avicii: Update blobs from CAF

* VENDOR from LA.UM.9.12.r1-14400-SMxx50.QSSI13.0
* QSSI from LA.QSSI.13.0.r1-09000-qssi.0
* Split CAF proprietary files
* Update Keymaster to 4.1
* Use FBE v2
* Use Non 20801/20804 (Nord) libs/firmwares
* Do not use odm/vendor dir for WCNSS_qcom_cfg.ini

proprietary/odm/etc/izat.conf

@@ -1,281 +0,0 @@
-#########################################
-# Log verbosity control for izat modules
-#########################################
-# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
-IZAT_DEBUG_LEVEL = 2
-#ODM
-##################################################
-# Select WIFI Wait Timeout value in seconds for SUPL
-##################################################
-WIFI_WAIT_TIMEOUT_SELECT = 0
-
-##################################################
-# Time interval of injecting SRN scan data to modem
-# time in seconds.
-# Note: recommended value is between 1-5 sec
-##################################################
-LPPE_SRN_DATA_SCAN_INJECT_TIME=2
-
-################################
-# NLP Settings
-################################
-# NLP_MODE  1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
-# For Automotive products, please use NLP_MODE = 4 only.
-# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
-# to determine how much Tolerance for first position
-# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
-# to determine how much Tolerance for positions after first
-# NLP_THRESHOLD: Sets how many failures needed before
-# switching preferred NLP in Combo mode
-# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
-# must be, in multiples, between two NLP location reports to
-# be considered much worse accuracy. Used in switching logic
-# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
-# whether or not to still send network location requests to
-# QNP when the EULA is not consented to by the user. QNP can
-# still return ZPP locations or injected locations even
-# without EULA consent, but the uncertainty can be high.
-# QNP preferred mode prefers QNP when there is EULA consent,
-# otherwise OSNLP is used.
-NLP_MODE = 1
-NLP_MODE_EMERGENCY = 2
-NLP_TOLERANCE_TIME_FIRST = 5000
-NLP_TOLERANCE_TIME_AFTER = 20000
-NLP_THRESHOLD = 3
-NLP_ACCURACY_MULTIPLE = 2
-NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
-
-#########################################
-# NLP PACKAGE SETTINGS
-#########################################
-# OSNLP_PACKAGE: name of default NLP package
-OSNLP_PACKAGE = com.google.android.gms
-# REGION_OSNLP_PACKAGE:
-# This value will be used as alternative
-# for particular region where default NLP is not functional.
-#REGION_OSNLP_PACKAGE =
-
-###################################
-# GEOFENCE SERVICES
-###################################
-# If set to one of the defined values below, it will override
-# the responsiveness for geofence services, which implements
-# the Proximity Alert API. If not set to a value defined below,
-# which is default, it will not override the responsivness.
-# The geofence HAL API is unaffected by this value.
-# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
-# 1: LOW responsiveness
-# 2: MEDIUM responsiveness
-# 3: HIGH responsiveness
-GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
-
-#####################################
-#GTP Opt-In app
-#####################################
-
-#GTP privacy policy version url
-#https support is required
-GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html
-
-#GTP privacy policy version download retry interval
-#unit is second. default is 86400
-GTP_PRIVACY_RETRY_INTERVAL = 86400
-
-#####################################
-# IZAT PREMIUM FEATURE SETTINGS
-#####################################
-#Possible states of a feature:
-#DISABLED
-#BASIC
-#PREMIUM
-
-#GTP_MODE valid modes:
-# DISABLED
-# LEGACY_WWAN
-# SDK (WWAN not available for Modems before LocTech 10.0)
-GTP_MODE=DISABLED
-
-#GTP_WAA valid modes:
-# DISABLED
-# BASIC
-GTP_WAA=DISABLED
-
-#SAP valid modes:
-# DISABLED
-# BASIC
-# PREMIUM
-# PREMIUM_ENV_AIDING
-# MODEM_DEFAULT
-#ifndef OPLUS_BUG_COMPATIBILITY
-#ShiMinghao@CONNECTIVITY.GPS.SAP.OPCUSTOMIZED, 2020/04/14, Modify for changing SAP mode from MODEM_DEFAULT to PREMIUM
-#SAP=MODEM_DEFAULT
-#else /* OPLUS_BUG_COMPATIBILITY */
-SAP=PREMIUM
-#endif /* OPLUS_BUG_COMPATIBILITY */
-
-#FREE_WIFI_SCAN_INJECT valid modes:
-#DISABLED
-#BASIC
-FREE_WIFI_SCAN_INJECT=BASIC
-
-#SUPL_WIFI valid modes:
-#DISABLED
-#BASIC
-SUPL_WIFI=BASIC
-
-#WIFI_SUPPLICANT_INFO valid modes:
-#DISABLED
-#BASIC
-WIFI_SUPPLICANT_INFO=BASIC
-
-#####################################
-# Location process launcher settings
-#####################################
-
-# DO NOT MODIFY
-# Modifying below attributes without
-# caution can have serious implications.
-
-#Values for PROCESS_STATE:
-# ENABLED
-# DISABLED
-
-#Values for LOW_RAM_TARGETS:
-# ENABLED
-# DISABLED
-# Property to enable/disable processes for low ram targets. Uses ro.config.low_ram property
-# to identify low ram targets.
-
-#PROCESS_NAME
-# Name of the executable file.
-
-#FEATURE MASKS:
-# GTP-WIFI    0X03
-# GTP-MP-CELL 0xc00
-# GTP-WAA     0x100
-# SAP         0Xc0
-# ODCPI      0x1000
-# FREE_WIFI_SCAN_INJECT   0x2000
-# SUPL_WIFI   0x4000
-# WIFI_SUPPLICANT_INFO   0x8000
-
-#Values for PLATFORMS can be:
-#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
-#2. 'all' or 'all exclude' -> for All platforms
-#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
-
-#Values for SOC_IDS can be:
-#1. Any valid values obtained from soc_id node separated by single space. For example: 339 386 436
-##  soc_id value can be obtained from any one of below node:
-##      - /sys/devices/soc0/soc_id
-##      - /sys/devices/system/soc/soc0/id
-#2. 'all' or 'all exclude' -> for All soc id's
-#3. 'all exclude XXXX' -> All soc id's exclude XXXX. For example: all exclude 339 386
-
-#Values for BASEBAND can be:
-#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
-#2. 'all' or 'all exclude' -> for all basebands
-#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
-PROCESS_NAME=lowi-server
-PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
-PROCESS_GROUPS=gps wifi inet oem_2901
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0xf303
-PLATFORMS=all
-SOC_IDS=all
-BASEBAND=all
-LOW_RAM_TARGETS=DISABLED
-HARDWARE_TYPE=all
-VENDOR_ENHANCED_PROCESS=0
-
-PROCESS_NAME=xtwifi-inet-agent
-PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
-PROCESS_GROUPS=inet gps
-PREMIUM_FEATURE=1
-IZAT_FEATURE_MASK=0xc03
-PLATFORMS=all
-SOC_IDS=all exclude 386 436
-BASEBAND=all
-LOW_RAM_TARGETS=DISABLED
-HARDWARE_TYPE=all
-VENDOR_ENHANCED_PROCESS=1
-
-PROCESS_NAME=xtwifi-client
-PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
-PROCESS_GROUPS=wifi inet gps system oem_2904
-PREMIUM_FEATURE=1
-IZAT_FEATURE_MASK=0xd03
-PLATFORMS=all
-SOC_IDS=all exclude 386 436
-BASEBAND=all
-LOW_RAM_TARGETS=DISABLED
-HARDWARE_TYPE=all
-VENDOR_ENHANCED_PROCESS=1
-
-PROCESS_NAME=slim_daemon
-PROCESS_ARGUMENT=
-PROCESS_STATE=DISABLED
-PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors
-PREMIUM_FEATURE=1
-IZAT_FEATURE_MASK=0xf0
-PLATFORMS=all
-SOC_IDS=all exclude 386 436
-BASEBAND=all
-LOW_RAM_TARGETS=DISABLED
-HARDWARE_TYPE=all
-VENDOR_ENHANCED_PROCESS=1
-
-PROCESS_NAME=xtra-daemon
-PROCESS_ARGUMENT=
-PROCESS_STATE=ENABLED
-PROCESS_GROUPS=inet gps system
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0
-PLATFORMS=all
-SOC_IDS=all
-BASEBAND=all
-LOW_RAM_TARGETS=ENABLED
-HARDWARE_TYPE=all
-VENDOR_ENHANCED_PROCESS=0
-
-########################################
-# Engine Service which host DRE module #
-# To enable DRE engine service, change #
-# PROCESS_STATE=ENABLED                #
-########################################
-PROCESS_NAME=engine-service
-PROCESS_ARGUMENT=DRE-INT libloc_epDr.so
-PROCESS_STATE=DISABLED
-PROCESS_GROUPS=gps diag inet qwes oem_2901 system
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0
-PLATFORMS=all
-SOC_IDS=all
-BASEBAND=all
-LOW_RAM_TARGETS=DISABLED
-HARDWARE_TYPE=all
-VENDOR_ENHANCED_PROCESS=1
-
-########################################
-# Engine Service which host PPE module #
-# To enable PPE engine service, change #
-# PROCESS_STATE=ENABLED                #
-# and update process arugements        #
-# with PPE library name                #
-#PROCESS_ARGUMENT=PPE libepsimulator.so#
-########################################
-PROCESS_NAME=engine-service
-PROCESS_ARGUMENT=PPE libepsimulator.so
-PROCESS_STATE=DISABLED
-PROCESS_GROUPS=gps diag inet qwes oem_2901 system
-PREMIUM_FEATURE=0
-IZAT_FEATURE_MASK=0
-PLATFORMS=all
-SOC_IDS=all
-BASEBAND=all
-LOW_RAM_TARGETS=DISABLED
-HARDWARE_TYPE=all
-VENDOR_ENHANCED_PROCESS=1

proprietary/odm/etc/sap.conf

@@ -1,180 +0,0 @@
-################################
-# Sensor Settings
-################################
-#The following parameters are optional.
-#Internal defaults support MEMS sensors
-#native to most handset devices.
-#Device specific sensor characterization
-#for improved performance is possible as
-#described in SAP application notes.
-#GYRO_BIAS_RANDOM_WALK=
-#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY=
-#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY=
-#RATE_RANDOM_WALK_SPECTRAL_DENSITY=
-#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY=
-# Hache out.
-#ODM file
-# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
-#               4 - Debug, 5 - Verbose
-# If DEBUG_LEVEL is commented, Android's logging levels will be used
-DEBUG_LEVEL = 0
-# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
-# used in loc_eng_reinit
-SENSOR_ACCEL_BATCHES_PER_SEC=2
-SENSOR_ACCEL_SAMPLES_PER_BATCH=5
-SENSOR_GYRO_BATCHES_PER_SEC=2
-SENSOR_GYRO_SAMPLES_PER_BATCH=5
-# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
-SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
-SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
-SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
-SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
-
-# Sensor Control Mode (0=AUTO, 1=FORCE_ON, 2=MODEM_DEFAULT)
-# used in loc_eng_reinit
-SENSOR_CONTROL_MODE=2
-#ODM
-# Bit mask used to define which sensor algorithms are used.
-# Setting each bit has the following definition:
-#  0x1 - DISABLE_INS_POSITIONING_FILTER
-#  0x0 - ENABLE_INS_POSITIONING_FILTER
-SENSOR_ALGORITHM_CONFIG_MASK=0x0
-
-#Vehicle Network Provider configuration
-
-#Service configuration strings
-#The number before colon in VN_X items defines version of the format of the rest of the string
-#VN_ACCEL_CFG=0:5
-#VN_GYRO_CFG=0:5.5
-#VN_ODOMETRY_CFG=0:2,4.5
-
-################################################
-#  QDR3 configurations                         #
-################################################
-#VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2
-#VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
-VN_SPEED_CFG=1:777,0,0,1,3,1,0.002778,0,40,8,32,8
-VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8
-
-################################################
-#  QDR2-Gyro configurations                    #
-################################################
-#VN_GYRO_CFG=1:555,0,1,0,0,0,0,-6.5,6.6066,-6.5,-1.00,2,6.607,6.6068,0,0,16,0.0002,0,16,0.0002,0,16,0.0002
-#VN_SPEED_CFG=1:555,0,0,1,2,1,0.01,0,56,8,48,8
-#VN_GEAR_CFG=1:555,16,4,0,1,1,9,0,1,2,3,4,5,6,7,8
-
-################################################
-#  QDR2-DWT configurations                     #
-################################################
-#VN_SPEED_CFG=1:555,22,1,2,1,1,1,0,8,8,23,1,2,0,1,0,8,8,23,1
-#VN_GEAR_CFG=1:555,12,4,16,14,16,8,1,2,3,4,5,6,7,8
-#VN_DWS_CFG=1:555,0,0,1,3,1,1,0,0,8,0,0,8,8,0,0,16,8,0,0,24,8,0,0
-#VN_GYRO_CFG=1:555,40,16,1.0,40,16,1.0,40,16,1.0
-
-#####################################################################################
-#                    VNW service batching configuration strings                     #
-# VNW provider will initialize default type as Time based batching                  #
-# Each service batch value is configured to be 100                                  #
-# VN_ACCEL_CFG_BATCH_VALUE will be treated as time in Ms if VN_CFG_BATCH_TYPE       #
-# is set to time based batching                                                     #
-# VN_ACCEL_CFG_BATCH_VALUE will be treated as sample count if VN_CFG_BATCH_TYPE     #
-# is set to count based batching                                                    #
-# Uncomment and update batch time /sample count as per selected batching type       #
-#####################################################################################
-# Batching type
-# 1 - Time based  (default)
-# 2 - Count based
-VN_CFG_BATCH_TYPE=1
-
-#Vehicle Accel batching value, it can either accept time in milli seconds or sample count
-#VN_ACCEL_CFG_BATCH_VALUE=100
-
-#Vehicle Gyro batching value, it can either accept time in milli seconds or sample count
-VN_GYRO_CFG_BATCH_VALUE=50
-
-#Vehicle Odo batching value, it can either accept time in milli seconds or sample count
-#VN_ODOMETRY_CFG_BATCH_VALUE=100
-
-#Vehicle Speed batching value, it can either accept time in milli seconds or sample count
-VN_SPEED_CFG_BATCH_VALUE=50
-
-#Vehicle Gear batching value, it can either accept time in milli seconds or sample count
-VN_GEAR_CFG_BATCH_VALUE=50
-
-#Vehicle DWS batching value, it can either accept time in milli seconds or sample count
-#VN_DWS_CFG_BATCH_VALUE=100
-####################################################################################
-
-#Procesors clock ratio: AP and CAN bus microcontroller
-################################################
-#  QDR3 configurations                         #
-################################################
-VN_PROC_CLOCK_RATIO=1.0
-
-################################################
-#  QDR2-DWT OR QDR2-Gyro configurations        #
-################################################
-#VN_PROC_CLOCK_RATIO = 1.0
-
-# Time source used by Sensor HAL
-# Setting this value controls accuracy of location sensor services.
-#  0 - Unknown
-#  1 - CLOCK_BOOTTIME
-#  2 - CLOCK_MONOTONIC
-#  3 - CLOCK_REALTIME
-#  4 - CLOCK_BOOTTIME using Alarm timer interface
-NDK_PROVIDER_TIME_SOURCE=1
-
-# Sensor Batching Configuration
-# 0 - Time based
-# 1 - Fixed count based
-# 2 - Variable count based
-COUNT_BASED_BATCHING=1
-SYNC_ONCE=0
-
-# Vehicle Network Data optimization
-# Default value: 0
-# Value 0x40000 -  Speed(bit 18 eSLIM_SERVICE_VEHICLE_SPEED)
-# Value 0x80000 -  Speed(bit 19 eSLIM_SERVICE_VEHICLE_DWS)
-# Value 0x100000 -  Speed(bit 20 eSLIM_SERVICE_VEHICLE_GEAR)
-VN_ENABLE_DATA_OPTIMIZATION=0x100000
-
-# Vehicle Network Data Routing time interval
-# This is applicable only if VN_ENABLE_DATA_OPTIMIZATION value is set
-# Default value: 5000 msec
-VN_DATA_ROUTING_TIME_INTERVAL_MSEC=3000
-
-#Sensor HAL Provider Configuration HAL Library name including path
-################################################
-#                                              #
-# Configuration for BMI 160 Sensor             #
-#                                              #
-################################################
-#SENSOR_TYPE=2
-#SENSOR_HAL_LIB_PATH=/usr/lib/libbmi160sensors.so.1
-
-################################################
-#                                              #
-# Configuration for ASM330 Sensor              #
-#                                              #
-################################################
-SENSOR_TYPE=1
-SENSOR_HAL_LIB_PATH=/usr/lib/libasm330sensors.so.1
-
-
-################################################
-#                                              #
-# Configuration for IAM20680 Sensor            #
-#                                              #
-################################################
-#SENSOR_TYPE=3
-#SENSOR_HAL_LIB_PATH=/usr/lib/libiam20680sensors.so.1
-
-
-################################################
-#                                              #
-# Configuration for SMI130 Sensor              #
-#                                              #
-################################################
-#SENSOR_TYPE=4
-#SENSOR_HAL_LIB_PATH=/usr/lib/libsmi130sensors.so.1

proprietary/odm/vendor/etc/wifi/WCNSS_qcom_cfg.ini

@@ -1,775 +0,0 @@
-#OplusVersion=2022030413
-# This file allows user to override the factory
-# defaults for the WLAN Driver
-
-# Enable IMPS or not
-gEnableImps=1
-
-# Enable BMPS or not
-gEnableBmps=1
-
-# Phy Mode (auto, b, g, n, etc)
-# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
-# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
-# 7 = 11b only 8 = 11ac only.
-gDot11Mode=0
-
-# Assigned MAC Addresses - This will be used until NV items are in place
-# Each byte of MAC address is represented in Hex format as XX
-Intf0MacAddress=000AF58989FF
-Intf1MacAddress=000AF58989FE
-Intf2MacAddress=000AF58989FD
-Intf3MacAddress=000AF58989FC
-
-# UAPSD service interval for VO,VI, BE, BK traffic
-InfraUapsdVoSrvIntv=0
-InfraUapsdViSrvIntv=0
-InfraUapsdBeSrvIntv=0
-InfraUapsdBkSrvIntv=0
-
-# Flag to allow STA send AddTspec even when ACM is Off
-gAddTSWhenACMIsOff=1
-
-# Flags to filter Mcast and Bcast RX packets.
-# Value 0: No filtering, 1: Filter all Multicast.
-# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
-McastBcastFilter=3
-
-#Flag to enable HostARPOffload feature or not
-hostArpOffload=1
-
-#Flag to enable HostNSOffload feature or not
-hostNSOffload=1
-
-# 802.11n Protection flag
-gEnableApProt=1
-
-#Enable OBSS protection
-#ifndef OPLUS_BUG_STABILITY
-#Qiulei@CONNECTIVITY.WiFi.Power.1116749,2017/09/22
-#Modify for wifi softap standby current
-#gEnableApOBSSProt=1
-#else /* OPLUS_BUG_STABILITY */
-gEnableApOBSSProt=0
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Min.Yi@CONNECTIVITY.WiFi.Hardware.Power.1323750, 2018/03/21
-#Add for high current when download on 11B
-#g11bNumTxChains=1
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Guotian.Wu@CONNECTIVITY.WiFi.Hardware.OpCustomized.1123073, 2019/07/02
-#disable for CTS test fail
-gEnableRTTSupport=0
-#endif /* OPLUS_BUG_STABILITY */
-
-#Enable/Disable UAPSD for SoftAP
-gEnableApUapsd=1
-
-# Fixed Rate
-gFixedRate=0
-
-# Maximum Tx power
-# gTxPowerCap=30
-
-# Fragmentation Threshold
-# gFragmentationThreshold=2346
-
-# RTS threshold
-RTSThreshold=1048576
-
-# Intra-BSS forward
-gDisableIntraBssFwd=0
-
-# WMM Enable/Disable
-WmmIsEnabled=0
-
-# 802.11d support
-g11dSupportEnabled=0
-
-# 802.11h support
-g11hSupportEnabled=1
-
-# DFS Master Capability
-#ifndef OPLUS_BUG_STABILITY
-#WuGuotian@CONNECTIVITY.WIFI.BASE.OPERATOR.2062392, 2019/5/23,
-#change for SoftAP P2P-GO cannot operate on DFS channel
-#gEnableDFSMasterCap=1
-#else /* OPLUS_BUG_STABILITY */
-gEnableDFSMasterCap=0
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifndef OPLUS_BUG_STABILITY
-#WuGuotian@CONNECTIVITY.WIFI.BASE.OPERATOR.2062392, 2019/05/31,
-#fix EU JP band1 band4 issue
-etsi13_srd_chan_in_master_mode=1
-#endif /* OPLUS_BUG_STABILITY */
-
-# ESE Support and fast transition
-EseEnabled=0
-
-ImplicitQosIsEnabled=0
-
-gNeighborScanTimerPeriod=200
-#ifdef OPLUS_BUG_STABILITY
-#Botao.Cu@CONNECTIVITY.WiFi.Connect.select.1064666, 2017/01/04,
-#add for select 5G wifi preferentially
-#gNeighborLookupThreshold=76
-#endif /* OPLUS_BUG_STABILITY */
-gNeighborScanChannelMinTime=20
-gNeighborScanChannelMaxTime=30
-gMaxNeighborReqTries=3
-
-# Legacy (non-ESE, non-802.11r) Fast Roaming Support
-# To enable, set FastRoamEnabled=1
-# To disable, set FastRoamEnabled=0
-FastRoamEnabled=1
-
-# Check if the AP to which we are roaming is better than current AP in
-# terms of RSSI.  Checking is disabled if set to Zero.Otherwise it will
-# use this value as to how better the RSSI of the new/roamable AP should
-# be for roaming
-#ifndef OPLUS_BUG_STABILITY
-#Botao.Cu@CONNECTIVITY.WiFi.Connect.roaming.1065694, 2016/07/06
-#modify for [C18]: modify the roaming value.
-#RoamRssiDiff=5
-#else  OPLUS_BUG_STABILITY
-RoamRssiDiff=8
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifndef OPLUS_BUG_STABILITY
-#LuoChuang@CONNECTIVITY.WIFI.CONNECTION.CONNECT.579908, 2020/12/01
-#Disable HIRSSI roaming
-gRoamScanHiRssiDelta=0
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Botao.Cu@CONNECTIVITY.WiFi.Connect.select.1064666, 2017/01/04,
-#add for select 5G wifi preferentially
-gRoamPrefer5GHz=1
-gSelect5GHzMargin=5
-
-#set roam_bad_rssi_thresh_offset_2g = 0, avoid background roaming roam from 2g to 5g
-# RSSI threshold offset for 2G to 5G roam
-roam_bad_rssi_thresh_offset_2g=0
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Add for dense roam
-gtraffic_threshold=55
-groam_dense_rssi_thresh_offset=0
-
-#ifndef OPLUS_BUG_STABILITY
-#LiJunlong@CONNECTIVITY.WIFI.NETWORK.295941.2020/09/01,Modify for ini file update
-#gNeighborLookupThreshold=80
-#else /* OPLUS_BUG_STABILITY */
-gNeighborLookupThreshold=78
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#LiJunlong@CONNECTIVITY.WIFI.NETWORK.295941.2020/09/01,Add for ini file update
-global_adapt_dwelltime_mode = 1
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifndef OPLUS_BUG_COMPATIBILITY
-#FanBingqi@CONNECTIVITY.WIFI.CONNECTION.4506, 2020/08/12,
-#Add for Qpower parameter,0=disable,1=enable
-gOptimizedPowerManagement=1
-#endif /* OPLUS_BUG_COMPATIBILITY */
-
-#add for roam scan diff
-gRoamRescanRssiDiff=3
-#add for disable background scan roam
-roam_bg_scan_client_bitmap=0
-#endif /* OPLUS_BUG_STABILITY */
-
-# To enable, set gRoamIntraBand=1 (Roaming within band)
-# To disable, set gRoamIntraBand=0 (Roaming across band)
-gRoamIntraBand=0
-
-#Short Guard Interval Enable/disable
-gShortGI20Mhz=1
-gShortGI40Mhz=1
-
-#Auto Shutdown  Value in seconds. A value of 0 means Auto shutoff is disabled
-gAPAutoShutOff=0
-
-#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
-gWlanAutoShutdown = 0
-
-# Not used.
-gApAutoChannelSelection=0
-
-#Preferred band (both or 2.4 only or 5 only)
-BandCapability=0
-
-#Channel Bonding
-gChannelBondingMode5GHz=1
-
-#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
-#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
-#is idle for last 10 seconds.) For both active and power save clients.
-
-#Power save clients: DUT set TIM bit from 10th second onwards and till client
-#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
-
-#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
-#success still we try on 11th second if not tries on 12th and so on till 15th
-#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
-#case DUT will detect client got removed in (10+5) seconds.
-#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
-
-#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
-#it is period where we send NULL frame.
-#gApLinkMonitorPeriod = 10
-#gGoLinkMonitorPeriod = 10
-
-#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
-#are succeed to send or not. Hence total effective detection time is
-# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
-# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
-gGoKeepAlivePeriod = 20
-gApKeepAlivePeriod = 20
-
-#If set will start with active scan after driver load, otherwise will start with
-#passive scan to find out the domain
-gEnableBypass11d=1
-
-#If set to 0, will not scan DFS channels
-gEnableDFSChnlScan=1
-
-# Enable DFS channel roam
-# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
-gAllowDFSChannelRoam=1
-
-gVhtChannelWidth=2
-
-#Data Inactivity Timeout when in powersave (in ms)
-gDataInactivityTimeout=200
-
-# Set txchainmask and rxchainmask
-# These parameters are used only if gEnable2x2 is 0
-# Valid values are 1,2
-# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
-# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
-gSetTxChainmask1x1=1
-gSetRxChainmask1x1=1
-
-# Scan Timing Parameters
-# gPassiveMaxChannelTime=110
-# gPassiveMinChannelTime=60
-#ifdef OPLUS_BUG_STABILITY
-#Botao.Cu@CONNECTIVITY.WiFi.Connect.Scan.958144, 2017/04/20,
-#Modify for enlarge scan result
-#gActiveMaxChannelTime=40
-#gActiveMinChannelTime=20
-#else
-gActiveMaxChannelTime=60
-gActiveMinChannelTime=40
-#endif /* OPLUS_BUG_STABILITY */
-
-#If set to 0, MCC is not allowed.
-gEnableMCCMode=1
-
-# MCC to SCC Switch mode:
-# 0-Disable
-# 1-Enable
-# 2-Force SCC if same band, with SAP restart
-# 3-Force SCC if same band, without SAP restart by sending (E)CSA
-# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
-#   without SAP restart by sending (E)CSA
-#ifdef OPLUS_BUG_STABILITY
-#JiaoBo@CONNECTIVITY.WIFI.BASIC.SOFTAP.2138454, 2019/07/04,
-#remove for: support mcc mode in scene opening 2.4g hotspot when wifi connect to 5g.
-#gWlanMccToSccSwitchMode = 3
-#else
-gWlanMccToSccSwitchMode = 6
-#endif /* OPLUS_BUG_STABILITY */
-
-# 1=enable STBC; 0=disable STBC
-gEnableRXSTBC=1
-
-# 1=enable tx STBC; 0=disable
-gEnableTXSTBC=1
-
-# 1=enable rx LDPC; 0=disable
-gEnableRXLDPC=1
-
-#Enable/Disable Tx beamforming
-gTxBFEnable=1
-
-#Enable/Disable Tx beamformee in SAP mode
-gEnableTxBFeeSAP=1
-
-# Enable Tx beamforming in VHT20MHz
-# Valid values are 0,1. If commented out, the default value is 0.
-# 0=disable, 1=enable
-gEnableTxBFin20MHz=1
-
-#Enable/Disable SU Tx beamformer support.
-gEnableTxSUBeamformer=1
-
-gEnableFastRoamInConcurrency=1
-
-#Maxium Channel time in msec
-gMaxMediumTime = 6000
-
-# 802.11K support
-gRrmEnable=1
-
-#Enable Power Save offload
-#ifndef OPLUS_BUG_STABILITY
-#Wei.Wang@CONNECTIVITY.WiFi.Network.quality.1170942, 2017/12/04,
-#disable qpower,to decrease ping delay and improve download speed
-#gEnablePowerSaveOffload=2
-#else /* OPLUS_BUG_STABILITY */
-gEnablePowerSaveOffload=1
-#endif /* OPLUS_BUG_STABILITY */
-
-#Enable firmware uart print
-gEnablefwprint=0
-
-# Firmware log mode
-# Valid values are 0,1,2
-# 0=Disable, 1=WMI, 2=DIAG
-gEnablefwlog=1
-
-# Maximum Receive AMPDU size (VHT only. Valid values:
-# 0->8k 1->16k 2->32k 3->64k 4->128k)
-gVhtAmpduLenExponent=7
-
-# Maximum MPDU length (VHT only. Valid values:
-# 0->3895 octets, 1->7991 octets, 2->11454 octets)
-gVhtMpduLen=2
-
-# Maximum number of wow filters required
-#gMaxWoWFilters=22
-
-# WOW Enable/Disable.
-# 0 - Disable both magic pattern match and pattern byte match.
-# 1 - Enable magic pattern match on all interfaces.
-# 2 - Enable pattern byte match on all interfaces.
-# 3 - Enable both magic pattern and pattern byte match on all interfaces.
-# Default value of gEnableWoW is 3.
-# gEnableWoW=0
-
-# Enable or Disable MCC Adaptive Scheduler at the FW
-# 1=Enable (default), 0=Disable
-gEnableMCCAdaptiveScheduler=1
-
-#Enable or Disable p2p device address administered
-isP2pDeviceAddrAdministrated=0
-
-# Remove Overlap channel restriction
-gEnableOverLapCh=0
-
-#Enable VHT on 2.4Ghz
-gEnableVhtFor24GHzBand=1
-
-#Maximum number of offload peers supported
-# gMaxOffloadPeers=2
-
-# controlling the following offload patterns
-# through ini parameter. Default value is 1
-# to disable set it to zero. ssdp = 0
-# Setup multicast pattern for mDNS 224.0.0.251,
-# SSDP 239.255.255.250 and LLMNR 224.0.0.252
-ssdp=0
-
-#Enable Memory Deep Sleep
-gEnableMemDeepSleep=1
-
-# Regulatory Setting; 0=STRICT; 1=CUSTOM
-gRegulatoryChangeCountry=1
-
-# RA filtering rate limit param, the current value would not
-# help if the lifetime in RA is less than 3*60=3min. Then
-# we need to change it, though it is uncommon.
-# gRAFilterEnable=0
-gRArateLimitInterval=600
-
-# Maximum number of concurrent connections
-gMaxConcurrentActiveSessions=3
-
-# Disable/Enable GreenAP
-# 0 to disable, 1 to enable, default: 1
-gEnableGreenAp=0
-
-# Radar PRI multiplier
-gDFSradarMappingPriMultiplier=4
-
-gPNOScanSupport=1
-
-#Enable/Disable LPASS support
-# 0 to disable, 1 to enable
-gEnableLpassSupport=1
-
-# Whether userspace country code setting shld have priority
-gCountryCodePriority=1
-
-# Enable(1)/Disable(0) SIFS burst
-gEnableSifsBurst=1
-
-# Enable or Disable Multi-user MIMO
-# 1=Enable (default), 0=Disable
-gEnableMuBformee=1
-
-# Enable/Disable channel avoidance for SAP in SCC scenario
-# 0 - disable
-# 1 - enable
-gSapSccChanAvoidance=0
-
-# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
-gIbssTxSpEndInactivityTime=10
-
-# Enable support for TDLS
-#  0 - disable
-#  1 - enable
-gEnableTDLSSupport=1
-
-# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
-# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
-# and RSSI) is met and then will initiate teardown when teardown criteria
-# (idle packet count and RSSI) is met.
-#  0 - disable
-#  1 - enable
-gEnableTDLSImplicitTrigger=1
-
-# Enable TDLS External Control. That is, user space application has to
-# first configure a peer MAC in wlan driver towards which TDLS is desired.
-# Device will establish TDLS only towards those configured peers whenever
-# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
-# when teardown criteria (idle packet count and RSSI) is met. However,
-# device will accept TDLS connection if it is initiated from any other peer,
-# even if that peer is not configured.
-#  0 - disable
-#  1 - enable
-# For TDLS External Control, Implicit Trigger must also be enabled.
-gTDLSExternalControl=1
-
-# Enable support for TDLS off-channel operation
-#  0 - disable
-#  1 - enable
-# TDLS off-channel operation will be invoked when there is only one
-# TDLS connection.
-gEnableTDLSOffChannel=1
-
-# Enable or Disable Random MAC (Spoofing)
-# 1=Enable (default), 0=Disable
-gEnableMacAddrSpoof=1
-
-################ Datapath feature set Begin ################
-# Bus bandwidth threshold values in terms of number of packets
-gBusBandwidthHighThreshold=2000
-gBusBandwidthMediumThreshold=500
-gBusBandwidthLowThreshold=150
-
-# Bus bandwidth compute timeout value in ms
-gBusBandwidthComputeInterval=100
-
-# VHT Tx/Rx MCS values
-# Valid values are 0,1,2. If commented out, the default value is 0.
-# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
-gVhtRxMCS=2
-gVhtTxMCS=2
-
-# VHT Tx/Rx MCS values for 2x2
-# Valid values are 0,1,2. If commented out, the default value is 0.
-# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
-gEnable2x2=1
-gVhtRxMCS2x2=2
-gVhtTxMCS2x2=2
-
-#IPA config is a bit mask and following are the configurations.
-#bit0 IPA Enable
-#bit1 IPA PRE Filter enable
-#bit2 IPv6 enable
-#bit3 IPA Resource Manager (RM) enable
-#bit4 IPA Clock scaling enable
-#bit5 IPA uC ENABLE
-#bit6 IPA uC STA ENABLE
-#bit8 IPA Real Time Debugging
-gIPAConfig=0x7d
-gIPADescSize=800
-
-# Enable/Disable RX full reorder offload
-gReorderOffloadSupported=1
-
-# Enable CE classification
-# 1 - enable(default)  0 - disable
-gCEClassifyEnable=1
-
-# Enable Rx handling options
-# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
-rx_mode=5
-
-# Enable(Tx) fastpath for data traffic.
-# 1 - enable(default)  0 - disable
-gEnableFastPath=1
-
-# This flag enables IP, TCP and UDP checksum offload
-# 1 - enable(default)  0 - disable
-gEnableIpTcpUdpChecksumOffload=1
-
-# Enable TCP Segmentation Offload
-# 1 - enable  0 - disable
-TSOEnable=1
-
-# Enable Generic Receive Offload
-# 1 - enable(default)  0 - disable
-#ifndef OPLUS_BUG_STABILITY
-#Rongzheng.tang@CONNECTIVITY.WiFi.Network.1389443, 2019/05/23
-GROEnable=1
-#endif /* OPLUS_BUG_STABILITY */
-
-# Enable HT MPDU Density
-# 4 for 2 micro sec
-ght_mpdu_density=4
-
-# Enable flow steering to enable multiple CEs for Rx flows.
-# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
-# Parallel Rx paths.
-# 1 - enable 0 - disable(default)
-gEnableFlowSteering=1
-
-# Time in microseconds after which a NAPI poll must yield
-ce_service_max_yield_time=500
-
-#Maximum number of HTT messages to be processed per NAPI poll
-ce_service_max_rx_ind_flush=1
-
-# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
-maxMSDUsPerRxInd=8
-
-# Enable NUD tracking feature
-# 1 - enable 0 - disable(default)
-#ifndef OPLUS_BUG_STABILITY
-#Junyuan.Huang@CONNECTIVITY.WiFi.Network.internet.1405517,2018/12/22
-#Modify for disable gEnableNUDTracking in wifi driver
-#gEnableNUDTracking=1
-#else
-gEnableNUDTracking=0
-#endif /*OPLUS_BUG_STABILITY*/
-
-# Enable PEER UNMAP CONF SUPPORT
-# 1 - enable 0 - disable(default)
-gEnablePeerUnmapConfSupport=1
-
-################ Datapath feature set End ################
-
-################ NAN feature set start ###################
-
-# Enable NAN discovery (NAN 1.0)
-# 1 - enable  0 - disable(default)
-gEnableNanSupport=1
-# Enable NAN Datapath
-genable_nan_datapath=1
-
-################ NAN feature set end #####################
-
-#ifndef OPLUS_BUG_STABILITY
-#Shimin.Jiang@CONNECTIVITY.WiFi.Connect.Scan.1405517,2018/5/31
-#Modify for disable adaptive dwell scan mode
-#adaptive_dwell_mode_enabled=1
-#else
-adaptive_dwell_mode_enabled=0
-#endif /*OPLUS_BUG_STABILITY*/
-
-hostscan_adaptive_dwell_mode=1
-
-adapt_dwell_lpf_weight=80
-
-adapt_dwell_wifi_act_threshold=10
-
-MAWCEnabled=0
-
-# Enable/Disable rtt sta mac randomization
-enable_rtt_mac_randomization=1
-
-# Create another interface during driver load
-#ifdef OPLUS_BUG_STABILITY
-#JunYuan.Huang@CONNECTIVITY.WiFi.AutoConnect.1882408 2019/09/27
-#Add for dual sta can not up wlan1
-#gEnableConcurrentSTA=wlan1
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Aligning with Oneplus R ini parameters
-#Sukshata@CONNECTIVITY.WIFI.HARDWARE.RSSI.2810957,2022/01/04
-gEnableSNRMonitoring=1
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifndef OPLUS_BUG_STABILITY
-#Jie.Huang@CONNECTIVITY.WiFi.AutoConnect.1881594 2019/03/13
-#Add for : bug 1881594 the signal of the wifi receiveing  from the ap sometimes suddenly deteriorates.
-# 1- Enable DTIM Synth
-# 0- Disable DTIM Synth
-gEnableLPRx=0
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#genglin.lian@CONNECTIVITY.WiFi.Connect.Scan.1975483, 2019/05/01,
-# 0 - disable
-# 1 - enable
-#Disallow the beacons/probe resp from adjacent channels
-allow_adj_chan_bcns=0
-
-#Shimin.Jiang@CONNECTIVITY.WiFi.Connect.dhcp.1037520, 2017/07/07,
-#Add for some ap don't response to dhcp discovery paket with qos flag equals voice
-arp_ac_category=0
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Yadong.Hu@Connectivity.WiFi.Connect.disconnect.956254, 2017/04/20,
-#Add for set value of kick out, 2047 means if DUT missed 2047 packets from AP, then disconnect
-gDroppedPktDisconnectTh=2047
-
-#Add for set value of beacon miss, 15 and 25 means 40 beacon miss,then maybe trigger disconnect
-gRoamBmissFirstBcnt=15
-gRoamBmissFinalBcnt=25
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Aligning with Oneplus R ini parameters
-#Sukshata@CONNECTIVITY.WIFI.TPUT.2896874 ,2022/01/07
-gEnableEdcaParams=0
-#endif OPLUS_BUG_STABILITY
-gEdcaVoCwmin=2
-gEdcaViCwmin=2
-gEdcaBkCwmin=2
-gEdcaBeCwmin=2
-
-gEdcaVoCwmax=3
-gEdcaViCwmax=3
-gEdcaBkCwmax=3
-gEdcaBeCwmax=3
-
-gEdcaVoAifs=0
-gEdcaViAifs=0
-gEdcaBkAifs=0
-gEdcaBeAifs=0
-
-#TangRongzheng@CONNECTIVITY.WIFI.NETWORK.1063609, 2017/03/30, add for enable PER based roaming
-# enabled for Tx and Rx traffic
-gper_roam_enabled=3
-
-# Mbps x 10
-gper_roam_high_rate_th=540
-gper_roam_low_rate_th =150
-
-# high PER rate % for roaming scan triggered
-gper_roam_th_percent=80
-gper_roam_rest_time=60
-
-#HuangYuan@CONNECTIVITY.WIFI.NETWORK.1064218, 2016/08/04, add for QQ message delays when DUT is asleep
-rx_wakelock_timeout=250
-
-#TangRongzheng@CONNECTIVITY.WIFI.NETWORK.1031774, 2017/06/18, add for disable active mode offload.
-gActiveModeOffload=0
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_FEATURE_WIFI_DATASTALL
-#HuangYuan@CONNECTIVITY.WIFI.NETWORK.4494, 2017/10/30,
-#Add for data stall detection
-gEnableDataStallDetection=1
-
-#Ziqiang.Yu@CONNECTIVITY.WiFi.Network.internet.1140781, 2019/08/20,
-#disable 2.4G HT40
-gChannelBondingMode24GHz =0
-#endif /* OPLUS_FEATURE_WIFI_DATASTALL */
-
-#ifdef OPLUS_BUG_STABILITY
-#Pan.Zhang@CONNECTIVITY.WiFi.Basic.Log.1072015, 2017/11/23,
-#Add for enable Packet Log
-gEnablePacketLog=1
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Yuanliu.Tang@CONNECTIVITY.WiFi.Basic.Crash.1135753, 2017/05/27
-#Add for open walkround feature to avoid MTK AP crash,QC case2952499
-gForce1x1Exception=0
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Qiulei@CONNECTIVITY.WiFi.Hardware.1065440, 2017/05/16
-#Add for show the max linkspeed
-gReportMaxLinkSpeed=1
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Qiulei@CONNECTIVITY.WiFi.Power.802254, 2016/07/20
-#Add for : reduce ap sleep current
-gApLinkMonitorPeriod = 25
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifndef OPLUS_BUG_COMPATIBILITY
-#HuiTao@CONNECTIVITY.WiFi.Basic.Custom.1067549, 2018/01/02,
-#Modify for country code JP soft ap cant got 5G list for bug:1194908
-gindoor_channel_support=1
-#endif /* OPLUS_BUG_COMPATIBILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Tao.Hui@CONNECTIVITY.WiFi.Basic.Custom.1884719 2019/03/08
-#add for bdf fw rus
-gEnableForceTargetAssert=1
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Yuan.Huang@CONNECTIVITY.WiFi.Network.internet.1809314, 2019/07/24,
-#Add for Dual STA connect leaky APs with 1x1
-gActionOUIConnect1x1=000C43 04 03000000 70 35 A2 000CE7 04 00000000 F0 35 A2 001018 06 0200000C0000 BC 2D 52 00E04C 03 020160 E0 35 A2
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifndef OPLUS_BUG_STABILITY
-#ShiXing.Ke@CONNECTIVITY.Wifi.Connect.auth.1058482,bug1496579 2018/07/28,
-#Modify for bssid_hint_priority default is 0 in .h file
-is_bssid_hint_priority=1
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifndef OPLUS_BUG_STABILITY
-#Jian.Wang@CONNECTIVITY.WiFi.Basic.Crash.1340840, 2018/05/17,
-#Add for enable Self Recovery for crash
-gEnableSelfRecovery=1
-#endif /* OPLUS_BUG_STABILITY */
-
-# Rx thread affinity mask in UL case
-RX_THREAD_UL_CPU_AFFINITY_MASK=0xc0
-
-#ifdef OPLUS_BUG_STABILITY
-#Wei.Wang@CONNECTIVITY.WiFi.Network.internet.2796551, 2020/02/09,
-#Add for [BUGID],disble enable_disconnect_roam_offload
-enable_disconnect_roam_offload=0
-#endif /* OPLUS_BUG_STABILITY */
-
-
-#ifdef OPLUS_BUG_STABILITY
-#CuBotao@CONNECTIVITY.WIFI.CONNECT,Add for,2020/11/11
-gInitialScanNoDFSChnl=1
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#HuChao@CONNECTIVITY.WIFI.CONNECTION.SCAN.787904,2021/01/04
-# Add for scan dev whose beacon is invalid with wrong length
-scan_allow_bss_with_corrupted_ie=1
-
-# Add for scan dev whose beacon channel mismatch
-drop_bcn_on_chan_mismatch=0
-#endif /*OPLUS_BUG_STABILITY*/
-
-#ifdef OPLUS_BUG_STABILITY
-#HuChao@CONNECTIVITY.WiFi.CONNECT.scan.719365, 2020/12/18,
-enable_pending_list_req=1
-#endif /* OPLUS_BUG_STABILITY */
-
-#ifdef OPLUS_BUG_STABILITY
-#Aligning with Oneplus R ini parameters
-#Sukshata@CONNECTIVITY.WIFI.HARDWARE.RSSI.2810957,2022/01/04
-g_disable_hw_assist=0
-gDualMacFeatureDisable=1
-#endif /* OPLUS_BUG_STABILITY */
-END
-
-# Note: Configuration parser would not read anything past the END marker
-