ENABLED=0x00
###############################################################################
# Core configuration settings
NXP_CORE_CONF={ 20, 02, 31, 0F,
28, 01, 00,
21, 01, 00,
30, 01, 08,
31, 01, 03,
33, 04, 01, 02, 03, 04,
54, 01, 06,
50, 01, 02,
5B, 01, 00,
60, 01, 0E,
80, 01, 01,
81, 01, 01,
82, 01, 0E,
18, 01, 01,
32, 01, 60,
38, 01, 01
}
###############################################################################
# Mifare Classic Key settings
#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5,
# A0, 52, 06, D3, F7, D3, F7, D3, F7,
# A0, 53, 06, FF, FF, FF, FF, FF, FF,
# A0, 54, 06, 00, 00, 00, 00, 00, 00}
###############################################################################
# Default SE Options
# No secure element 0x00
# eSE 0x01
# UICC 0x02
NXP_DEFAULT_SE=0x02
###############################################################################
#Enable SWP full power mode when phone is power off
NXP_SWP_FULL_PWR_ON=0x00
###############################################################################
#### Select the CHIP ####
#PN547C2 0x01
#PN65T 0x02
#PN548AD 0x03
#PN66T 0x04
NXP_NFC_CHIP=0x03
###############################################################################
# CE when Screen state is locked
# Disable 0x00
# Enable 0x01
NXP_CE_ROUTE_STRICT_DISABLE=0x01
#Timeout in secs to get NFCEE Discover notification
NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
NXP_DEFAULT_NFCEE_TIMEOUT=0x06
#Timeout in secs
NXP_SWP_RD_START_TIMEOUT=0x0A
#Timeout in secs
NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
###############################################################################
#Set the default AID route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_AID_ROUTE=0x02
###############################################################################
#Set the Mifare Desfire route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_DESFIRE_ROUTE=0x02
###############################################################################
#Set the Mifare CLT route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_MIFARE_CLT_ROUTE=0x02
###############################################################################
#Set the default AID Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Lock
# bit pos 4 = Screen Off
DEFAULT_AID_PWR_STATE=0x9
###############################################################################
#Set the Mifare Desfire Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Lock
# bit pos 4 = Screen Off
DEFAULT_DESFIRE_PWR_STATE=0x1B
###############################################################################
#Set the Mifare CLT Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Lock
# bit pos 4 = Screen Off
DEFAULT_MIFARE_CLT_PWR_STATE=0x1B
###############################################################################
# AID Matching platform options
# AID_MATCHING_L 0x01
# AID_MATCHING_K 0x02
AID_MATCHING_PLATFORM=0x01
###############################################################################
#CHINA_TIANJIN_RF_SETTING
#Enable 0x01
#Disable 0x00
NXP_CHINA_TIANJIN_RF_ENABLED=0x01
###############################################################################
#SWP_SWITCH_TIMEOUT_SETTING
# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
# Timeout in milliseconds, for example
# No Timeout 0x00
# 10 millisecond timeout 0x0A
NXP_SWP_SWITCH_TIMEOUT=0x0A
###############################################################################
#Dynamic RSSI feature enable
# Disable 0x00
# Enable 0x01
NXP_AGC_DEBUG_ENABLE=0x00
###############################################################################
#Config to allow adding aids
#NFC on/off is required after this config
#1 = enabling adding aid to NFCC routing table.
#0 = disabling adding aid to NFCC routing table.
NXP_ENABLE_ADD_AID=0x01
################################################################################
# Enable/Disable checking default proto SE Id
# Disable 0x00
# Enable 0x01
NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
###############################################################################
# UICC mode supported
# Disable 0x00
# Enable 0x01
NXP_DUAL_UICC_ENABLE=0x00

346
configs/libnfc-nxp_ds.conf Normal file
View File

@@ -0,0 +1,346 @@
###############################################################################
## Modified by Motorola Mobility LLC
## Version : 3.5.2 (2016/05/26)
## Dual SIM with switcher HW
## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547)
## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547)
###############################################################################
# Application options
# Logging Levels
# NXPLOG_DEFAULT_LOGLEVEL 0x01
# ANDROID_LOG_DEBUG 0x03
# ANDROID_LOG_WARN 0x02
# ANDROID_LOG_ERROR 0x01
# ANDROID_LOG_SILENT 0x00
#
NXPLOG_EXTNS_LOGLEVEL=0x03
NXPLOG_NCIHAL_LOGLEVEL=0x03
NXPLOG_NCIX_LOGLEVEL=0x03
NXPLOG_NCIR_LOGLEVEL=0x03
NXPLOG_FWDNLD_LOGLEVEL=0x03
NXPLOG_TML_LOGLEVEL=0x03
###############################################################################
# Nfc Device Node name
NXP_NFC_DEV_NODE="/dev/pn544"
###############################################################################
# Extension for Mifare reader enable
MIFARE_READER_ENABLE=0x01
###############################################################################
# Vzw Feature enable
VZW_FEATURE_ENABLE=0x01
###############################################################################
# File name for Firmware
NXP_FW_NAME="libpn548ad_fw.so"
###############################################################################
# System clock source selection configuration
#define CLK_SRC_XTAL 1
#define CLK_SRC_PLL 2
NXP_SYS_CLK_SRC_SEL=0x01
###############################################################################
# System clock frequency selection configuration
#define CLK_FREQ_13MHZ 1
#define CLK_FREQ_19_2MHZ 2
#define CLK_FREQ_24MHZ 3
#define CLK_FREQ_26MHZ 4
#define CLK_FREQ_38_4MHZ 5
#define CLK_FREQ_52MHZ 6
NXP_SYS_CLK_FREQ_SEL=0x04
###############################################################################
# The timeout value to be used for clock request acknowledgment
# min value = 0x01 to max = 0x06
NXP_SYS_CLOCK_TO_CFG=0x01
###############################################################################
# NXP proprietary settings
NXP_ACT_PROP_EXTN={2F, 02, 00}
###############################################################################
# NFC forum profile settings
NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
###############################################################################
# NFCC Configuration Control
# Allow NFCC to manage RF Config 0x01
# Don't allow NFCC to manage RF Config 0x00
NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01}
###############################################################################
# Standby enable settings
NXP_CORE_STANDBY={2F, 00, 01, 01}
###############################################################################
# NXP TVDD configurations settings
# Allow NFCC to configure External TVDD, There are currently three
#configurations (1, 2 and 3) are supported, out of them only one can be
#supported.
NXP_EXT_TVDD_CFG=0x02
#config1:SLALM, 3.3V for both RM and CM
NXP_EXT_TVDD_CFG_1={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 02, 09, 00}
#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
#monitoring 5V from DCDC, 4.7V for both RM and CM, DCDCWaitTime=4.2ms
# No Dual SIM
#NXP_EXT_TVDD_CFG_2={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 56, 64, 0A}
# Dual SIM - bit 7 of the second value should be set to 1
NXP_EXT_TVDD_CFG_2={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 56, E4, 0A}
#config3: use DCDC in CE, use Tx_Pwr_Req, SLALM, monitoring 5V from DCDC,
#DCDCWaitTime=4.2ms
NXP_EXT_TVDD_CFG_3={20, 02, 0B, 02, A0, 66, 01, 01, A0, 0E, 03, 52, 64, 0A}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform
NXP_RF_CONF_BLK_1={
20, 02, 1E, 2,
A0, 1D, 11, 54, 33, 14, 17, 00, AA, 85, 00, 80, 55, 2A, 04, 00, 63, 00, 00, 00,
A0, 0D, 06, 06, 03, 00, 73, 00, 20
}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform
NXP_RF_CONF_BLK_2={
20, 02, 13, 02,
A0, 0D, 06, 06, 30, B0, 00, 10, 00,
A0, 0D, 06, 7C, 30, B0, 00, 10, 00
}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform
NXP_RF_CONF_BLK_3={
20, 02, 07, 01,
A0, 0D, 03, 00, 40, 03
}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform
#NXP_RF_CONF_BLK_4={
#}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform, Min_level
#NXP_RF_CONF_BLK_5={
#}
###############################################################################
# NXP RF configuration ALM/PLM settings
# This section needs to be updated with the correct values based on the platform
#NXP_RF_CONF_BLK_6={
#}
###############################################################################
## Set configuration optimization decision setting
## Enable = 0x01
## Disable = 0x00
NXP_SET_CONFIG_ALWAYS=0x01
###############################################################################
# Core configuration extensions
# It includes
# Wired mode settings A0ED, A0EE
# Tag Detector A040, A041, A043
# Low Power mode A007
# Clock settings A002, A003
# PbF settings A008
NXP_CORE_CONF_EXTN={20, 02, 1D, 07,
A0, EC, 01, 11,
A0, ED, 01, 00,
A0, 5E, 01, 01,
A0, 40, 01, 01,
A0, DD, 01, 2D,
A0, 41, 01, 02,
A0, 96, 01, 01
}
# A0, 41, 01, 02,
# A0, 43, 01, 04,
# A0, 02, 01, 01,
# A0, 03, 01, 11,
# A0, 07, 01, 03,
# A0, 08, 01, 01
# }
###############################################################################
# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit
NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01
}
###############################################################################
# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set to 0x00
NXP_I2C_FRAGMENTATION_ENABLED=0x00
###############################################################################
# Core configuration settings
NXP_CORE_CONF={ 20, 02, 31, 0F,
28, 01, 00,
21, 01, 00,
30, 01, 08,
31, 01, 03,
33, 04, 01, 02, 03, 04,
54, 01, 06,
50, 01, 02,
5B, 01, 00,
60, 01, 0E,
80, 01, 01,
81, 01, 01,
82, 01, 0E,
18, 01, 01,
32, 01, 60,
38, 01, 01
}
###############################################################################
# Mifare Classic Key settings
#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5,
# A0, 52, 06, D3, F7, D3, F7, D3, F7,
# A0, 53, 06, FF, FF, FF, FF, FF, FF,
# A0, 54, 06, 00, 00, 00, 00, 00, 00}
###############################################################################
# Default SE Options
# No secure element 0x00
# eSE 0x01
# UICC 0x02
NXP_DEFAULT_SE=0x02
###############################################################################
#Enable SWP full power mode when phone is power off
NXP_SWP_FULL_PWR_ON=0x00
###############################################################################
#### Select the CHIP ####
#PN547C2 0x01
#PN65T 0x02
#PN548AD 0x03
#PN66T 0x04
NXP_NFC_CHIP=0x03
###############################################################################
# CE when Screen state is locked
# Disable 0x00
# Enable 0x01
NXP_CE_ROUTE_STRICT_DISABLE=0x01
#Timeout in secs to get NFCEE Discover notification
NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
NXP_DEFAULT_NFCEE_TIMEOUT=0x06
#Timeout in secs
NXP_SWP_RD_START_TIMEOUT=0x0A
#Timeout in secs
NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
###############################################################################
#Set the default AID route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_AID_ROUTE=0x00
###############################################################################
#Set the Mifare Desfire route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_DESFIRE_ROUTE=0x02
###############################################################################
#Set the Mifare CLT route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_MIFARE_CLT_ROUTE=0x02
###############################################################################
#Set the default AID Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Lock
# bit pos 4 = Screen Off
DEFAULT_AID_PWR_STATE=0x9
###############################################################################
#Set the Mifare Desfire Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Lock
# bit pos 4 = Screen Off
DEFAULT_DESFIRE_PWR_STATE=0x1B
###############################################################################
#Set the Mifare CLT Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Lock
# bit pos 4 = Screen Off
DEFAULT_MIFARE_CLT_PWR_STATE=0x1B
###############################################################################
# AID Matching platform options
# AID_MATCHING_L 0x01
# AID_MATCHING_K 0x02
AID_MATCHING_PLATFORM=0x01
###############################################################################
#CHINA_TIANJIN_RF_SETTING
#Enable 0x01
#Disable 0x00
NXP_CHINA_TIANJIN_RF_ENABLED=0x01
###############################################################################
#SWP_SWITCH_TIMEOUT_SETTING
# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
# Timeout in milliseconds, for example
# No Timeout 0x00
# 10 millisecond timeout 0x0A
NXP_SWP_SWITCH_TIMEOUT=0x0A
###############################################################################
#Dynamic RSSI feature enable
# Disable 0x00
# Enable 0x01
NXP_AGC_DEBUG_ENABLE=0x00
###############################################################################
#Config to allow adding aids
#NFC on/off is required after this config
#1 = enabling adding aid to NFCC routing table.
#0 = disabling adding aid to NFCC routing table.
NXP_ENABLE_ADD_AID=0x01
################################################################################
# Enable/Disable checking default proto SE Id
# Disable 0x00
# Enable 0x01
NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
###############################################################################
# UICC mode supported
# Disable 0x00
# Enable 0x01
NXP_DUAL_UICC_ENABLE=0x01

177
configs/media_codecs.xml Normal file
View File

@@ -0,0 +1,177 @@
<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2013 The Android Open Source Project
Copyright (C) 2015-2016 The Linux Foundation. All rights reserved.
Not a contribution.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<MediaCodecs>
<Include href="media_codecs_google_audio.xml" />
<Include href="media_codecs_google_telephony.xml" />
<Settings>
<Setting name="max-video-encoder-input-buffers" value="11" />
</Settings>
<Encoders>
<!-- Video Hardware -->
<MediaCodec name="OMX.qcom.video.encoder.hevc" type="video/hevc" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Quirk name="requires-loaded-to-idle-after-allocation" />
<Limit name="size" min="176x64" max="3840x2160" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="972000" />
<Limit name="bitrate" range="1-100000000" />
<Limit name="concurrent-instances" max="16" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.encoder.avc" type="video/avc" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Quirk name="requires-loaded-to-idle-after-allocation" />
<Limit name="size" min="96x64" max="3840x2160" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="972000" />
<Limit name="bitrate" range="1-100000000" />
<Limit name="concurrent-instances" max="16" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.encoder.mpeg4" type="video/mp4v-es" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Quirk name="requires-loaded-to-idle-after-allocation"/>
<Limit name="size" min="96x64" max="1920x1088" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="244800" />
<Limit name="bitrate" range="1-40000000" />
<Limit name="concurrent-instances" max="16" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.encoder.h263" type="video/3gpp" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Quirk name="requires-loaded-to-idle-after-allocation" />
<Limit name="size" min="96x64" max="864x480" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="48600" />
<Limit name="bitrate" range="1-2000000" />
<Limit name="concurrent-instances" max="16" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.encoder.vp8" type="video/x-vnd.on2.vp8" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Quirk name="requires-loaded-to-idle-after-allocation" />
<Limit name="size" min="96x64" max="1920x1088" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="244800" />
<Limit name="bitrate" range="1-40000000" />
<Limit name="concurrent-instances" max="16" />
</MediaCodec>
</Encoders>
<Decoders>
<!-- Video Hardware -->
<MediaCodec name="OMX.qcom.video.decoder.avc" type="video/avc" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Limit name="size" min="64x64" max="3840x2160" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="972000" />
<Limit name="bitrate" range="1-100000000" />
<Feature name="adaptive-playback" />
<Limit name="concurrent-instances" max="13" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.avc.secure" type="video/avc" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Limit name="size" min="64x64" max="1920x1088" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="489600" />
<Limit name="bitrate" range="1-60000000" />
<Feature name="adaptive-playback" />
<Feature name="secure-playback" required="true" />
<Limit name="concurrent-instances" max="3" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.mpeg2" type="video/mpeg2" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Limit name="size" min="96x64" max="1920x1088" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="244800" />
<Limit name="bitrate" range="1-40000000" />
<Feature name="adaptive-playback" />
<Limit name="concurrent-instances" max="16" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.mpeg4" type="video/mp4v-es" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Limit name="size" min="64x64" max="1920x1088" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="489600" />
<Limit name="bitrate" range="1-60000000" />
<Feature name="adaptive-playback" />
<Limit name="concurrent-instances" max="16" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.h263" type="video/3gpp" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Limit name="size" min="64x64" max="864x480" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="48600" />
<Limit name="bitrate" range="1-2000000" />
<Feature name="adaptive-playback" />
<Limit name="concurrent-instances" max="16" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.hevc" type="video/hevc" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Limit name="size" min="64x64" max="3840x2160" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="972000" />
<Limit name="bitrate" range="1-100000000" />
<Feature name="adaptive-playback" />
<Limit name="concurrent-instances" max="13" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.vp8" type="video/x-vnd.on2.vp8" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Limit name="size" min="64x64" max="3840x2160" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="972000" />
<Limit name="bitrate" range="1-100000000" />
<Feature name="adaptive-playback" />
<Limit name="concurrent-instances" max="16" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.vp9" type="video/x-vnd.on2.vp9" >
<Quirk name="requires-allocate-on-input-ports" />
<Quirk name="requires-allocate-on-output-ports" />
<Limit name="size" min="64x64" max="3840x2160" />
<Limit name="alignment" value="2x2" />
<Limit name="block-size" value="16x16" />
<Limit name="blocks-per-second" min="1" max="972000" />
<Limit name="bitrate" range="1-100000000" />
<Feature name="adaptive-playback" />
<Limit name="concurrent-instances" max="16" />
</MediaCodec>
<!-- Audio Software -->
<MediaCodec name="OMX.qti.audio.decoder.flac" type="audio/flac" />
</Decoders>
<Include href="media_codecs_google_video.xml" />
</MediaCodecs>

138
configs/media_codecs_performance.xml Normal file
View File

@@ -0,0 +1,138 @@
<?xml version="1.0" encoding="utf-8" ?>
<!-- Copyright (c) 2016, The Linux Foundation. All rights reserved.
Not a Contribution.
Copyright 2016 The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<MediaCodecs>
<Encoders>
<MediaCodec name="OMX.google.h263.encoder" type="video/3gpp" update="true">
<Limit name="measured-frame-rate-176x144" range="374-377" />
</MediaCodec>
<MediaCodec name="OMX.google.h264.encoder" type="video/avc" update="true">
<Limit name="measured-frame-rate-320x240" range="245-250" />
<Limit name="measured-frame-rate-720x480" range="96-97" />
<Limit name="measured-frame-rate-1280x720" range="48-48" />
<Limit name="measured-frame-rate-1920x1080" range="24-24" />
</MediaCodec>
<MediaCodec name="OMX.google.mpeg4.encoder" type="video/mp4v-es" update="true">
<Limit name="measured-frame-rate-176x144" range="382-385" />
</MediaCodec>
<MediaCodec name="OMX.google.vp8.encoder" type="video/x-vnd.on2.vp8" update="true">
<Limit name="measured-frame-rate-320x180" range="111-112" />
<Limit name="measured-frame-rate-640x360" range="37-37" />
<Limit name="measured-frame-rate-1280x720" range="33-33" />
<Limit name="measured-frame-rate-1920x1080" range="19-19" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.encoder.avc" type="video/avc" update="true">
<Limit name="measured-frame-rate-320x240" range="282-285" />
<Limit name="measured-frame-rate-720x480" range="83-83" />
<Limit name="measured-frame-rate-1280x720" range="36-36" />
<Limit name="measured-frame-rate-1920x1080" range="32-32" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.encoder.h263" type="video/3gpp" update="true">
<Limit name="measured-frame-rate-176x144" range="355-358" />
<Limit name="measured-frame-rate-352x288" range="283-284" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.encoder.hevc" type="video/hevc" update="true">
<Limit name="measured-frame-rate-320x240" range="269-272" />
<Limit name="measured-frame-rate-720x480" range="83-83" />
<Limit name="measured-frame-rate-1280x720" range="36-36" />
<Limit name="measured-frame-rate-1920x1080" range="32-32" />
<Limit name="measured-frame-rate-3840x2160" range="9-9" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.encoder.mpeg4" type="video/mp4v-es" update="true">
<Limit name="measured-frame-rate-176x144" range="356-359" />
<Limit name="measured-frame-rate-352x288" range="277-278" />
<Limit name="measured-frame-rate-640x480" range="149-150" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.encoder.vp8" type="video/x-vnd.on2.vp8" update="true">
<Limit name="measured-frame-rate-320x180" range="267-271" />
<Limit name="measured-frame-rate-640x360" range="126-126" />
<Limit name="measured-frame-rate-1280x720" range="34-34" />
<Limit name="measured-frame-rate-1920x1080" range="30-30" />
</MediaCodec>
</Encoders>
<Decoders>
<MediaCodec name="OMX.google.h263.decoder" type="video/3gpp" update="true">
<Limit name="measured-frame-rate-176x144" range="185-191" />
</MediaCodec>
<MediaCodec name="OMX.google.h264.decoder" type="video/avc" update="true">
<Limit name="measured-frame-rate-320x240" range="317-326" />
<Limit name="measured-frame-rate-720x480" range="132-133" />
<Limit name="measured-frame-rate-1280x720" range="57-57" />
<Limit name="measured-frame-rate-1920x1080" range="24-24" />
</MediaCodec>
<MediaCodec name="OMX.google.hevc.decoder" type="video/hevc" update="true">
<Limit name="measured-frame-rate-352x288" range="460-471" />
<Limit name="measured-frame-rate-640x360" range="238-240" />
<Limit name="measured-frame-rate-720x480" range="218-220" />
<Limit name="measured-frame-rate-1280x720" range="97-98" />
<Limit name="measured-frame-rate-1920x1080" range="54-54" />
</MediaCodec>
<MediaCodec name="OMX.google.mpeg4.decoder" type="video/mp4v-es" update="true">
<Limit name="measured-frame-rate-176x144" range="205-210" />
</MediaCodec>
<MediaCodec name="OMX.google.vp8.decoder" type="video/x-vnd.on2.vp8" update="true">
<Limit name="measured-frame-rate-320x180" range="631-634" />
<Limit name="measured-frame-rate-640x360" range="179-182" />
<Limit name="measured-frame-rate-1280x720" range="40-41" />
<Limit name="measured-frame-rate-1920x1080" range="17-17" />
</MediaCodec>
<MediaCodec name="OMX.google.vp9.decoder" type="video/x-vnd.on2.vp9" update="true">
<Limit name="measured-frame-rate-320x180" range="376-382" />
<Limit name="measured-frame-rate-640x360" range="183-183" />
<Limit name="measured-frame-rate-1280x720" range="90-91" />
<Limit name="measured-frame-rate-1920x1080" range="50-50" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.avc" type="video/avc" update="true">
<Limit name="measured-frame-rate-320x240" range="270-275" />
<Limit name="measured-frame-rate-720x480" range="230-233" />
<Limit name="measured-frame-rate-1280x720" range="133-134" />
<Limit name="measured-frame-rate-1920x1080" range="53-53" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.h263" type="video/3gpp" update="true">
<Limit name="measured-frame-rate-176x144" range="422-429" />
<Limit name="measured-frame-rate-352x288" range="427-431" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.hevc" type="video/hevc" update="true">
<Limit name="measured-frame-rate-352x288" range="341-345" />
<Limit name="measured-frame-rate-640x360" range="266-269" />
<Limit name="measured-frame-rate-720x480" range="250-252" />
<Limit name="measured-frame-rate-1280x720" range="120-121" />
<Limit name="measured-frame-rate-1920x1080" range="56-56" />
<Limit name="measured-frame-rate-3840x2160" range="13-13" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.mpeg4" type="video/mp4v-es" update="true">
<Limit name="measured-frame-rate-176x144" range="428-433" />
<Limit name="measured-frame-rate-480x360" range="409-412" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.vp8" type="video/x-vnd.on2.vp8" update="true">
<Limit name="measured-frame-rate-320x180" range="434-436" />
<Limit name="measured-frame-rate-640x360" range="357-358" />
<Limit name="measured-frame-rate-1280x720" range="321-321" />
<Limit name="measured-frame-rate-1920x1080" range="148-148" />
</MediaCodec>
<MediaCodec name="OMX.qcom.video.decoder.vp9" type="video/x-vnd.on2.vp9" update="true">
<Limit name="measured-frame-rate-320x180" range="422-424" />
<Limit name="measured-frame-rate-640x360" range="305-306" />
<Limit name="measured-frame-rate-1280x720" range="308-309" />
<Limit name="measured-frame-rate-1920x1080" range="161-161" />
<Limit name="measured-frame-rate-3840x2160" range="36-36" />
</MediaCodec>
</Decoders>
</MediaCodecs>

515
configs/media_profiles.xml Normal file
View File

@@ -0,0 +1,515 @@
<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2013 The Android Open Source Project
Copyright (C) 2015-2016 The Linux Foundation. All rights reserved.
Not a contribution.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!DOCTYPE MediaSettings [
<!ELEMENT MediaSettings (CamcorderProfiles,
EncoderOutputFileFormat+,
VideoEncoderCap+,
AudioEncoderCap+,
VideoDecoderCap,
AudioDecoderCap)>
<!ELEMENT CamcorderProfiles (EncoderProfile+, ImageEncoding+, ImageDecoding, Camera)>
<!ELEMENT EncoderProfile (Video, Audio)>
<!ATTLIST EncoderProfile quality (high|low) #REQUIRED>
<!ATTLIST EncoderProfile fileFormat (mp4|3gp) #REQUIRED>
<!ATTLIST EncoderProfile duration (30|60) #REQUIRED>
<!ATTLIST EncoderProfile cameraId (0|1) #REQUIRED>
<!ELEMENT Video EMPTY>
<!ATTLIST Video codec (h264|h263|m4v) #REQUIRED>
<!ATTLIST Video bitRate CDATA #REQUIRED>
<!ATTLIST Video width CDATA #REQUIRED>
<!ATTLIST Video height CDATA #REQUIRED>
<!ATTLIST Video frameRate CDATA #REQUIRED>
<!ELEMENT Audio EMPTY>
<!ATTLIST Audio codec (amrnb|amrwb|aac|lpcm) #REQUIRED>
<!ATTLIST Audio bitRate CDATA #REQUIRED>
<!ATTLIST Audio sampleRate CDATA #REQUIRED>
<!ATTLIST Audio channels (1|2|6) #REQUIRED>
<!ELEMENT ImageEncoding EMPTY>
<!ATTLIST ImageEncoding quality (90|80|70|60|50|40) #REQUIRED>
<!ELEMENT ImageDecoding EMPTY>
<!ATTLIST ImageDecoding memCap CDATA #REQUIRED>
<!ELEMENT Camera EMPTY>
<!ELEMENT EncoderOutputFileFormat EMPTY>
<!ATTLIST EncoderOutputFileFormat name (mp4|3gp) #REQUIRED>
<!ELEMENT VideoEncoderCap EMPTY>
<!ATTLIST VideoEncoderCap name (h264|h263|m4v|wmv) #REQUIRED>
<!ATTLIST VideoEncoderCap enabled (true|false) #REQUIRED>
<!ATTLIST VideoEncoderCap minBitRate CDATA #REQUIRED>
<!ATTLIST VideoEncoderCap maxBitRate CDATA #REQUIRED>
<!ATTLIST VideoEncoderCap minFrameWidth CDATA #REQUIRED>
<!ATTLIST VideoEncoderCap maxFrameWidth CDATA #REQUIRED>
<!ATTLIST VideoEncoderCap minFrameHeight CDATA #REQUIRED>
<!ATTLIST VideoEncoderCap maxFrameHeight CDATA #REQUIRED>
<!ATTLIST VideoEncoderCap minFrameRate CDATA #REQUIRED>
<!ATTLIST VideoEncoderCap maxFrameRate CDATA #REQUIRED>
<!ELEMENT AudioEncoderCap EMPTY>
<!ATTLIST AudioEncoderCap name (amrnb|amrwb|aac|heaac|aaceld|wma|lpcm) #REQUIRED>
<!ATTLIST AudioEncoderCap enabled (true|false) #REQUIRED>
<!ATTLIST AudioEncoderCap minBitRate CDATA #REQUIRED>
<!ATTLIST AudioEncoderCap maxBitRate CDATA #REQUIRED>
<!ATTLIST AudioEncoderCap minSampleRate CDATA #REQUIRED>
<!ATTLIST AudioEncoderCap maxSampleRate CDATA #REQUIRED>
<!ATTLIST AudioEncoderCap minChannels (1|2|6) #REQUIRED>
<!ATTLIST AudioEncoderCap maxChannels (1|2|6) #REQUIRED>
<!ELEMENT VideoDecoderCap EMPTY>
<!ATTLIST VideoDecoderCap name (wmv) #REQUIRED>
<!ATTLIST VideoDecoderCap enabled (true|false) #REQUIRED>
<!ELEMENT AudioDecoderCap EMPTY>
<!ATTLIST AudioDecoderCap name (wma) #REQUIRED>
<!ATTLIST AudioDecoderCap enabled (true|false) #REQUIRED>
]>
<!--
This file is used to declare the multimedia profiles and capabilities
on an android-powered device.
-->
<MediaSettings>
<!-- Each camcorder profile defines a set of predefined configuration parameters -->
<!-- Back Camera -->
<CamcorderProfiles cameraId="0">
<EncoderProfile quality="low" fileFormat="3gp" duration="30">
<Video codec="h264"
bitRate="128000"
width="320"
height="240"
frameRate="15" />
<Audio codec="amrnb"
bitRate="12200"
sampleRate="8000"
channels="1" />
</EncoderProfile>
<EncoderProfile quality="high" fileFormat="mp4" duration="10">
<Video codec="h264"
bitRate="51000000"
width="3840"
height="2160"
frameRate="30" />
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="qvga" fileFormat="3gp" duration="30">
<Video codec="h264"
bitRate="128000"
width="320"
height="240"
frameRate="15" />
<Audio codec="amrnb"
bitRate="12200"
sampleRate="8000"
channels="1" />
</EncoderProfile>
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="6000000"
width="720"
height="480"
frameRate="30" />
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="10000000"
width="1280"
height="720"
frameRate="30" />
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="17000000"
width="1920"
height="1080"
frameRate="30" />
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="2160p" fileFormat="mp4" duration="10">
<Video codec="h264"
bitRate="51000000"
width="3840"
height="2160"
frameRate="30" />
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="timelapselow" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="512000"
width="320"
height="240"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="amrnb"
bitRate="12200"
sampleRate="8000"
channels="1" />
</EncoderProfile>
<EncoderProfile quality="timelapsehigh" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="51000000"
width="3840"
height="2160"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="timelapseqvga" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="512000"
width="320"
height="240"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="amrnb"
bitRate="12200"
sampleRate="8000"
channels="1" />
</EncoderProfile>
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="6000000"
width="640"
height="480"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="10000000"
width="1280"
height="720"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="17000000"
width="1920"
height="1080"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="timelapse2160p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="51000000"
width="3840"
height="2160"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<ImageEncoding quality="95" />
<ImageEncoding quality="80" />
<ImageEncoding quality="70" />
<ImageDecoding memCap="20000000" />
</CamcorderProfiles>
<!-- Front Camera -->
<CamcorderProfiles cameraId="1">
<EncoderProfile quality="low" fileFormat="3gp" duration="30">
<Video codec="h264"
bitRate="128000"
width="320"
height="240"
frameRate="15" />
<Audio codec="amrnb"
bitRate="12200"
sampleRate="8000"
channels="1" />
</EncoderProfile>
<EncoderProfile quality="high" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="17000000"
width="1920"
height="1080"
frameRate="30" />
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="qvga" fileFormat="3gp" duration="30">
<Video codec="h264"
bitRate="128000"
width="320"
height="240"
frameRate="15" />
<Audio codec="amrnb"
bitRate="12200"
sampleRate="8000"
channels="1" />
</EncoderProfile>
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="6000000"
width="720"
height="480"
frameRate="30" />
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="10000000"
width="1280"
height="720"
frameRate="30" />
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="17000000"
width="1920"
height="1080"
frameRate="30" />
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="timelapselow" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="512000"
width="320"
height="240"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="amrnb"
bitRate="12200"
sampleRate="8000"
channels="1" />
</EncoderProfile>
<EncoderProfile quality="timelapsehigh" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="17000000"
width="1920"
height="1080"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="timelapseqvga" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="512000"
width="320"
height="240"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="amrnb"
bitRate="12200"
sampleRate="8000"
channels="1" />
</EncoderProfile>
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="6000000"
width="640"
height="480"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="10000000"
width="1280"
height="720"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
<Video codec="h264"
bitRate="17000000"
width="1920"
height="1080"
frameRate="30" />
<!-- audio setting is ignored -->
<Audio codec="aac"
bitRate="128000"
sampleRate="48000"
channels="2" />
</EncoderProfile>
<ImageEncoding quality="95" />
<ImageEncoding quality="80" />
<ImageEncoding quality="70" />
<ImageDecoding memCap="20000000" />
</CamcorderProfiles>
<EncoderOutputFileFormat name="3gp" />
<EncoderOutputFileFormat name="mp4" />
<!--
If a codec is not enabled, it is invisible to the applications
In other words, the applications won't be able to use the codec
or query the capabilities of the codec at all if it is disabled
-->
<VideoEncoderCap name="h264" enabled="true"
minBitRate="64000" maxBitRate="60000000"
minFrameWidth="176" maxFrameWidth="3840"
minFrameHeight="144" maxFrameHeight="2160"
minFrameRate="15" maxFrameRate="60" />
<VideoEncoderCap name="h263" enabled="true"
minBitRate="64000" maxBitRate="2000000"
minFrameWidth="176" maxFrameWidth="720"
minFrameHeight="144" maxFrameHeight="480"
minFrameRate="15" maxFrameRate="30" />
<VideoEncoderCap name="m4v" enabled="true"
minBitRate="64000" maxBitRate="20000000"
minFrameWidth="176" maxFrameWidth="1920"
minFrameHeight="144" maxFrameHeight="1080"
minFrameRate="15" maxFrameRate="30" />
<AudioEncoderCap name="aac" enabled="true"
minBitRate="8000" maxBitRate="156000"
minSampleRate="8000" maxSampleRate="48000"
minChannels="1" maxChannels="2" />
<AudioEncoderCap name="heaac" enabled="true"
minBitRate="8000" maxBitRate="128000"
minSampleRate="16000" maxSampleRate="48000"
minChannels="1" maxChannels="2" />
<AudioEncoderCap name="aaceld" enabled="true"
minBitRate="16000" maxBitRate="384000"
minSampleRate="16000" maxSampleRate="48000"
minChannels="1" maxChannels="2" />
<AudioEncoderCap name="amrwb" enabled="true"
minBitRate="6600" maxBitRate="23850"
minSampleRate="16000" maxSampleRate="16000"
minChannels="1" maxChannels="1" />
<AudioEncoderCap name="amrnb" enabled="true"
minBitRate="5525" maxBitRate="12200"
minSampleRate="8000" maxSampleRate="8000"
minChannels="1" maxChannels="1" />
<!--
FIXME:
We do not check decoder capabilities at present
At present, we only check whether windows media is visible
for TEST applications. For other applications, we do
not perform any checks at all.
-->
<!-- IKVPREL2KK-2424 Disable WMV and WMA support -->
<VideoDecoderCap name="wmv" enabled="false"/>
<AudioDecoderCap name="wma" enabled="false"/>
</MediaSettings>

34
configs/qdcm_calib_data_mipi_mot_cmd_smd_1080p_549.xml Normal file
View File

File diff suppressed because one or more lines are too long

321
configs/sec_config Normal file
View File

@@ -0,0 +1,321 @@
/* IPC Security Config */
/* <GPS QMI Service ID - 16>:<GPS QMI Instance ID - all instances>:<Client Group ID> */
16:4294967295:1000:1021
/* <LOWI QMI Service ID - 38>:<LOWI QMI Instance ID - all instances>:<Client Group ID> */
56:4294967295:1021
/* Allow SS CTL service to be used by system and net_raw processes */
43:4294967295:1000:3004
/* <UIMHTTP QMI Service ID - 16>:<UIMHTTP QMI Instance ID - all instances>:<Client Group ID> */
71:4294967295:1001
/* <UIMRMT QMI Service ID - 16>:<UIMRMT QMI Instance ID - all instances>:<Client Group ID> */
50:4294967295:1001
/* QMI-SLIM service permitted to gps and net_raw */
55:4294967295:1021
/* Allow Sensor services to be used by sensor process */
256:4294967295:1000:1006:1013:1021:1047:3011
257:4294967295:1000:1006:1013:1021:1047:3011
258:4294967295:1000:1006:1013:1021:1047:3011
259:4294967295:1000:1006:1013:1021:1047:3011
260:4294967295:1000:1006:1013:1021:1047:3011
261:4294967295:1000:1006:1013:1021:1047:3011
262:4294967295:1000:1006:1013:1021:1047:3011
263:4294967295:1000:1006:1013:1021:1047:3011
264:4294967295:1000:1006:1013:1021:1047:3011
265:4294967295:1000:1006:1013:1021:1047:3011
266:4294967295:1000:1006:1013:1021:1047:3011
267:4294967295:1000:1006:1013:1021:1047:3011
268:4294967295:1000:1006:1013:1021:1047:3011
269:4294967295:1000:1006:1013:1021:1047:3011
270:4294967295:1000:1006:1013:1021:1047:3011
271:4294967295:1000:1006:1013:1021:1047:3011
272:4294967295:1000:1006:1013:1021:1047:3011
273:4294967295:1000:1006:1013:1021:1047:3011
274:4294967295:1000:1006:1013:1021:1047:3011
275:4294967295:1000:1006:1013:1021:1047:3011
276:4294967295:1000:1006:1013:1021:1047:3011
277:4294967295:1000:1006:1013:1021:1047:3011
278:4294967295:1000:1006:1013:1021:1047:3011
279:4294967295:1000:1006:1013:1021:1047:3011
280:4294967295:1000:1006:1013:1021:1047:3011
281:4294967295:1000:1006:1013:1021:1047:3011
282:4294967295:1000:1006:1013:1021:1047:3011
283:4294967295:1000:1006:1013:1021:1047:3011
284:4294967295:1000:1006:1013:1021:1047:3011
285:4294967295:1000:1006:1013:1021:1047:3011
286:4294967295:1000:1006:1013:1021:1047:3011
287:4294967295:1000:1006:1013:1021:1047:3011
288:4294967295:1000:1006:1013:1021:1047:3011
289:4294967295:1000:1006:1013:1021:1047:3011
290:4294967295:1000:1006:1013:1021:1047:3011
291:4294967295:1000:1006:1013:1021:1047:3011
292:4294967295:1000:1006:1013:1021:1047:3011
293:4294967295:1000:1006:1013:1021:1047:3011
294:4294967295:1000:1006:1013:1021:1047:3011
295:4294967295:1000:1006:1013:1021:1047:3011
296:4294967295:1000:1006:1013:1021:1047:3011
297:4294967295:1000:1006:1013:1021:1047:3011
298:4294967295:1000:1006:1013:1021:1047:3011
299:4294967295:1000:1006:1013:1021:1047:3011
300:4294967295:1000:1006:1013:1021:1047:3011
301:4294967295:1000:1006:1013:1021:1047:3011
302:4294967295:1000:1006:1013:1021:1047:3011
303:4294967295:1000:1006:1013:1021:1047:3011
304:4294967295:1000:1006:1013:1021:1047:3011
305:4294967295:1000:1006:1013:1021:1047:3011
306:4294967295:1000:1006:1013:1021:1047:3011
307:4294967295:1000:1006:1013:1021:1047:3011
308:4294967295:1000:1006:1013:1021:1047:3011
309:4294967295:1000:1006:1013:1021:1047:3011
310:4294967295:1000:1006:1013:1021:1047:3011
311:4294967295:1000:1006:1013:1021:1047:3011
312:4294967295:1000:1006:1013:1021:1047:3011
313:4294967295:1000:1006:1013:1021:1047:3011
314:4294967295:1000:1006:1013:1021:1047:3011
315:4294967295:1000:1006:1013:1021:1047:3011
316:4294967295:1000:1006:1013:1021:1047:3011
317:4294967295:1000:1006:1013:1021:1047:3011
318:4294967295:1000:1006:1013:1021:1047:3011
319:4294967295:1000:1006:1013:1021:1047:3011
320:4294967295:1000:1006:1013:1021:1047:3011
321:4294967295:1000:1006:1013:1021:1047:3011
322:4294967295:1000:1006:1013:1021:1047:3011
323:4294967295:1000:1006:1013:1021:1047:3011
324:4294967295:1000:1006:1013:1021:1047:3011
325:4294967295:1000:1006:1013:1021:1047:3011
326:4294967295:1000:1006:1013:1021:1047:3011
327:4294967295:1000:1006:1013:1021:1047:3011
328:4294967295:1000:1006:1013:1021:1047:3011
329:4294967295:1000:1006:1013:1021:1047:3011
330:4294967295:1000:1006:1013:1021:1047:3011
331:4294967295:1000:1006:1013:1021:1047:3011
332:4294967295:1000:1006:1013:1021:1047:3011
333:4294967295:1000:1006:1013:1021:1047:3011
334:4294967295:1000:1006:1013:1021:1047:3011
335:4294967295:1000:1006:1013:1021:1047:3011
336:4294967295:1000:1006:1013:1021:1047:3011
337:4294967295:1000:1006:1013:1021:1047:3011
338:4294967295:1000:1006:1013:1021:1047:3011
339:4294967295:1000:1006:1013:1021:1047:3011
340:4294967295:1000:1006:1013:1021:1047:3011
341:4294967295:1000:1006:1013:1021:1047:3011
342:4294967295:1000:1006:1013:1021:1047:3011
343:4294967295:1000:1006:1013:1021:1047:3011
344:4294967295:1000:1006:1013:1021:1047:3011
345:4294967295:1000:1006:1013:1021:1047:3011
346:4294967295:1000:1006:1013:1021:1047:3011
347:4294967295:1000:1006:1013:1021:1047:3011
348:4294967295:1000:1006:1013:1021:1047:3011
349:4294967295:1000:1006:1013:1021:1047:3011
350:4294967295:1000:1006:1013:1021:1047:3011
351:4294967295:1000:1006:1013:1021:1047:3011
352:4294967295:1000:1006:1013:1021:1047:3011
353:4294967295:1000:1006:1013:1021:1047:3011
354:4294967295:1000:1006:1013:1021:1047:3011
355:4294967295:1000:1006:1013:1021:1047:3011
356:4294967295:1000:1006:1013:1021:1047:3011
357:4294967295:1000:1006:1013:1021:1047:3011
358:4294967295:1000:1006:1013:1021:1047:3011
359:4294967295:1000:1006:1013:1021:1047:3011
360:4294967295:1000:1006:1013:1021:1047:3011
361:4294967295:1000:1006:1013:1021:1047:3011
362:4294967295:1000:1006:1013:1021:1047:3011
363:4294967295:1000:1006:1013:1021:1047:3011
364:4294967295:1000:1006:1013:1021:1047:3011
365:4294967295:1000:1006:1013:1021:1047:3011
366:4294967295:1000:1006:1013:1021:1047:3011
367:4294967295:1000:1006:1013:1021:1047:3011
368:4294967295:1000:1006:1013:1021:1047:3011
369:4294967295:1000:1006:1013:1021:1047:3011
370:4294967295:1000:1006:1013:1021:1047:3011
371:4294967295:1000:1006:1013:1021:1047:3011
372:4294967295:1000:1006:1013:1021:1047:3011
373:4294967295:1000:1006:1013:1021:1047:3011
374:4294967295:1000:1006:1013:1021:1047:3011
375:4294967295:1000:1006:1013:1021:1047:3011
376:4294967295:1000:1006:1013:1021:1047:3011
377:4294967295:1000:1006:1013:1021:1047:3011
378:4294967295:1000:1006:1013:1021:1047:3011
379:4294967295:1000:1006:1013:1021:1047:3011
380:4294967295:1000:1006:1013:1021:1047:3011
381:4294967295:1000:1006:1013:1021:1047:3011
382:4294967295:1000:1006:1013:1021:1047:3011
383:4294967295:1000:1006:1013:1021:1047:3011
384:4294967295:1000:1006:1013:1021:1047:3011
385:4294967295:1000:1006:1013:1021:1047:3011
386:4294967295:1000:1006:1013:1021:1047:3011
387:4294967295:1000:1006:1013:1021:1047:3011
388:4294967295:1000:1006:1013:1021:1047:3011
389:4294967295:1000:1006:1013:1021:1047:3011
390:4294967295:1000:1006:1013:1021:1047:3011
391:4294967295:1000:1006:1013:1021:1047:3011
392:4294967295:1000:1006:1013:1021:1047:3011
393:4294967295:1000:1006:1013:1021:1047:3011
394:4294967295:1000:1006:1013:1021:1047:3011
395:4294967295:1000:1006:1013:1021:1047:3011
396:4294967295:1000:1006:1013:1021:1047:3011
397:4294967295:1000:1006:1013:1021:1047:3011
398:4294967295:1000:1006:1013:1021:1047:3011
399:4294967295:1000:1006:1013:1021:1047:3011
400:4294967295:1000:1006:1013:1021:1047:3011
401:4294967295:1000:1006:1013:1021:1047:3011
402:4294967295:1000:1006:1013:1021:1047:3011
403:4294967295:1000:1006:1013:1021:1047:3011
404:4294967295:1000:1006:1013:1021:1047:3011
405:4294967295:1000:1006:1013:1021:1047:3011
406:4294967295:1000:1006:1013:1021:1047:3011
407:4294967295:1000:1006:1013:1021:1047:3011
408:4294967295:1000:1006:1013:1021:1047:3011
409:4294967295:1000:1006:1013:1021:1047:3011
410:4294967295:1000:1006:1013:1021:1047:3011
411:4294967295:1000:1006:1013:1021:1047:3011
412:4294967295:1000:1006:1013:1021:1047:3011
413:4294967295:1000:1006:1013:1021:1047:3011
414:4294967295:1000:1006:1013:1021:1047:3011
415:4294967295:1000:1006:1013:1021:1047:3011
416:4294967295:1000:1006:1013:1021:1047:3011
417:4294967295:1000:1006:1013:1021:1047:3011
418:4294967295:1000:1006:1013:1021:1047:3011
419:4294967295:1000:1006:1013:1021:1047:3011
420:4294967295:1000:1006:1013:1021:1047:3011
421:4294967295:1000:1006:1013:1021:1047:3011
422:4294967295:1000:1006:1013:1021:1047:3011
423:4294967295:1000:1006:1013:1021:1047:3011
424:4294967295:1000:1006:1013:1021:1047:3011
425:4294967295:1000:1006:1013:1021:1047:3011
426:4294967295:1000:1006:1013:1021:1047:3011
427:4294967295:1000:1006:1013:1021:1047:3011
428:4294967295:1000:1006:1013:1021:1047:3011
429:4294967295:1000:1006:1013:1021:1047:3011
430:4294967295:1000:1006:1013:1021:1047:3011
431:4294967295:1000:1006:1013:1021:1047:3011
432:4294967295:1000:1006:1013:1021:1047:3011
433:4294967295:1000:1006:1013:1021:1047:3011
434:4294967295:1000:1006:1013:1021:1047:3011
435:4294967295:1000:1006:1013:1021:1047:3011
436:4294967295:1000:1006:1013:1021:1047:3011
437:4294967295:1000:1006:1013:1021:1047:3011
438:4294967295:1000:1006:1013:1021:1047:3011
439:4294967295:1000:1006:1013:1021:1047:3011
440:4294967295:1000:1006:1013:1021:1047:3011
441:4294967295:1000:1006:1013:1021:1047:3011
442:4294967295:1000:1006:1013:1021:1047:3011
443:4294967295:1000:1006:1013:1021:1047:3011
444:4294967295:1000:1006:1013:1021:1047:3011
445:4294967295:1000:1006:1013:1021:1047:3011
446:4294967295:1000:1006:1013:1021:1047:3011
447:4294967295:1000:1006:1013:1021:1047:3011
448:4294967295:1000:1006:1013:1021:1047:3011
449:4294967295:1000:1006:1013:1021:1047:3011
450:4294967295:1000:1006:1013:1021:1047:3011
451:4294967295:1000:1006:1013:1021:1047:3011
452:4294967295:1000:1006:1013:1021:1047:3011
453:4294967295:1000:1006:1013:1021:1047:3011
454:4294967295:1000:1006:1013:1021:1047:3011
455:4294967295:1000:1006:1013:1021:1047:3011
456:4294967295:1000:1006:1013:1021:1047:3011
457:4294967295:1000:1006:1013:1021:1047:3011
458:4294967295:1000:1006:1013:1021:1047:3011
459:4294967295:1000:1006:1013:1021:1047:3011
460:4294967295:1000:1006:1013:1021:1047:3011
461:4294967295:1000:1006:1013:1021:1047:3011
462:4294967295:1000:1006:1013:1021:1047:3011
463:4294967295:1000:1006:1013:1021:1047:3011
464:4294967295:1000:1006:1013:1021:1047:3011
465:4294967295:1000:1006:1013:1021:1047:3011
466:4294967295:1000:1006:1013:1021:1047:3011
467:4294967295:1000:1006:1013:1021:1047:3011
468:4294967295:1000:1006:1013:1021:1047:3011
469:4294967295:1000:1006:1013:1021:1047:3011
470:4294967295:1000:1006:1013:1021:1047:3011
471:4294967295:1000:1006:1013:1021:1047:3011
472:4294967295:1000:1006:1013:1021:1047:3011
473:4294967295:1000:1006:1013:1021:1047:3011
474:4294967295:1000:1006:1013:1021:1047:3011
475:4294967295:1000:1006:1013:1021:1047:3011
476:4294967295:1000:1006:1013:1021:1047:3011
477:4294967295:1000:1006:1013:1021:1047:3011
478:4294967295:1000:1006:1013:1021:1047:3011
479:4294967295:1000:1006:1013:1021:1047:3011
480:4294967295:1000:1006:1013:1021:1047:3011
481:4294967295:1000:1006:1013:1021:1047:3011
482:4294967295:1000:1006:1013:1021:1047:3011
483:4294967295:1000:1006:1013:1021:1047:3011
484:4294967295:1000:1006:1013:1021:1047:3011
485:4294967295:1000:1006:1013:1021:1047:3011
486:4294967295:1000:1006:1013:1021:1047:3011
487:4294967295:1000:1006:1013:1021:1047:3011
488:4294967295:1000:1006:1013:1021:1047:3011
489:4294967295:1000:1006:1013:1021:1047:3011
490:4294967295:1000:1006:1013:1021:1047:3011
491:4294967295:1000:1006:1013:1021:1047:3011
492:4294967295:1000:1006:1013:1021:1047:3011
493:4294967295:1000:1006:1013:1021:1047:3011
494:4294967295:1000:1006:1013:1021:1047:3011
495:4294967295:1000:1006:1013:1021:1047:3011
496:4294967295:1000:1006:1013:1021:1047:3011
497:4294967295:1000:1006:1013:1021:1047:3011
498:4294967295:1000:1006:1013:1021:1047:3011
499:4294967295:1000:1006:1013:1021:1047:3011
500:4294967295:1000:1006:1013:1021:1047:3011
501:4294967295:1000:1006:1013:1021:1047:3011
502:4294967295:1000:1006:1013:1021:1047:3011
503:4294967295:1000:1006:1013:1021:1047:3011
504:4294967295:1000:1006:1013:1021:1047:3011
505:4294967295:1000:1006:1013:1021:1047:3011
506:4294967295:1000:1006:1013:1021:1047:3011
507:4294967295:1000:1006:1013:1021:1047:3011
508:4294967295:1000:1006:1013:1021:1047:3011
509:4294967295:1000:1006:1013:1021:1047:3011
510:4294967295:1000:1006:1013:1021:1047:3011
511:4294967295:1000:1006:1013:1021:1047:3011
/* Allow RCS service to aquire net_raw permission */
18:4294967295:1001:3004
/* Allow QMID service to aquire net_raw permission */
3:4294967295:1001:3004
2:4294967295:1001:3004
42:4294967295:1001:3004
18:4294967295:1001:3004
9:4294967295:1001:3004
1:4294967295:1001:3004:1000
4:4294967295:1001:3004
7:4294967295:1001:3004
8:4294967295:1001:3004:1000
68:4294967295:1001:3004
/* DPM */
47:4294967295:1001:3004
/* Allow communication to some QMI services with radio privilages */
/* Format is <Service id>:<all instances>:<radio> */
/* PBM */
12:4294967295:1001
/* WMS */
5:4294967295:1001
/* IMS VT */
32:4294967295:1001
/* IMSP */
31:4294967295:1001
/* PDC */
36:4294967295:1001
/* SAR */
17:4294967295:1001
/* RFRPE */
41:4294967295:1001
/*UIM*/
11:4294967295:1001
/*CAT*/
10:4294967295:1001
/*IMSA*/
33:4294967295:1001
/* CSVT */
29:4294967295:1001
/*LTE*/
70:4294967295:1001
/* Allow Data dpmd to access QMI DFS */
48:4294967295:1000:3004
/* DIAG */
4097:4294967295:2002:2950:3009
/* <WLFW QMI Service ID - 0x45>:<WLFW QMI Instance ID - all instances>:<Client Group ID> */
69:4294967295:1000
/* <WLPS QMI Service ID - 0x39>:<WLFW QMI Instance ID - all instances>:<Client Group ID> */
57:4294967295:1000
/* MOTEXT */
228:4294967295:1001:3004

110
configs/thermal-engine-potter.conf Normal file
View File

@@ -0,0 +1,110 @@
[FRONT_TEMP]
algo_type virtual
trip_sensor msm_therm
set_point -18000
set_point_clr -20000
sensors msm_therm pa_therm0 chg_therm batt_temp
weights 110 100 85 110
offsets -2000 -2000 -2000 -2000
sampling 10000
math 0
sys_temp
[REPORT-FRONT-TEMP]
algo_type monitor
sampling 300000
sensor FRONT_TEMP
thresholds 45000
thresholds_clr 43000
actions report
action_info 1
[BACK_TEMP]
algo_type virtual
trip_sensor msm_therm
set_point -18000
set_point_clr -20000
sensors msm_therm pa_therm0 chg_therm batt_temp
weights 110 100 85 110
offsets -1000 -1000 -1000 -1000
sampling 10000
math 0
sys_temp
[REPORT-BACK-TEMP]
algo_type monitor
sampling 300000
sensor BACK_TEMP
thresholds 45000
thresholds_clr 43000
actions report
action_info 1
[SS-BATT-BATT]
algo_type ss
sampling 5000
sensor batt_therm
device battery
set_point 44000
set_point_clr 42000
[SS-CHG-BATT]
algo_type ss
sampling 5000
sensor chg_therm
device battery
set_point 43000
set_point_clr 41000
[SS-MSM-CLUSTER0]
algo_type ss
sampling 1000
sensor msm_therm
device cluster0
set_point 49000
set_point_clr 44000
device_max_limit 1401600
[VIRTUAL-CPUS]
algo_type virtual
trip_sensor tsens_tz_sensor9
set_point 75000
set_point_clr 65000
sensors tsens_tz_sensor9 tsens_tz_sensor10 tsens_tz_sensor11 tsens_tz_sensor12 tsens_tz_sensor13 tsens_tz_sensor4 tsens_tz_sensor5 tsens_tz_sensor6 tsens_tz_sensor7 tsens_tz_sensor8
sampling 50
math 2
[SS-GPU]
algo_type ss
sampling 250
sensor gpu
device gpu
set_point 95000
set_point_clr 65000
[SS-POPMEM]
algo_type ss
disable
sampling 250
sensor pop_mem
device cluster0
set_point 70000
set_point_clr 55000
time_constant 2
[SS-CPUS-ALL]
algo_type ss
sampling 50
sensor VIRTUAL-CPUS
device cluster0
set_point 95000
set_point_clr 55000
[MONITOR-CAMERA-MSM]
algo_type monitor
sampling 1000
sensor msm_therm
thresholds 52000 56000
thresholds_clr 47000 53000
actions camera camera
action_info 1 2