avicii: Update blobs from CAF
* VENDOR from LA.UM.9.12.r1-14400-SMxx50.QSSI13.0 * QSSI from LA.QSSI.13.0.r1-09000-qssi.0 * Split CAF proprietary files * Update Keymaster to 4.1 * Use FBE v2 * Use Non 20801/20804 (Nord) libs/firmwares * Do not use odm/vendor dir for WCNSS_qcom_cfg.ini
This commit is contained in:
KakatkarAkshay
@@ -1,281 +0,0 @@
|
||||
#########################################
|
||||
# Log verbosity control for izat modules
|
||||
#########################################
|
||||
# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
|
||||
IZAT_DEBUG_LEVEL = 2
|
||||
#ODM
|
||||
##################################################
|
||||
# Select WIFI Wait Timeout value in seconds for SUPL
|
||||
##################################################
|
||||
WIFI_WAIT_TIMEOUT_SELECT = 0
|
||||
|
||||
##################################################
|
||||
# Time interval of injecting SRN scan data to modem
|
||||
# time in seconds.
|
||||
# Note: recommended value is between 1-5 sec
|
||||
##################################################
|
||||
LPPE_SRN_DATA_SCAN_INJECT_TIME=2
|
||||
|
||||
################################
|
||||
# NLP Settings
|
||||
################################
|
||||
# NLP_MODE 1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
|
||||
# For Automotive products, please use NLP_MODE = 4 only.
|
||||
# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
|
||||
# to determine how much Tolerance for first position
|
||||
# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
|
||||
# to determine how much Tolerance for positions after first
|
||||
# NLP_THRESHOLD: Sets how many failures needed before
|
||||
# switching preferred NLP in Combo mode
|
||||
# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
|
||||
# must be, in multiples, between two NLP location reports to
|
||||
# be considered much worse accuracy. Used in switching logic
|
||||
# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
|
||||
# whether or not to still send network location requests to
|
||||
# QNP when the EULA is not consented to by the user. QNP can
|
||||
# still return ZPP locations or injected locations even
|
||||
# without EULA consent, but the uncertainty can be high.
|
||||
# QNP preferred mode prefers QNP when there is EULA consent,
|
||||
# otherwise OSNLP is used.
|
||||
NLP_MODE = 1
|
||||
NLP_MODE_EMERGENCY = 2
|
||||
NLP_TOLERANCE_TIME_FIRST = 5000
|
||||
NLP_TOLERANCE_TIME_AFTER = 20000
|
||||
NLP_THRESHOLD = 3
|
||||
NLP_ACCURACY_MULTIPLE = 2
|
||||
NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
|
||||
|
||||
#########################################
|
||||
# NLP PACKAGE SETTINGS
|
||||
#########################################
|
||||
# OSNLP_PACKAGE: name of default NLP package
|
||||
OSNLP_PACKAGE = com.google.android.gms
|
||||
# REGION_OSNLP_PACKAGE:
|
||||
# This value will be used as alternative
|
||||
# for particular region where default NLP is not functional.
|
||||
#REGION_OSNLP_PACKAGE =
|
||||
|
||||
###################################
|
||||
# GEOFENCE SERVICES
|
||||
###################################
|
||||
# If set to one of the defined values below, it will override
|
||||
# the responsiveness for geofence services, which implements
|
||||
# the Proximity Alert API. If not set to a value defined below,
|
||||
# which is default, it will not override the responsivness.
|
||||
# The geofence HAL API is unaffected by this value.
|
||||
# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
|
||||
# 1: LOW responsiveness
|
||||
# 2: MEDIUM responsiveness
|
||||
# 3: HIGH responsiveness
|
||||
GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
|
||||
|
||||
#####################################
|
||||
#GTP Opt-In app
|
||||
#####################################
|
||||
|
||||
#GTP privacy policy version url
|
||||
#https support is required
|
||||
GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html
|
||||
|
||||
#GTP privacy policy version download retry interval
|
||||
#unit is second. default is 86400
|
||||
GTP_PRIVACY_RETRY_INTERVAL = 86400
|
||||
|
||||
#####################################
|
||||
# IZAT PREMIUM FEATURE SETTINGS
|
||||
#####################################
|
||||
#Possible states of a feature:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
#PREMIUM
|
||||
|
||||
#GTP_MODE valid modes:
|
||||
# DISABLED
|
||||
# LEGACY_WWAN
|
||||
# SDK (WWAN not available for Modems before LocTech 10.0)
|
||||
GTP_MODE=DISABLED
|
||||
|
||||
#GTP_WAA valid modes:
|
||||
# DISABLED
|
||||
# BASIC
|
||||
GTP_WAA=DISABLED
|
||||
|
||||
#SAP valid modes:
|
||||
# DISABLED
|
||||
# BASIC
|
||||
# PREMIUM
|
||||
# PREMIUM_ENV_AIDING
|
||||
# MODEM_DEFAULT
|
||||
#ifndef OPLUS_BUG_COMPATIBILITY
|
||||
#ShiMinghao@CONNECTIVITY.GPS.SAP.OPCUSTOMIZED, 2020/04/14, Modify for changing SAP mode from MODEM_DEFAULT to PREMIUM
|
||||
#SAP=MODEM_DEFAULT
|
||||
#else /* OPLUS_BUG_COMPATIBILITY */
|
||||
SAP=PREMIUM
|
||||
#endif /* OPLUS_BUG_COMPATIBILITY */
|
||||
|
||||
#FREE_WIFI_SCAN_INJECT valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
FREE_WIFI_SCAN_INJECT=BASIC
|
||||
|
||||
#SUPL_WIFI valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
SUPL_WIFI=BASIC
|
||||
|
||||
#WIFI_SUPPLICANT_INFO valid modes:
|
||||
#DISABLED
|
||||
#BASIC
|
||||
WIFI_SUPPLICANT_INFO=BASIC
|
||||
|
||||
#####################################
|
||||
# Location process launcher settings
|
||||
#####################################
|
||||
|
||||
# DO NOT MODIFY
|
||||
# Modifying below attributes without
|
||||
# caution can have serious implications.
|
||||
|
||||
#Values for PROCESS_STATE:
|
||||
# ENABLED
|
||||
# DISABLED
|
||||
|
||||
#Values for LOW_RAM_TARGETS:
|
||||
# ENABLED
|
||||
# DISABLED
|
||||
# Property to enable/disable processes for low ram targets. Uses ro.config.low_ram property
|
||||
# to identify low ram targets.
|
||||
|
||||
#PROCESS_NAME
|
||||
# Name of the executable file.
|
||||
|
||||
#FEATURE MASKS:
|
||||
# GTP-WIFI 0X03
|
||||
# GTP-MP-CELL 0xc00
|
||||
# GTP-WAA 0x100
|
||||
# SAP 0Xc0
|
||||
# ODCPI 0x1000
|
||||
# FREE_WIFI_SCAN_INJECT 0x2000
|
||||
# SUPL_WIFI 0x4000
|
||||
# WIFI_SUPPLICANT_INFO 0x8000
|
||||
|
||||
#Values for PLATFORMS can be:
|
||||
#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
|
||||
#2. 'all' or 'all exclude' -> for All platforms
|
||||
#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
|
||||
|
||||
#Values for SOC_IDS can be:
|
||||
#1. Any valid values obtained from soc_id node separated by single space. For example: 339 386 436
|
||||
## soc_id value can be obtained from any one of below node:
|
||||
## - /sys/devices/soc0/soc_id
|
||||
## - /sys/devices/system/soc/soc0/id
|
||||
#2. 'all' or 'all exclude' -> for All soc id's
|
||||
#3. 'all exclude XXXX' -> All soc id's exclude XXXX. For example: all exclude 339 386
|
||||
|
||||
#Values for BASEBAND can be:
|
||||
#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
|
||||
#2. 'all' or 'all exclude' -> for all basebands
|
||||
#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
|
||||
PROCESS_NAME=lowi-server
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps wifi inet oem_2901
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0xf303
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=0
|
||||
|
||||
PROCESS_NAME=xtwifi-inet-agent
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=inet gps
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xc03
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=xtwifi-client
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=wifi inet gps system oem_2904
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xd03
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=slim_daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors
|
||||
PREMIUM_FEATURE=1
|
||||
IZAT_FEATURE_MASK=0xf0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all exclude 386 436
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
PROCESS_NAME=xtra-daemon
|
||||
PROCESS_ARGUMENT=
|
||||
PROCESS_STATE=ENABLED
|
||||
PROCESS_GROUPS=inet gps system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=ENABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=0
|
||||
|
||||
########################################
|
||||
# Engine Service which host DRE module #
|
||||
# To enable DRE engine service, change #
|
||||
# PROCESS_STATE=ENABLED #
|
||||
########################################
|
||||
PROCESS_NAME=engine-service
|
||||
PROCESS_ARGUMENT=DRE-INT libloc_epDr.so
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps diag inet qwes oem_2901 system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
|
||||
########################################
|
||||
# Engine Service which host PPE module #
|
||||
# To enable PPE engine service, change #
|
||||
# PROCESS_STATE=ENABLED #
|
||||
# and update process arugements #
|
||||
# with PPE library name #
|
||||
#PROCESS_ARGUMENT=PPE libepsimulator.so#
|
||||
########################################
|
||||
PROCESS_NAME=engine-service
|
||||
PROCESS_ARGUMENT=PPE libepsimulator.so
|
||||
PROCESS_STATE=DISABLED
|
||||
PROCESS_GROUPS=gps diag inet qwes oem_2901 system
|
||||
PREMIUM_FEATURE=0
|
||||
IZAT_FEATURE_MASK=0
|
||||
PLATFORMS=all
|
||||
SOC_IDS=all
|
||||
BASEBAND=all
|
||||
LOW_RAM_TARGETS=DISABLED
|
||||
HARDWARE_TYPE=all
|
||||
VENDOR_ENHANCED_PROCESS=1
|
||||
@@ -1,180 +0,0 @@
|
||||
################################
|
||||
# Sensor Settings
|
||||
################################
|
||||
#The following parameters are optional.
|
||||
#Internal defaults support MEMS sensors
|
||||
#native to most handset devices.
|
||||
#Device specific sensor characterization
|
||||
#for improved performance is possible as
|
||||
#described in SAP application notes.
|
||||
#GYRO_BIAS_RANDOM_WALK=
|
||||
#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
|
||||
# Hache out.
|
||||
#ODM file
|
||||
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
||||
# 4 - Debug, 5 - Verbose
|
||||
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
||||
DEBUG_LEVEL = 0
|
||||
# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
|
||||
# used in loc_eng_reinit
|
||||
SENSOR_ACCEL_BATCHES_PER_SEC=2
|
||||
SENSOR_ACCEL_SAMPLES_PER_BATCH=5
|
||||
SENSOR_GYRO_BATCHES_PER_SEC=2
|
||||
SENSOR_GYRO_SAMPLES_PER_BATCH=5
|
||||
# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
|
||||
SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
|
||||
SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
|
||||
SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
|
||||
SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
|
||||
|
||||
# Sensor Control Mode (0=AUTO, 1=FORCE_ON, 2=MODEM_DEFAULT)
|
||||
# used in loc_eng_reinit
|
||||
SENSOR_CONTROL_MODE=2
|
||||
#ODM
|
||||
# Bit mask used to define which sensor algorithms are used.
|
||||
# Setting each bit has the following definition:
|
||||
# 0x1 - DISABLE_INS_POSITIONING_FILTER
|
||||
# 0x0 - ENABLE_INS_POSITIONING_FILTER
|
||||
SENSOR_ALGORITHM_CONFIG_MASK=0x0
|
||||
|
||||
#Vehicle Network Provider configuration
|
||||
|
||||
#Service configuration strings
|
||||
#The number before colon in VN_X items defines version of the format of the rest of the string
|
||||
#VN_ACCEL_CFG=0:5
|
||||
#VN_GYRO_CFG=0:5.5
|
||||
#VN_ODOMETRY_CFG=0:2,4.5
|
||||
|
||||
################################################
|
||||
# QDR3 configurations #
|
||||
################################################
|
||||
#VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2
|
||||
#VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
|
||||
VN_SPEED_CFG=1:777,0,0,1,3,1,0.002778,0,40,8,32,8
|
||||
VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
|
||||
|
||||
################################################
|
||||
# QDR2-Gyro configurations #
|
||||
################################################
|
||||
#VN_GYRO_CFG=1:555,0,1,0,0,0,0,-6.5,6.6066,-6.5,-1.00,2,6.607,6.6068,0,0,16,0.0002,0,16,0.0002,0,16,0.0002
|
||||
#VN_SPEED_CFG=1:555,0,0,1,2,1,0.01,0,56,8,48,8
|
||||
#VN_GEAR_CFG=1:555,16,4,0,1,1,9,0,1,2,3,4,5,6,7,8
|
||||
|
||||
################################################
|
||||
# QDR2-DWT configurations #
|
||||
################################################
|
||||
#VN_SPEED_CFG=1:555,22,1,2,1,1,1,0,8,8,23,1,2,0,1,0,8,8,23,1
|
||||
#VN_GEAR_CFG=1:555,12,4,16,14,16,8,1,2,3,4,5,6,7,8
|
||||
#VN_DWS_CFG=1:555,0,0,1,3,1,1,0,0,8,0,0,8,8,0,0,16,8,0,0,24,8,0,0
|
||||
#VN_GYRO_CFG=1:555,40,16,1.0,40,16,1.0,40,16,1.0
|
||||
|
||||
#####################################################################################
|
||||
# VNW service batching configuration strings #
|
||||
# VNW provider will initialize default type as Time based batching #
|
||||
# Each service batch value is configured to be 100 #
|
||||
# VN_ACCEL_CFG_BATCH_VALUE will be treated as time in Ms if VN_CFG_BATCH_TYPE #
|
||||
# is set to time based batching #
|
||||
# VN_ACCEL_CFG_BATCH_VALUE will be treated as sample count if VN_CFG_BATCH_TYPE #
|
||||
# is set to count based batching #
|
||||
# Uncomment and update batch time /sample count as per selected batching type #
|
||||
#####################################################################################
|
||||
# Batching type
|
||||
# 1 - Time based (default)
|
||||
# 2 - Count based
|
||||
VN_CFG_BATCH_TYPE=1
|
||||
|
||||
#Vehicle Accel batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_ACCEL_CFG_BATCH_VALUE=100
|
||||
|
||||
#Vehicle Gyro batching value, it can either accept time in milli seconds or sample count
|
||||
VN_GYRO_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle Odo batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_ODOMETRY_CFG_BATCH_VALUE=100
|
||||
|
||||
#Vehicle Speed batching value, it can either accept time in milli seconds or sample count
|
||||
VN_SPEED_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle Gear batching value, it can either accept time in milli seconds or sample count
|
||||
VN_GEAR_CFG_BATCH_VALUE=50
|
||||
|
||||
#Vehicle DWS batching value, it can either accept time in milli seconds or sample count
|
||||
#VN_DWS_CFG_BATCH_VALUE=100
|
||||
####################################################################################
|
||||
|
||||
#Procesors clock ratio: AP and CAN bus microcontroller
|
||||
################################################
|
||||
# QDR3 configurations #
|
||||
################################################
|
||||
VN_PROC_CLOCK_RATIO=1.0
|
||||
|
||||
################################################
|
||||
# QDR2-DWT OR QDR2-Gyro configurations #
|
||||
################################################
|
||||
#VN_PROC_CLOCK_RATIO = 1.0
|
||||
|
||||
# Time source used by Sensor HAL
|
||||
# Setting this value controls accuracy of location sensor services.
|
||||
# 0 - Unknown
|
||||
# 1 - CLOCK_BOOTTIME
|
||||
# 2 - CLOCK_MONOTONIC
|
||||
# 3 - CLOCK_REALTIME
|
||||
# 4 - CLOCK_BOOTTIME using Alarm timer interface
|
||||
NDK_PROVIDER_TIME_SOURCE=1
|
||||
|
||||
# Sensor Batching Configuration
|
||||
# 0 - Time based
|
||||
# 1 - Fixed count based
|
||||
# 2 - Variable count based
|
||||
COUNT_BASED_BATCHING=1
|
||||
SYNC_ONCE=0
|
||||
|
||||
# Vehicle Network Data optimization
|
||||
# Default value: 0
|
||||
# Value 0x40000 - Speed(bit 18 eSLIM_SERVICE_VEHICLE_SPEED)
|
||||
# Value 0x80000 - Speed(bit 19 eSLIM_SERVICE_VEHICLE_DWS)
|
||||
# Value 0x100000 - Speed(bit 20 eSLIM_SERVICE_VEHICLE_GEAR)
|
||||
VN_ENABLE_DATA_OPTIMIZATION=0x100000
|
||||
|
||||
# Vehicle Network Data Routing time interval
|
||||
# This is applicable only if VN_ENABLE_DATA_OPTIMIZATION value is set
|
||||
# Default value: 5000 msec
|
||||
VN_DATA_ROUTING_TIME_INTERVAL_MSEC=3000
|
||||
|
||||
#Sensor HAL Provider Configuration HAL Library name including path
|
||||
################################################
|
||||
# #
|
||||
# Configuration for BMI 160 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=2
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libbmi160sensors.so.1
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for ASM330 Sensor #
|
||||
# #
|
||||
################################################
|
||||
SENSOR_TYPE=1
|
||||
SENSOR_HAL_LIB_PATH=/usr/lib/libasm330sensors.so.1
|
||||
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for IAM20680 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=3
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libiam20680sensors.so.1
|
||||
|
||||
|
||||
################################################
|
||||
# #
|
||||
# Configuration for SMI130 Sensor #
|
||||
# #
|
||||
################################################
|
||||
#SENSOR_TYPE=4
|
||||
#SENSOR_HAL_LIB_PATH=/usr/lib/libsmi130sensors.so.1
|
||||
Reference in New Issue
Block a user