avicii: Update blobs from CAF
* VENDOR from LA.UM.9.12.r1-14400-SMxx50.QSSI13.0 * QSSI from LA.QSSI.13.0.r1-09000-qssi.0 * Split CAF proprietary files * Update Keymaster to 4.1 * Use FBE v2 * Use Non 20801/20804 (Nord) libs/firmwares * Do not use odm/vendor dir for WCNSS_qcom_cfg.ini
This commit is contained in:
KakatkarAkshay
775
proprietary/odm/vendor/etc/wifi/WCNSS_qcom_cfg.ini
vendored
775
proprietary/odm/vendor/etc/wifi/WCNSS_qcom_cfg.ini
vendored
@@ -1,775 +0,0 @@
|
||||
#OplusVersion=2022030413
|
||||
# This file allows user to override the factory
|
||||
# defaults for the WLAN Driver
|
||||
|
||||
# Enable IMPS or not
|
||||
gEnableImps=1
|
||||
|
||||
# Enable BMPS or not
|
||||
gEnableBmps=1
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only.
|
||||
gDot11Mode=0
|
||||
|
||||
# Assigned MAC Addresses - This will be used until NV items are in place
|
||||
# Each byte of MAC address is represented in Hex format as XX
|
||||
Intf0MacAddress=000AF58989FF
|
||||
Intf1MacAddress=000AF58989FE
|
||||
Intf2MacAddress=000AF58989FD
|
||||
Intf3MacAddress=000AF58989FC
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
InfraUapsdBeSrvIntv=0
|
||||
InfraUapsdBkSrvIntv=0
|
||||
|
||||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
# Flags to filter Mcast and Bcast RX packets.
|
||||
# Value 0: No filtering, 1: Filter all Multicast.
|
||||
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
|
||||
McastBcastFilter=3
|
||||
|
||||
#Flag to enable HostARPOffload feature or not
|
||||
hostArpOffload=1
|
||||
|
||||
#Flag to enable HostNSOffload feature or not
|
||||
hostNSOffload=1
|
||||
|
||||
# 802.11n Protection flag
|
||||
gEnableApProt=1
|
||||
|
||||
#Enable OBSS protection
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#Qiulei@CONNECTIVITY.WiFi.Power.1116749,2017/09/22
|
||||
#Modify for wifi softap standby current
|
||||
#gEnableApOBSSProt=1
|
||||
#else /* OPLUS_BUG_STABILITY */
|
||||
gEnableApOBSSProt=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Min.Yi@CONNECTIVITY.WiFi.Hardware.Power.1323750, 2018/03/21
|
||||
#Add for high current when download on 11B
|
||||
#g11bNumTxChains=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Guotian.Wu@CONNECTIVITY.WiFi.Hardware.OpCustomized.1123073, 2019/07/02
|
||||
#disable for CTS test fail
|
||||
gEnableRTTSupport=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#Enable/Disable UAPSD for SoftAP
|
||||
gEnableApUapsd=1
|
||||
|
||||
# Fixed Rate
|
||||
gFixedRate=0
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
# Fragmentation Threshold
|
||||
# gFragmentationThreshold=2346
|
||||
|
||||
# RTS threshold
|
||||
RTSThreshold=1048576
|
||||
|
||||
# Intra-BSS forward
|
||||
gDisableIntraBssFwd=0
|
||||
|
||||
# WMM Enable/Disable
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
g11dSupportEnabled=0
|
||||
|
||||
# 802.11h support
|
||||
g11hSupportEnabled=1
|
||||
|
||||
# DFS Master Capability
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#WuGuotian@CONNECTIVITY.WIFI.BASE.OPERATOR.2062392, 2019/5/23,
|
||||
#change for SoftAP P2P-GO cannot operate on DFS channel
|
||||
#gEnableDFSMasterCap=1
|
||||
#else /* OPLUS_BUG_STABILITY */
|
||||
gEnableDFSMasterCap=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#WuGuotian@CONNECTIVITY.WIFI.BASE.OPERATOR.2062392, 2019/05/31,
|
||||
#fix EU JP band1 band4 issue
|
||||
etsi13_srd_chan_in_master_mode=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
# ESE Support and fast transition
|
||||
EseEnabled=0
|
||||
|
||||
ImplicitQosIsEnabled=0
|
||||
|
||||
gNeighborScanTimerPeriod=200
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Botao.Cu@CONNECTIVITY.WiFi.Connect.select.1064666, 2017/01/04,
|
||||
#add for select 5G wifi preferentially
|
||||
#gNeighborLookupThreshold=76
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
gNeighborScanChannelMinTime=20
|
||||
gNeighborScanChannelMaxTime=30
|
||||
gMaxNeighborReqTries=3
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
# To disable, set FastRoamEnabled=0
|
||||
FastRoamEnabled=1
|
||||
|
||||
# Check if the AP to which we are roaming is better than current AP in
|
||||
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
|
||||
# use this value as to how better the RSSI of the new/roamable AP should
|
||||
# be for roaming
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#Botao.Cu@CONNECTIVITY.WiFi.Connect.roaming.1065694, 2016/07/06
|
||||
#modify for [C18]: modify the roaming value.
|
||||
#RoamRssiDiff=5
|
||||
#else OPLUS_BUG_STABILITY
|
||||
RoamRssiDiff=8
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#LuoChuang@CONNECTIVITY.WIFI.CONNECTION.CONNECT.579908, 2020/12/01
|
||||
#Disable HIRSSI roaming
|
||||
gRoamScanHiRssiDelta=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Botao.Cu@CONNECTIVITY.WiFi.Connect.select.1064666, 2017/01/04,
|
||||
#add for select 5G wifi preferentially
|
||||
gRoamPrefer5GHz=1
|
||||
gSelect5GHzMargin=5
|
||||
|
||||
#set roam_bad_rssi_thresh_offset_2g = 0, avoid background roaming roam from 2g to 5g
|
||||
# RSSI threshold offset for 2G to 5G roam
|
||||
roam_bad_rssi_thresh_offset_2g=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Add for dense roam
|
||||
gtraffic_threshold=55
|
||||
groam_dense_rssi_thresh_offset=0
|
||||
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#LiJunlong@CONNECTIVITY.WIFI.NETWORK.295941.2020/09/01,Modify for ini file update
|
||||
#gNeighborLookupThreshold=80
|
||||
#else /* OPLUS_BUG_STABILITY */
|
||||
gNeighborLookupThreshold=78
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#LiJunlong@CONNECTIVITY.WIFI.NETWORK.295941.2020/09/01,Add for ini file update
|
||||
global_adapt_dwelltime_mode = 1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifndef OPLUS_BUG_COMPATIBILITY
|
||||
#FanBingqi@CONNECTIVITY.WIFI.CONNECTION.4506, 2020/08/12,
|
||||
#Add for Qpower parameter,0=disable,1=enable
|
||||
gOptimizedPowerManagement=1
|
||||
#endif /* OPLUS_BUG_COMPATIBILITY */
|
||||
|
||||
#add for roam scan diff
|
||||
gRoamRescanRssiDiff=3
|
||||
#add for disable background scan roam
|
||||
roam_bg_scan_client_bitmap=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
# To enable, set gRoamIntraBand=1 (Roaming within band)
|
||||
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
||||
gRoamIntraBand=0
|
||||
|
||||
#Short Guard Interval Enable/disable
|
||||
gShortGI20Mhz=1
|
||||
gShortGI40Mhz=1
|
||||
|
||||
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
|
||||
gAPAutoShutOff=0
|
||||
|
||||
#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
|
||||
gWlanAutoShutdown = 0
|
||||
|
||||
# Not used.
|
||||
gApAutoChannelSelection=0
|
||||
|
||||
#Preferred band (both or 2.4 only or 5 only)
|
||||
BandCapability=0
|
||||
|
||||
#Channel Bonding
|
||||
gChannelBondingMode5GHz=1
|
||||
|
||||
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
||||
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
||||
#is idle for last 10 seconds.) For both active and power save clients.
|
||||
|
||||
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
||||
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
||||
|
||||
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
||||
#success still we try on 11th second if not tries on 12th and so on till 15th
|
||||
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
||||
#case DUT will detect client got removed in (10+5) seconds.
|
||||
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
||||
|
||||
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
||||
#it is period where we send NULL frame.
|
||||
#gApLinkMonitorPeriod = 10
|
||||
#gGoLinkMonitorPeriod = 10
|
||||
|
||||
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#are succeed to send or not. Hence total effective detection time is
|
||||
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
|
||||
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
gGoKeepAlivePeriod = 20
|
||||
gApKeepAlivePeriod = 20
|
||||
|
||||
#If set will start with active scan after driver load, otherwise will start with
|
||||
#passive scan to find out the domain
|
||||
gEnableBypass11d=1
|
||||
|
||||
#If set to 0, will not scan DFS channels
|
||||
gEnableDFSChnlScan=1
|
||||
|
||||
# Enable DFS channel roam
|
||||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
||||
gAllowDFSChannelRoam=1
|
||||
|
||||
gVhtChannelWidth=2
|
||||
|
||||
#Data Inactivity Timeout when in powersave (in ms)
|
||||
gDataInactivityTimeout=200
|
||||
|
||||
# Set txchainmask and rxchainmask
|
||||
# These parameters are used only if gEnable2x2 is 0
|
||||
# Valid values are 1,2
|
||||
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
||||
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
||||
gSetTxChainmask1x1=1
|
||||
gSetRxChainmask1x1=1
|
||||
|
||||
# Scan Timing Parameters
|
||||
# gPassiveMaxChannelTime=110
|
||||
# gPassiveMinChannelTime=60
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Botao.Cu@CONNECTIVITY.WiFi.Connect.Scan.958144, 2017/04/20,
|
||||
#Modify for enlarge scan result
|
||||
#gActiveMaxChannelTime=40
|
||||
#gActiveMinChannelTime=20
|
||||
#else
|
||||
gActiveMaxChannelTime=60
|
||||
gActiveMinChannelTime=40
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#If set to 0, MCC is not allowed.
|
||||
gEnableMCCMode=1
|
||||
|
||||
# MCC to SCC Switch mode:
|
||||
# 0-Disable
|
||||
# 1-Enable
|
||||
# 2-Force SCC if same band, with SAP restart
|
||||
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
||||
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
||||
# without SAP restart by sending (E)CSA
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#JiaoBo@CONNECTIVITY.WIFI.BASIC.SOFTAP.2138454, 2019/07/04,
|
||||
#remove for: support mcc mode in scene opening 2.4g hotspot when wifi connect to 5g.
|
||||
#gWlanMccToSccSwitchMode = 3
|
||||
#else
|
||||
gWlanMccToSccSwitchMode = 6
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
# 1=enable STBC; 0=disable STBC
|
||||
gEnableRXSTBC=1
|
||||
|
||||
# 1=enable tx STBC; 0=disable
|
||||
gEnableTXSTBC=1
|
||||
|
||||
# 1=enable rx LDPC; 0=disable
|
||||
gEnableRXLDPC=1
|
||||
|
||||
#Enable/Disable Tx beamforming
|
||||
gTxBFEnable=1
|
||||
|
||||
#Enable/Disable Tx beamformee in SAP mode
|
||||
gEnableTxBFeeSAP=1
|
||||
|
||||
# Enable Tx beamforming in VHT20MHz
|
||||
# Valid values are 0,1. If commented out, the default value is 0.
|
||||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support.
|
||||
gEnableTxSUBeamformer=1
|
||||
|
||||
gEnableFastRoamInConcurrency=1
|
||||
|
||||
#Maxium Channel time in msec
|
||||
gMaxMediumTime = 6000
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
#Enable Power Save offload
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#Wei.Wang@CONNECTIVITY.WiFi.Network.quality.1170942, 2017/12/04,
|
||||
#disable qpower,to decrease ping delay and improve download speed
|
||||
#gEnablePowerSaveOffload=2
|
||||
#else /* OPLUS_BUG_STABILITY */
|
||||
gEnablePowerSaveOffload=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#Enable firmware uart print
|
||||
gEnablefwprint=0
|
||||
|
||||
# Firmware log mode
|
||||
# Valid values are 0,1,2
|
||||
# 0=Disable, 1=WMI, 2=DIAG
|
||||
gEnablefwlog=1
|
||||
|
||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
||||
gVhtAmpduLenExponent=7
|
||||
|
||||
# Maximum MPDU length (VHT only. Valid values:
|
||||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
# Maximum number of wow filters required
|
||||
#gMaxWoWFilters=22
|
||||
|
||||
# WOW Enable/Disable.
|
||||
# 0 - Disable both magic pattern match and pattern byte match.
|
||||
# 1 - Enable magic pattern match on all interfaces.
|
||||
# 2 - Enable pattern byte match on all interfaces.
|
||||
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
|
||||
# Default value of gEnableWoW is 3.
|
||||
# gEnableWoW=0
|
||||
|
||||
# Enable or Disable MCC Adaptive Scheduler at the FW
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMCCAdaptiveScheduler=1
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=0
|
||||
|
||||
# Remove Overlap channel restriction
|
||||
gEnableOverLapCh=0
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
gEnableVhtFor24GHzBand=1
|
||||
|
||||
#Maximum number of offload peers supported
|
||||
# gMaxOffloadPeers=2
|
||||
|
||||
# controlling the following offload patterns
|
||||
# through ini parameter. Default value is 1
|
||||
# to disable set it to zero. ssdp = 0
|
||||
# Setup multicast pattern for mDNS 224.0.0.251,
|
||||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
||||
ssdp=0
|
||||
|
||||
#Enable Memory Deep Sleep
|
||||
gEnableMemDeepSleep=1
|
||||
|
||||
# Regulatory Setting; 0=STRICT; 1=CUSTOM
|
||||
gRegulatoryChangeCountry=1
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
# gRAFilterEnable=0
|
||||
gRArateLimitInterval=600
|
||||
|
||||
# Maximum number of concurrent connections
|
||||
gMaxConcurrentActiveSessions=3
|
||||
|
||||
# Disable/Enable GreenAP
|
||||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=0
|
||||
|
||||
# Radar PRI multiplier
|
||||
gDFSradarMappingPriMultiplier=4
|
||||
|
||||
gPNOScanSupport=1
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
# 0 to disable, 1 to enable
|
||||
gEnableLpassSupport=1
|
||||
|
||||
# Whether userspace country code setting shld have priority
|
||||
gCountryCodePriority=1
|
||||
|
||||
# Enable(1)/Disable(0) SIFS burst
|
||||
gEnableSifsBurst=1
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Enable/Disable channel avoidance for SAP in SCC scenario
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gSapSccChanAvoidance=0
|
||||
|
||||
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
||||
gIbssTxSpEndInactivityTime=10
|
||||
|
||||
# Enable support for TDLS
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSSupport=1
|
||||
|
||||
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
||||
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
||||
# and RSSI) is met and then will initiate teardown when teardown criteria
|
||||
# (idle packet count and RSSI) is met.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSImplicitTrigger=1
|
||||
|
||||
# Enable TDLS External Control. That is, user space application has to
|
||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
||||
# Device will establish TDLS only towards those configured peers whenever
|
||||
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
||||
# when teardown criteria (idle packet count and RSSI) is met. However,
|
||||
# device will accept TDLS connection if it is initiated from any other peer,
|
||||
# even if that peer is not configured.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# For TDLS External Control, Implicit Trigger must also be enabled.
|
||||
gTDLSExternalControl=1
|
||||
|
||||
# Enable support for TDLS off-channel operation
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# TDLS off-channel operation will be invoked when there is only one
|
||||
# TDLS connection.
|
||||
gEnableTDLSOffChannel=1
|
||||
|
||||
# Enable or Disable Random MAC (Spoofing)
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMacAddrSpoof=1
|
||||
|
||||
################ Datapath feature set Begin ################
|
||||
# Bus bandwidth threshold values in terms of number of packets
|
||||
gBusBandwidthHighThreshold=2000
|
||||
gBusBandwidthMediumThreshold=500
|
||||
gBusBandwidthLowThreshold=150
|
||||
|
||||
# Bus bandwidth compute timeout value in ms
|
||||
gBusBandwidthComputeInterval=100
|
||||
|
||||
# VHT Tx/Rx MCS values
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gVhtRxMCS=2
|
||||
gVhtTxMCS=2
|
||||
|
||||
# VHT Tx/Rx MCS values for 2x2
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gEnable2x2=1
|
||||
gVhtRxMCS2x2=2
|
||||
gVhtTxMCS2x2=2
|
||||
|
||||
#IPA config is a bit mask and following are the configurations.
|
||||
#bit0 IPA Enable
|
||||
#bit1 IPA PRE Filter enable
|
||||
#bit2 IPv6 enable
|
||||
#bit3 IPA Resource Manager (RM) enable
|
||||
#bit4 IPA Clock scaling enable
|
||||
#bit5 IPA uC ENABLE
|
||||
#bit6 IPA uC STA ENABLE
|
||||
#bit8 IPA Real Time Debugging
|
||||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
|
||||
# Enable/Disable RX full reorder offload
|
||||
gReorderOffloadSupported=1
|
||||
|
||||
# Enable CE classification
|
||||
# 1 - enable(default) 0 - disable
|
||||
gCEClassifyEnable=1
|
||||
|
||||
# Enable Rx handling options
|
||||
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
||||
rx_mode=5
|
||||
|
||||
# Enable(Tx) fastpath for data traffic.
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableFastPath=1
|
||||
|
||||
# This flag enables IP, TCP and UDP checksum offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableIpTcpUdpChecksumOffload=1
|
||||
|
||||
# Enable TCP Segmentation Offload
|
||||
# 1 - enable 0 - disable
|
||||
TSOEnable=1
|
||||
|
||||
# Enable Generic Receive Offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#Rongzheng.tang@CONNECTIVITY.WiFi.Network.1389443, 2019/05/23
|
||||
GROEnable=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
# Enable HT MPDU Density
|
||||
# 4 for 2 micro sec
|
||||
ght_mpdu_density=4
|
||||
|
||||
# Enable flow steering to enable multiple CEs for Rx flows.
|
||||
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
||||
# Parallel Rx paths.
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableFlowSteering=1
|
||||
|
||||
# Time in microseconds after which a NAPI poll must yield
|
||||
ce_service_max_yield_time=500
|
||||
|
||||
#Maximum number of HTT messages to be processed per NAPI poll
|
||||
ce_service_max_rx_ind_flush=1
|
||||
|
||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
||||
maxMSDUsPerRxInd=8
|
||||
|
||||
# Enable NUD tracking feature
|
||||
# 1 - enable 0 - disable(default)
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#Junyuan.Huang@CONNECTIVITY.WiFi.Network.internet.1405517,2018/12/22
|
||||
#Modify for disable gEnableNUDTracking in wifi driver
|
||||
#gEnableNUDTracking=1
|
||||
#else
|
||||
gEnableNUDTracking=0
|
||||
#endif /*OPLUS_BUG_STABILITY*/
|
||||
|
||||
# Enable PEER UNMAP CONF SUPPORT
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnablePeerUnmapConfSupport=1
|
||||
|
||||
################ Datapath feature set End ################
|
||||
|
||||
################ NAN feature set start ###################
|
||||
|
||||
# Enable NAN discovery (NAN 1.0)
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNanSupport=1
|
||||
# Enable NAN Datapath
|
||||
genable_nan_datapath=1
|
||||
|
||||
################ NAN feature set end #####################
|
||||
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#Shimin.Jiang@CONNECTIVITY.WiFi.Connect.Scan.1405517,2018/5/31
|
||||
#Modify for disable adaptive dwell scan mode
|
||||
#adaptive_dwell_mode_enabled=1
|
||||
#else
|
||||
adaptive_dwell_mode_enabled=0
|
||||
#endif /*OPLUS_BUG_STABILITY*/
|
||||
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
adapt_dwell_lpf_weight=80
|
||||
|
||||
adapt_dwell_wifi_act_threshold=10
|
||||
|
||||
MAWCEnabled=0
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
# Create another interface during driver load
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#JunYuan.Huang@CONNECTIVITY.WiFi.AutoConnect.1882408 2019/09/27
|
||||
#Add for dual sta can not up wlan1
|
||||
#gEnableConcurrentSTA=wlan1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Aligning with Oneplus R ini parameters
|
||||
#Sukshata@CONNECTIVITY.WIFI.HARDWARE.RSSI.2810957,2022/01/04
|
||||
gEnableSNRMonitoring=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#Jie.Huang@CONNECTIVITY.WiFi.AutoConnect.1881594 2019/03/13
|
||||
#Add for : bug 1881594 the signal of the wifi receiveing from the ap sometimes suddenly deteriorates.
|
||||
# 1- Enable DTIM Synth
|
||||
# 0- Disable DTIM Synth
|
||||
gEnableLPRx=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#genglin.lian@CONNECTIVITY.WiFi.Connect.Scan.1975483, 2019/05/01,
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
#Disallow the beacons/probe resp from adjacent channels
|
||||
allow_adj_chan_bcns=0
|
||||
|
||||
#Shimin.Jiang@CONNECTIVITY.WiFi.Connect.dhcp.1037520, 2017/07/07,
|
||||
#Add for some ap don't response to dhcp discovery paket with qos flag equals voice
|
||||
arp_ac_category=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Yadong.Hu@Connectivity.WiFi.Connect.disconnect.956254, 2017/04/20,
|
||||
#Add for set value of kick out, 2047 means if DUT missed 2047 packets from AP, then disconnect
|
||||
gDroppedPktDisconnectTh=2047
|
||||
|
||||
#Add for set value of beacon miss, 15 and 25 means 40 beacon miss,then maybe trigger disconnect
|
||||
gRoamBmissFirstBcnt=15
|
||||
gRoamBmissFinalBcnt=25
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Aligning with Oneplus R ini parameters
|
||||
#Sukshata@CONNECTIVITY.WIFI.TPUT.2896874 ,2022/01/07
|
||||
gEnableEdcaParams=0
|
||||
#endif OPLUS_BUG_STABILITY
|
||||
gEdcaVoCwmin=2
|
||||
gEdcaViCwmin=2
|
||||
gEdcaBkCwmin=2
|
||||
gEdcaBeCwmin=2
|
||||
|
||||
gEdcaVoCwmax=3
|
||||
gEdcaViCwmax=3
|
||||
gEdcaBkCwmax=3
|
||||
gEdcaBeCwmax=3
|
||||
|
||||
gEdcaVoAifs=0
|
||||
gEdcaViAifs=0
|
||||
gEdcaBkAifs=0
|
||||
gEdcaBeAifs=0
|
||||
|
||||
#TangRongzheng@CONNECTIVITY.WIFI.NETWORK.1063609, 2017/03/30, add for enable PER based roaming
|
||||
# enabled for Tx and Rx traffic
|
||||
gper_roam_enabled=3
|
||||
|
||||
# Mbps x 10
|
||||
gper_roam_high_rate_th=540
|
||||
gper_roam_low_rate_th =150
|
||||
|
||||
# high PER rate % for roaming scan triggered
|
||||
gper_roam_th_percent=80
|
||||
gper_roam_rest_time=60
|
||||
|
||||
#HuangYuan@CONNECTIVITY.WIFI.NETWORK.1064218, 2016/08/04, add for QQ message delays when DUT is asleep
|
||||
rx_wakelock_timeout=250
|
||||
|
||||
#TangRongzheng@CONNECTIVITY.WIFI.NETWORK.1031774, 2017/06/18, add for disable active mode offload.
|
||||
gActiveModeOffload=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_FEATURE_WIFI_DATASTALL
|
||||
#HuangYuan@CONNECTIVITY.WIFI.NETWORK.4494, 2017/10/30,
|
||||
#Add for data stall detection
|
||||
gEnableDataStallDetection=1
|
||||
|
||||
#Ziqiang.Yu@CONNECTIVITY.WiFi.Network.internet.1140781, 2019/08/20,
|
||||
#disable 2.4G HT40
|
||||
gChannelBondingMode24GHz =0
|
||||
#endif /* OPLUS_FEATURE_WIFI_DATASTALL */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Pan.Zhang@CONNECTIVITY.WiFi.Basic.Log.1072015, 2017/11/23,
|
||||
#Add for enable Packet Log
|
||||
gEnablePacketLog=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Yuanliu.Tang@CONNECTIVITY.WiFi.Basic.Crash.1135753, 2017/05/27
|
||||
#Add for open walkround feature to avoid MTK AP crash,QC case2952499
|
||||
gForce1x1Exception=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Qiulei@CONNECTIVITY.WiFi.Hardware.1065440, 2017/05/16
|
||||
#Add for show the max linkspeed
|
||||
gReportMaxLinkSpeed=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Qiulei@CONNECTIVITY.WiFi.Power.802254, 2016/07/20
|
||||
#Add for : reduce ap sleep current
|
||||
gApLinkMonitorPeriod = 25
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifndef OPLUS_BUG_COMPATIBILITY
|
||||
#HuiTao@CONNECTIVITY.WiFi.Basic.Custom.1067549, 2018/01/02,
|
||||
#Modify for country code JP soft ap cant got 5G list for bug:1194908
|
||||
gindoor_channel_support=1
|
||||
#endif /* OPLUS_BUG_COMPATIBILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Tao.Hui@CONNECTIVITY.WiFi.Basic.Custom.1884719 2019/03/08
|
||||
#add for bdf fw rus
|
||||
gEnableForceTargetAssert=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Yuan.Huang@CONNECTIVITY.WiFi.Network.internet.1809314, 2019/07/24,
|
||||
#Add for Dual STA connect leaky APs with 1x1
|
||||
gActionOUIConnect1x1=000C43 04 03000000 70 35 A2 000CE7 04 00000000 F0 35 A2 001018 06 0200000C0000 BC 2D 52 00E04C 03 020160 E0 35 A2
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#ShiXing.Ke@CONNECTIVITY.Wifi.Connect.auth.1058482,bug1496579 2018/07/28,
|
||||
#Modify for bssid_hint_priority default is 0 in .h file
|
||||
is_bssid_hint_priority=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#Jian.Wang@CONNECTIVITY.WiFi.Basic.Crash.1340840, 2018/05/17,
|
||||
#Add for enable Self Recovery for crash
|
||||
gEnableSelfRecovery=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
# Rx thread affinity mask in UL case
|
||||
RX_THREAD_UL_CPU_AFFINITY_MASK=0xc0
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Wei.Wang@CONNECTIVITY.WiFi.Network.internet.2796551, 2020/02/09,
|
||||
#Add for [BUGID],disble enable_disconnect_roam_offload
|
||||
enable_disconnect_roam_offload=0
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#CuBotao@CONNECTIVITY.WIFI.CONNECT,Add for,2020/11/11
|
||||
gInitialScanNoDFSChnl=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#HuChao@CONNECTIVITY.WIFI.CONNECTION.SCAN.787904,2021/01/04
|
||||
# Add for scan dev whose beacon is invalid with wrong length
|
||||
scan_allow_bss_with_corrupted_ie=1
|
||||
|
||||
# Add for scan dev whose beacon channel mismatch
|
||||
drop_bcn_on_chan_mismatch=0
|
||||
#endif /*OPLUS_BUG_STABILITY*/
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#HuChao@CONNECTIVITY.WiFi.CONNECT.scan.719365, 2020/12/18,
|
||||
enable_pending_list_req=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#ifdef OPLUS_BUG_STABILITY
|
||||
#Aligning with Oneplus R ini parameters
|
||||
#Sukshata@CONNECTIVITY.WIFI.HARDWARE.RSSI.2810957,2022/01/04
|
||||
g_disable_hw_assist=0
|
||||
gDualMacFeatureDisable=1
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
|
||||
BIN
proprietary/odm/vendor/firmware/widevine.b00
vendored
BIN
proprietary/odm/vendor/firmware/widevine.b00
vendored
Binary file not shown.
BIN
proprietary/odm/vendor/firmware/widevine.b01
vendored
BIN
proprietary/odm/vendor/firmware/widevine.b01
vendored
Binary file not shown.
BIN
proprietary/odm/vendor/firmware/widevine.b02
vendored
BIN
proprietary/odm/vendor/firmware/widevine.b02
vendored
Binary file not shown.
BIN
proprietary/odm/vendor/firmware/widevine.b03
vendored
BIN
proprietary/odm/vendor/firmware/widevine.b03
vendored
Binary file not shown.
BIN
proprietary/odm/vendor/firmware/widevine.b04
vendored
BIN
proprietary/odm/vendor/firmware/widevine.b04
vendored
Binary file not shown.
BIN
proprietary/odm/vendor/firmware/widevine.b05
vendored
BIN
proprietary/odm/vendor/firmware/widevine.b05
vendored
Binary file not shown.
BIN
proprietary/odm/vendor/firmware/widevine.b06
vendored
BIN
proprietary/odm/vendor/firmware/widevine.b06
vendored
Binary file not shown.
BIN
proprietary/odm/vendor/firmware/widevine.b07
vendored
BIN
proprietary/odm/vendor/firmware/widevine.b07
vendored
Binary file not shown.
BIN
proprietary/odm/vendor/firmware/widevine.mdt
vendored
BIN
proprietary/odm/vendor/firmware/widevine.mdt
vendored
Binary file not shown.
Reference in New Issue
Block a user