avicii: Import vendor from AC2003_11_F.18
This commit is contained in:
KakatkarAkshay
130
proprietary/vendor/etc/ArmHDCP_QTI_Android.cfg
vendored
Normal file
130
proprietary/vendor/etc/ArmHDCP_QTI_Android.cfg
vendored
Normal file
@@ -0,0 +1,130 @@
|
||||
#Main logging indication
|
||||
EnableLogs=True
|
||||
|
||||
#Debug detailing level
|
||||
#if commented \ removed it will use default: full info
|
||||
# 0 - nothing
|
||||
# 3 - critical errors
|
||||
# 5 - critical info
|
||||
# 10 - errors
|
||||
# 30 - warnings
|
||||
# 40 - info
|
||||
# 50 - additional info
|
||||
# 60 - full info
|
||||
DebugLevel=40
|
||||
|
||||
#Directory of HDCP TrustZone application file
|
||||
#Uncomment the following line in order to override system default value
|
||||
#ifdef VENDOR_EDIT
|
||||
#Long.Liu@BSP.Fingerprint.Secure , 2020/06/08, modify for HDCP ta PATH
|
||||
TzAppPath=/odm/vendor/firmware
|
||||
#TzAppPath=/vendor/firmware
|
||||
#endif
|
||||
|
||||
#Secure File System path.
|
||||
#In Arm HDCP versions prior to 4.0.0, this parameter was named "UserRootDir".
|
||||
#Unless required for backward compatibility, Arm recommends not to change the value of this parameter.
|
||||
#SfsPath=/persist/data
|
||||
|
||||
#Enable / Disable file logs. If set to "False" - file logs will be disabled
|
||||
UseLogFile=False
|
||||
LogPath=/data/local/tmp
|
||||
LogFileName=hdcp.log
|
||||
LogFileMaxSize=52428800
|
||||
MaxNumOfLogFiles=40
|
||||
|
||||
#Merge the client logs into logcat
|
||||
#comment out \ remove to disable
|
||||
LogcatLogs=True
|
||||
|
||||
#Enable stdout logs. For production devices, this parameter must be set to False
|
||||
StdoutLogs=False
|
||||
|
||||
#HLOS data dir, comment out \ remove to enable default value (/data/system)
|
||||
HlosDataDir = /data/system
|
||||
|
||||
#Set True/False
|
||||
#Set value for capbiliy mask : TRANSMITTER_LOCALITY_PRECOMPUTE_SUPPORT_BIT_MASK and RECEIVER_LOCALITY_PRECOMPUTE_SUPPORT_BIT_MASK as part of spcification. Default value is True.
|
||||
IsLocalityCheckPreComputeSupported=True
|
||||
|
||||
#Transmitter only - number of Max LC retries, for any reason. This should not exceed the spcification 1023 re-attempts. For the total number of attempts, add 1 to this parameter.
|
||||
#if commented \ removed it will use default (1023)
|
||||
TotalLcRetries=1023
|
||||
|
||||
#Transmitter only - number of LC retries, out of the total TotalLcRetries, which are due to LC_SEND_L_PRIME not arrived in pre-compute mode, or due to cryptographic failured caused by a LC_SEND_L_PRIME arriving in delay,
|
||||
# or wrong LC_SEND_L_PRIME content
|
||||
#These retries are subset of the total retries in TotalLcRetries, so this parameter should be always less than the maximum specification allowed 1023 retries, but must also be less than TotalLcRetries
|
||||
#This parameter will leave total number of TotalLcRetries-HlosLcTimeoutRetries retries due to the case of message arrived too late (more than 7ms, verified in TEE)
|
||||
HlosLcTimeoutRetries=9
|
||||
#for locality check with pre-compute capability - time for retry in soruce (in HLOS), in case that no message received from sink
|
||||
LcPreComputeHlosTimeout=100
|
||||
|
||||
#overall connection timeout
|
||||
#remove \ comment to use default (10000)
|
||||
UpstreamOverallAuthenticationTimeout=10000
|
||||
DownsOverallAuthenticationTimeout=10000
|
||||
|
||||
#Avoid HDCP timeouts - Possible in testing Keys only. May be used for debug purposes. All HDCP protocol timeouts will be avoided, excluding receiver timeouts will HDCP 2.2 Transmitter is working with HDCP 2.0 receiver.
|
||||
#Secure timestamp checking in Locality check and propagations will be avoided too.
|
||||
AvoidTimeouts=False
|
||||
|
||||
# Override the default TEE service logging mechanism. Any combination of True/False is valid.
|
||||
# The settings is secondary. Leave undefined to use platform defaults (recommended!)
|
||||
TeeNativeLogging=False
|
||||
TeeSerializedLogging=True
|
||||
|
||||
# Logger Queue number of slots
|
||||
# The value should be power of 2 that is greater than or equal to 128 (i.e 128, 256, 512 ...)
|
||||
# Default value 4096
|
||||
LoggerQueueSize=4096
|
||||
|
||||
# When IsSinkDualModeEnabled is True, the sink can switch between repeater and receiver
|
||||
# depending if it has populated topology beneath it. When IsSinkDualModeEnabled is False,
|
||||
# the sink will always identify itself as a repeater and if there is no devices beneath it,
|
||||
# it will have zero-size receiver ID list in its topology.
|
||||
# Default is True.
|
||||
IsSinkDualModeEnabled=True
|
||||
|
||||
# When SinkSendVPrimeMSB is True, Sink sends the most significant 128-bits of V' during upstream
|
||||
# propagation, as required by the HDCP specification. When SinkSendVPrimeMSB is False, Sink sends
|
||||
# the least significant 128-bits of V' during upstream propagation, inconsistently with the HDCP
|
||||
# specification, but without compromising security. This allows Sink to work against 3rd party
|
||||
# devices who violate the HDCP specification.
|
||||
# Default is False.
|
||||
SinkSendVPrimeMSB=False
|
||||
|
||||
# Size (in bytes) for hlos-ptr shared memory. Default: 2097152 (2MB)
|
||||
# When EArmHdcpBufferType::ARM_HDCP_BUFFER_TYPE_VIRTUAL_POINTER type is used for cipher buffers, an intermediate ION buffer should be allocated.
|
||||
# Size of the pre-allocated ION buffer is defined by SizeBytesForHlosPtrAsSharedMemRef value.
|
||||
# If SizeBytesForHlosPtrAsSharedMemRef is set to 0, cipher calls with EArmHdcpBufferType::ARM_HDCP_BUFFER_TYPE_VIRTUAL_POINTER type will fail.
|
||||
# When using Google WFD with libstagefright_hdcp.so this parameter should be set to 2 * maximum needed buffer size per encrypt operation and rounded up to 4096 bytes boundary
|
||||
SizeBytesForHlosPtrAsSharedMemRef=0
|
||||
|
||||
# Optional ION buffer parameters
|
||||
|
||||
# When SizeBytesForHlosPtrAsSharedMemRef > 0, the following parameters used for pre-allocated ION buffer allocation.
|
||||
# Note: HDCP test application require SizeBytesForHlosPtrAsSharedMemRef=2097152
|
||||
|
||||
# Non-secure ION heap ID. Default: 27 (27=ION_QSECOM_HEAP_ID)
|
||||
# NON_SECURE_ION_HEAP_ID=27
|
||||
|
||||
# Alignment in KB for non-secure buffer allocation using ION heap. Default: 4
|
||||
# NON_SECURE_ION_HEAP_ALIGN_KB=4
|
||||
|
||||
# Non-secure ION buffer allocation flags. Default: 0
|
||||
# NON_SECURE_ION_HEAP_FLAGS=0
|
||||
|
||||
# The following parameters used for secure ION buffers allocation (for test purpose only)
|
||||
|
||||
# Secure ION heap ID. Default: 9 (9=ION_SECURE_HEAP_ID)
|
||||
# TEST_SECURE_ION_HEAP_ID=9
|
||||
|
||||
# Alignment in KB for secure buffer allocation using ION heap. Default: 4
|
||||
# TEST_SECURE_ION_HEAP_ALIGN_KB=4
|
||||
|
||||
# Secure ION buffer allocation flags. Default: 2147745792 (2147745792 = 0x80040000 = (ION_SECURE | ION_FLAG_CP_BITSTREAM))
|
||||
# TEST_SECURE_ION_HEAP_FLAGS=2147745792
|
||||
|
||||
# TEST_SECURE_ION_HEAP_USE_TAG_MEM can be False (Default) or True
|
||||
# Set TEST_SECURE_ION_HEAP_USE_TAG_MEM to 1 to enforce qsee_tag_mem(AC_VM_CP_BITSTREAM, ...) call for each allocated ION secure buffer
|
||||
# TEST_SECURE_ION_HEAP_USE_TAG_MEM=False
|
||||
60
proprietary/vendor/etc/Oppo_QC_LTM_Commercial_2020_01_03.pfm
vendored
Normal file
60
proprietary/vendor/etc/Oppo_QC_LTM_Commercial_2020_01_03.pfm
vendored
Normal file
@@ -0,0 +1,60 @@
|
||||
{
|
||||
"licenseOEMIDs" : 81,
|
||||
"licenseFeaturesIds" : [ "1000" ],
|
||||
"licenseHardwareVersions" : [ "0x600D0100" ],
|
||||
"licenseeName" : "Oppo QC LTM Commercial License for SM7250"
|
||||
}
|
||||
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEbjCCAyagAwIBAgIUJNhapw0DMjAyMDAxMDUwMTQ0MzkwPQYJKoZIhvcNAQEK
|
||||
MDCgDTALBglghkgBZQMEAgGhGjAYBgkqhkiG9w0BAQgwCwYJYIZIAWUDBAIBogMC
|
||||
ASAwbzEkMCIGA1UECgwbUXVhbGNvbW0gVGVjaG5vbG9naWVzLCBJbmMuMSowKAYD
|
||||
VQQLDCFRdWFsY29tbSBDcnlwdG9ncmFwaGljIE9wZXJhdGlvbnMxGzAZBgNVBAMM
|
||||
EkNITFNFIFNpZ25pbmcgQ2VydDAgFw03MDAxMDEwMDAwMDFaGA85OTk5MTIzMTIz
|
||||
NTk1OVowgYYxMjAwBgNVBAMMKU9wcG8gUUMgTFRNIENvbW1lcmNpYWwgTGljZW5z
|
||||
ZSBmb3IgU003MjUwMSQwIgYDVQQKDBtRdWFsY29tbSBUZWNobm9sb2dpZXMsIElu
|
||||
Yy4xKjAoBgNVBAsMIVF1YWxjb21tIENyeXB0b2dyYXBoaWMgT3BlcmF0aW9uczCC
|
||||
ASAwCwYJKoZIhvcNAQEBA4IBDwAwggEKAoIBAQD/////////////////////////
|
||||
////////////////////////////////////////////////////////////////
|
||||
////////////////////////////////////////////////////////////////
|
||||
////////////////////////////////////////////////////////////////
|
||||
////////////////////////////////////////////////////////////////
|
||||
////////////////////////////////////////////////////////////AgMB
|
||||
AAGjgYkwgYYwHwYDVR0jBBgwFoAUhxTpNzJ+vbYo/DBqYCQQMNi9524wDAYDVR0T
|
||||
AQH/BAIwADAOBgNVHQ8BAf8EBAMCBaAwFQYJKwYBBAGLKQwBBAgAAAAAAAAD6DAW
|
||||
BgorBgEEAYspCwEBBAgAAAAAAAAAUTAWBgorBgEEAYspCwECBAgAAAAAAABgDTA9
|
||||
BgkqhkiG9w0BAQowMKANMAsGCWCGSAFlAwQCAaEaMBgGCSqGSIb3DQEBCDALBglg
|
||||
hkgBZQMEAgGiAwIBIAOCAQEAgbg543NHY3bTaJndZy22TPd2lcsaZ2c+FydCE3Vm
|
||||
Dsnf4CzIqBL9fBLBmft9x4uDlvAFUqv8LNHIom1CFomGQ5cVLmQZLzRuycmzL1y6
|
||||
D7Ax6SQkpQCvHvm0QAo5yvvt0BIXVUxuTBY/oMMDs9OdWP3gpOyYur/GYmcpFOjX
|
||||
dQr2p7qXunvyjDdCx4ssyxGske7HXkrMWSesuL2/8yTxLyO/ohCdSGqEVTzoryru
|
||||
J8IlpdTnErSbYb82QOlRmkApKfGtdPzuDrnbL+QB9NW5+q1f7atAdbm7xq0rrI0M
|
||||
lbwmSIhLhao3vXwI2iBjCdRynzUd7HLtxnULWSM/HRsKTQ==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIERTCCAv2gAwIBAgIVdqMEQ1j41p18D3AfzC1TDxRDgyKzMD0GCSqGSIb3DQEB
|
||||
CjAwoA0wCwYJYIZIAWUDBAIBoRowGAYJKoZIhvcNAQEIMAsGCWCGSAFlAwQCAaID
|
||||
AgEgMIGAMSQwIgYDVQQKDBtRdWFsY29tbSBUZWNobm9sb2dpZXMsIEluYy4xKjAo
|
||||
BgNVBAsMIVF1YWxjb21tIENyeXB0b2dyYXBoaWMgT3BlcmF0aW9uczEsMCoGA1UE
|
||||
AwwjRmVhdHVyZSBMaWNlbnNlIEF0dGVzdGF0aW9uIFJvb3QgQ0EwHhcNMTgxMjE0
|
||||
MDAwMDAxWhcNMjgxMjEzMjM1OTU5WjBvMSQwIgYDVQQKDBtRdWFsY29tbSBUZWNo
|
||||
bm9sb2dpZXMsIEluYy4xKjAoBgNVBAsMIVF1YWxjb21tIENyeXB0b2dyYXBoaWMg
|
||||
T3BlcmF0aW9uczEbMBkGA1UEAwwSQ0hMU0UgU2lnbmluZyBDZXJ0MIIBIjANBgkq
|
||||
hkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA7TyI/YJ2Mfipye29tcEW/jtWS/6sCgKK
|
||||
ogvkmeHBM07h3CwYDFBOBg+MqgqzNUpygj3wJ5ahLkG/HmxNg3CSXeIVlTt+cEZh
|
||||
ie0TW+s/rxi4ODLQ9v+UAoDszB0bk8gOd8HGs6CtKXCONDx/W3PSGn/+hTWpqE2G
|
||||
PsH4EqjI2uegyw4xMxO78iC9adn7fOGZFec1HaL4KmrWe+Vqg1KLIYx55ZrQFq5h
|
||||
/vP+hKlWSZP/HtY3knlQ2DcqickRAhz//C8wsxso+pjKdHHfDers0W02kzL0Cljk
|
||||
OpJedpnjd+JHLprysuEShJQ5vDIC48fsj5qwy315uyfpXOYcII2qOQIDAQABo2Yw
|
||||
ZDASBgNVHRMBAf8ECDAGAQH/AgEAMA4GA1UdDwEB/wQEAwIChDAdBgNVHQ4EFgQU
|
||||
hxTpNzJ+vbYo/DBqYCQQMNi9524wHwYDVR0jBBgwFoAU8kGYj4IIg0uJcAYVO7al
|
||||
Tpt5aAgwPQYJKoZIhvcNAQEKMDCgDTALBglghkgBZQMEAgGhGjAYBgkqhkiG9w0B
|
||||
AQgwCwYJYIZIAWUDBAIBogMCASADggEBAIlYDO7RnIdPDozvWshfuvQ3VawcjGSm
|
||||
KLJGp11MxM2Kd5SPTVT+uisLntJ6CY+FNdCc7zF2F9Va36rlIKYzqNBsmtOHF6Nf
|
||||
RBEssoJb5Tq81ZYDM5wsG+CMtS8wZ09M0ObkixzZFePidF/NIfPx1cj/FXEyosZ8
|
||||
lC0VXF8DG90waxrhY5W/ziBJTy7BTFNlgdMFw/wP+Wm+1PzqPESnDcgKr2D8lYGY
|
||||
kyP2AUNEmQkr/P2wqjYmFwUl8Fu6vyfXXLrBD3DN+MprdUP2d+fxr6kcVfjikzfU
|
||||
ZkHrvWqUb3z63I2NMPXnoDq3ZcN+1eE15JqfFk68Z6gNh3qjcFyaI0g=
|
||||
-----END CERTIFICATE-----
|
||||
62
proprietary/vendor/etc/Oppo_QC_LTM_Commercial_SM7225_2021_01_08.pfm
vendored
Normal file
62
proprietary/vendor/etc/Oppo_QC_LTM_Commercial_SM7225_2021_01_08.pfm
vendored
Normal file
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"licenseOEMIDs" : 81,
|
||||
"licenseFeaturesIds" : [ "1000" ],
|
||||
"licenseHardwareVersions" : [ "0x60120100" ],
|
||||
"licensePKHashes" : [ "0xA8F2DA95B44958141FCFF74F47469B145F57E2E6C1064046BF78EDFFDF20C150" ],
|
||||
"licenseeName" : "Oppo QC LTM Commercial License for SM7225"
|
||||
}
|
||||
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEpTCCA1mgAwIBAgIUSBVlNM1SzYm0xqW8AAABduKpdoQwQQYJKoZIhvcNAQEK
|
||||
MDSgDzANBglghkgBZQMEAgEFAKEcMBoGCSqGSIb3DQEBCDANBglghkgBZQMEAgEF
|
||||
AKIDAgEgMG8xJDAiBgNVBAoMG1F1YWxjb21tIFRlY2hub2xvZ2llcywgSW5jLjEq
|
||||
MCgGA1UECwwhUXVhbGNvbW0gQ3J5cHRvZ3JhcGhpYyBPcGVyYXRpb25zMRswGQYD
|
||||
VQQDDBJDSExTRSBTaWduaW5nIENlcnQwIBcNNzAwMTAxMDAwMDAxWhgPOTk5OTEy
|
||||
MzEyMzU5NTlaMIGGMTIwMAYDVQQDDClPcHBvIFFDIExUTSBDb21tZXJjaWFsIExp
|
||||
Y2Vuc2UgZm9yIFNNNzIyNTEkMCIGA1UECgwbUXVhbGNvbW0gVGVjaG5vbG9naWVz
|
||||
LCBJbmMuMSowKAYDVQQLDCFRdWFsY29tbSBDcnlwdG9ncmFwaGljIE9wZXJhdGlv
|
||||
bnMwggEgMAsGCSqGSIb3DQEBAQOCAQ8AMIIBCgKCAQEA////////////////////
|
||||
////////////////////////////////////////////////////////////////
|
||||
////////////////////////////////////////////////////////////////
|
||||
////////////////////////////////////////////////////////////////
|
||||
////////////////////////////////////////////////////////////////
|
||||
////////////////////////////////////////////////////////////////
|
||||
/wIDAQABo4G4MIG1MB8GA1UdIwQYMBaAFIcU6Tcyfr22KPwwamAkEDDYveduMAwG
|
||||
A1UdEwEB/wQCMAAwDgYDVR0PAQH/BAQDAgWgMBUGCSsGAQQBiykMAQQIAAAAAAAA
|
||||
A+gwFgYKKwYBBAGLKQsBAQQIAAAAAAAAAFEwFgYKKwYBBAGLKQsBAgQIAAAAAAAA
|
||||
YBIwLQYJKwYBBAGLKQwFBCCo8tqVtElYFB/P909HRpsUX1fi5sEGQEa/eO3/3yDB
|
||||
UDBBBgkqhkiG9w0BAQowNKAPMA0GCWCGSAFlAwQCAQUAoRwwGgYJKoZIhvcNAQEI
|
||||
MA0GCWCGSAFlAwQCAQUAogMCASADggEBAOplj1+05zKQ7LNveL8XIDTZEWxzZ1kj
|
||||
d6VX0wzK/FDf5esIQrhtFLunqo27JxnXaa7Q1j5caBlp/hiDWQKpc+0kWgCEhn+o
|
||||
nY8IkSdrqh8MTlF80eoS/82OVlj/d6rjftpYQWgpvsQiJwOEh2jbiDc7onRBVmMJ
|
||||
wSlDIRKdMeKxlDeLxAu4J95Gc1LuceZ6YBOPTcyKl/Q1Lt+5+BdfniomqTSf0fzW
|
||||
Fzrc3kDRAXLHo8EJxuZ7kjUJmU2FYZI23N+MmDIPE672AJ0S5Ib2ZpBfMo7Vi0EP
|
||||
pdE82U1cxwLwKquq0yZbnL1+nw1pJggaVX+pbBUNvEGBQZ/Gt1JyiAg=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIERTCCAv2gAwIBAgIVdqMEQ1j41p18D3AfzC1TDxRDgyKzMD0GCSqGSIb3DQEB
|
||||
CjAwoA0wCwYJYIZIAWUDBAIBoRowGAYJKoZIhvcNAQEIMAsGCWCGSAFlAwQCAaID
|
||||
AgEgMIGAMSQwIgYDVQQKDBtRdWFsY29tbSBUZWNobm9sb2dpZXMsIEluYy4xKjAo
|
||||
BgNVBAsMIVF1YWxjb21tIENyeXB0b2dyYXBoaWMgT3BlcmF0aW9uczEsMCoGA1UE
|
||||
AwwjRmVhdHVyZSBMaWNlbnNlIEF0dGVzdGF0aW9uIFJvb3QgQ0EwHhcNMTgxMjE0
|
||||
MDAwMDAxWhcNMjgxMjEzMjM1OTU5WjBvMSQwIgYDVQQKDBtRdWFsY29tbSBUZWNo
|
||||
bm9sb2dpZXMsIEluYy4xKjAoBgNVBAsMIVF1YWxjb21tIENyeXB0b2dyYXBoaWMg
|
||||
T3BlcmF0aW9uczEbMBkGA1UEAwwSQ0hMU0UgU2lnbmluZyBDZXJ0MIIBIjANBgkq
|
||||
hkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA7TyI/YJ2Mfipye29tcEW/jtWS/6sCgKK
|
||||
ogvkmeHBM07h3CwYDFBOBg+MqgqzNUpygj3wJ5ahLkG/HmxNg3CSXeIVlTt+cEZh
|
||||
ie0TW+s/rxi4ODLQ9v+UAoDszB0bk8gOd8HGs6CtKXCONDx/W3PSGn/+hTWpqE2G
|
||||
PsH4EqjI2uegyw4xMxO78iC9adn7fOGZFec1HaL4KmrWe+Vqg1KLIYx55ZrQFq5h
|
||||
/vP+hKlWSZP/HtY3knlQ2DcqickRAhz//C8wsxso+pjKdHHfDers0W02kzL0Cljk
|
||||
OpJedpnjd+JHLprysuEShJQ5vDIC48fsj5qwy315uyfpXOYcII2qOQIDAQABo2Yw
|
||||
ZDASBgNVHRMBAf8ECDAGAQH/AgEAMA4GA1UdDwEB/wQEAwIChDAdBgNVHQ4EFgQU
|
||||
hxTpNzJ+vbYo/DBqYCQQMNi9524wHwYDVR0jBBgwFoAU8kGYj4IIg0uJcAYVO7al
|
||||
Tpt5aAgwPQYJKoZIhvcNAQEKMDCgDTALBglghkgBZQMEAgGhGjAYBgkqhkiG9w0B
|
||||
AQgwCwYJYIZIAWUDBAIBogMCASADggEBAIlYDO7RnIdPDozvWshfuvQ3VawcjGSm
|
||||
KLJGp11MxM2Kd5SPTVT+uisLntJ6CY+FNdCc7zF2F9Va36rlIKYzqNBsmtOHF6Nf
|
||||
RBEssoJb5Tq81ZYDM5wsG+CMtS8wZ09M0ObkixzZFePidF/NIfPx1cj/FXEyosZ8
|
||||
lC0VXF8DG90waxrhY5W/ziBJTy7BTFNlgdMFw/wP+Wm+1PzqPESnDcgKr2D8lYGY
|
||||
kyP2AUNEmQkr/P2wqjYmFwUl8Fu6vyfXXLrBD3DN+MprdUP2d+fxr6kcVfjikzfU
|
||||
ZkHrvWqUb3z63I2NMPXnoDq3ZcN+1eE15JqfFk68Z6gNh3qjcFyaI0g=
|
||||
-----END CERTIFICATE-----
|
||||
BIN
proprietary/vendor/etc/acdbdata/adsp_avs_config.acdb
vendored
Normal file
BIN
proprietary/vendor/etc/acdbdata/adsp_avs_config.acdb
vendored
Normal file
Binary file not shown.
188
proprietary/vendor/etc/apdr.conf
vendored
Normal file
188
proprietary/vendor/etc/apdr.conf
vendored
Normal file
@@ -0,0 +1,188 @@
|
||||
# AP DR SENSOR Configuration file
|
||||
#
|
||||
# SENSOR_SERVICE options are one of below
|
||||
# accel,gyro,vehicle_accel,vehicle_gyro,pedometer,vehicle_odometry,accel_temp,
|
||||
# gyro_temp,baro,mag_calib,mag_uncalib,amd,rmd.
|
||||
#
|
||||
# SENSOR_PROVIDER options is one of -- default,native,ssc,samlite.
|
||||
#
|
||||
# SENSOR_RATE = 1~100 (Hz)
|
||||
#
|
||||
# SENSOR_SAMPLES = 1~N
|
||||
#
|
||||
# SENSOR_STATISTIC_ENABLED
|
||||
# bit 0: Diag Print Enabled
|
||||
# bit 1: Adb Print Enabled
|
||||
# SENSOR_STATISTIC_PRINT_COUNT
|
||||
# Skip Number of Print
|
||||
#
|
||||
# QDR_DYNAMIC_LOADING = 1~3
|
||||
# Configure QDR library to be loaded
|
||||
# 1: QDR3
|
||||
# 2: QDR2-GYRO
|
||||
# 3: QDR2-DWT
|
||||
#
|
||||
#
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR3 Configuration #
|
||||
# #
|
||||
# For QDR3, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
SENSOR_SERVICE = accel
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 10
|
||||
#
|
||||
SENSOR_SERVICE = vehicle_speed
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
SENSOR_SERVICE = gyro
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 10
|
||||
SENSOR_SAMPLES = 10
|
||||
#
|
||||
SENSOR_SERVICE = vehicle_gear
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 100
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
SENSOR_SERVICE = accel_temp
|
||||
SENSOR_PROVIDER = native
|
||||
SENSOR_RATE = 1
|
||||
SENSOR_SAMPLES = 1
|
||||
#
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
QDR_DYNAMIC_LOADING = 1
|
||||
##Specify CAN sensor type: Valid Options: 14(ODO), 2(ODO_DWT), 3(ODO_DWS)
|
||||
QDR_CAN_TYPE = 14
|
||||
##Reporting offset before PPS boundary
|
||||
QDR_REPORTING_OFFSET = 20
|
||||
#
|
||||
##QDR_ENABLE_QG shall be set as 1
|
||||
QDR_ENABLE_QG = 1
|
||||
#GEAR Optimisation
|
||||
QG_GEAR_ON_CHANGE=1
|
||||
#
|
||||
|
||||
##Vehicle Sensor Configuration (CAN data availability)
|
||||
##QDR_VEH_SENSOR_CONFIG:
|
||||
## 0: VEHICLE_SENSOR_PRESENT - Vehicle Sensor is available (DEFAULT)
|
||||
## 1: VEHICLE_SENSOR_OPTIONAL - Vehicle Sensor may or may not be present.
|
||||
#QDR_VEH_SENSOR_CONFIG = 0
|
||||
|
||||
##Select Wheel set (E.g.: Front two wheels, Rear two wheels OR All four wheels)
|
||||
##To be used for differential wheel tick OR speed service.
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as
|
||||
##ODO_DWS(3) or ODO_DWT(2).
|
||||
##Value "0": Use Front two wheels
|
||||
##Value "1": Use Rear two wheels
|
||||
##Value "2": Use All four wheels
|
||||
#QG_DRIVE_WHEEL_FW_RW_AW = 2
|
||||
##Max Wheel tick value above which wheel tick rolls over
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
|
||||
#QG_DWT_MAX_WHEEL_TICK_COUNT = 255.0
|
||||
##Configure Wheel constant for DWT based below equation
|
||||
##(2 * pi * WHEEL_RADIUS / Pulses Per revolution)
|
||||
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
|
||||
#QG_DWT_WHEEL_CONSTANT = 0.044
|
||||
#
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR2-DWT Configuration #
|
||||
# #
|
||||
# For QDR2-DWT, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_speed
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_dws
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gear
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#SENSOR_STATISTIC_ENABLED = 3
|
||||
#SENSOR_STATISTIC_PRINT_COUNT = 50
|
||||
#
|
||||
#GNSS_POS_STATISTIC_ENABLED = 3
|
||||
#GNSS_POS_STATISTIC_PRNTCNT = 10
|
||||
#GNSS_MSR_STATISTIC_ENABLED = 3
|
||||
#GNSS_MSR_STATISTIC_PRNTCNT = 10
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
#QDR_DYNAMIC_LOADING = 3
|
||||
##Enable/disable sensor data flashback feature
|
||||
#QDR_FLASHBACK_ENABLED = 0
|
||||
##Enable/disable sensor data batching feature
|
||||
#QDR_BATCHING_ENABLED = 0
|
||||
##Reporting offset before PPS boundary
|
||||
#QDR_REPORTING_OFFSET = 20
|
||||
##Sensor dispatch threshold declaration
|
||||
#QDR_SENSDISPATCH_MS = 30
|
||||
|
||||
|
||||
######################################
|
||||
# #
|
||||
# QDR2-GYRO Configuration #
|
||||
# #
|
||||
# For QDR2-GYRO, #
|
||||
# comment default configuration above#
|
||||
# and #
|
||||
# uncomment below configuration #
|
||||
# settings. #
|
||||
# #
|
||||
######################################
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_speed
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gyro
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
#SENSOR_SERVICE = vehicle_gear
|
||||
#SENSOR_PROVIDER = native
|
||||
#SENSOR_RATE = 100
|
||||
#SENSOR_SAMPLES = 1
|
||||
#
|
||||
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
|
||||
#QDR_DYNAMIC_LOADING = 2
|
||||
##Enable/disable sensor data flashback feature
|
||||
#QDR_FLASHBACK_ENABLED = 0
|
||||
##Enable/disable sensor data batching feature
|
||||
#QDR_BATCHING_ENABLED = 0
|
||||
##Reporting offset before PPS boundary
|
||||
#QDR_REPORTING_OFFSET = 20
|
||||
##Sensor dispatch threshold declaration
|
||||
#QDR_SENSDISPATCH_MS = 30
|
||||
#
|
||||
551
proprietary/vendor/etc/cacert_location.pem
vendored
Normal file
551
proprietary/vendor/etc/cacert_location.pem
vendored
Normal file
@@ -0,0 +1,551 @@
|
||||
COG
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDeTCCAmGgAwIBAgIJAKnFNzqHIGkmMA0GCSqGSIb3DQEBBQUAMGkxFzAVBgNV
|
||||
BAoTDlFVQUxDT01NLCBJbmMuMScwJQYDVQQLEx5DcnlwdG9ncmFwaGljIE9wZXJh
|
||||
dGlvbnMgR3JvdXAxJTAjBgNVBAMTHFhUUkEgQWRtbmluaXN0cmF0aXZlIFJvb3Qg
|
||||
djEwHhcNMTEwMzI0MjAwMzQ3WhcNMjYwMzIwMjAwMzQ3WjBpMRcwFQYDVQQKEw5R
|
||||
VUFMQ09NTSwgSW5jLjEnMCUGA1UECxMeQ3J5cHRvZ3JhcGhpYyBPcGVyYXRpb25z
|
||||
IEdyb3VwMSUwIwYDVQQDExxYVFJBIEFkbW5pbmlzdHJhdGl2ZSBSb290IHYxMIIB
|
||||
IDANBgkqhkiG9w0BAQEFAAOCAQ0AMIIBCAKCAQEAp97dbUn5CzvikZSpHOVkevx7
|
||||
NRAE5OPlyU3rbO1xCHextKpgpRCmGEXmpifN33Q4atSsf0QIoPiq9WtbYZsMU8DZ
|
||||
YrLuSFH6P9O9fVyqM0sZZpn97frLD7T+/n7r+PqSdoRJnrTD1kaP1iVJuZSaW+sc
|
||||
x8TIzCJDMf6qWP0zhizqIdFhb4EtgBkRkExUxsQ0xEmBETrbydSEo90be6wLkRgp
|
||||
AtU208ZKCGrGcNKCNSp9TDkwLn0V408HkQ+iNw4xWpNURWGEoN3h8hOz+O3M6L2S
|
||||
RxH21P4CnLj0Ag7FqA35JdUtoeSt8UUJnv9kgBh3X0r9oc20+uwlZTOuZW6SkQIB
|
||||
A6MmMCQwEgYDVR0TAQH/BAgwBgEB/wIBATAOBgNVHQ8BAf8EBAMCAYYwDQYJKoZI
|
||||
hvcNAQEFBQADggEBADkdmsCBpZG44cJafBzcp7zIM57/fme8LuxbF0f50CHH2FHR
|
||||
P+HOLZARqHBFID+D8+hIDu3FQrtZg/SRscO+dvGjdILcp77S0Qne1K9TLu16aMBg
|
||||
wgWmr4mIRG/upqF93qVBzO6ffGR6uHAE7XtP/sRcLG34TmIgTtXEWhDSJHvcjlcf
|
||||
kF7+kMLHUrRcj20MTggKkWkDkCB0jyG9rZB9s127mEZjEMkEeoXi33NvV8qO2ChE
|
||||
yKPPlpKQT7tXghS0WfK73fSNSmWaTmUlL8N9Rb50uA0rZdarNDYI7jqJSlGFgE2+
|
||||
usHoeIDFQK2C6Zha3diWlbs8F3foMXKIfFVhvxo=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
Entrust.net Secure Server Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIE2DCCBEGgAwIBAgIEN0rSQzANBgkqhkiG9w0BAQUFADCBwzELMAkGA1UE
|
||||
BhMCVVMxFDASBgNVBAoTC0VudHJ1c3QubmV0MTswOQYDVQQLEzJ3d3cuZW50
|
||||
cnVzdC5uZXQvQ1BTIGluY29ycC4gYnkgcmVmLiAobGltaXRzIGxpYWIuKTEl
|
||||
MCMGA1UECxMcKGMpIDE5OTkgRW50cnVzdC5uZXQgTGltaXRlZDE6MDgGA1UE
|
||||
AxMxRW50cnVzdC5uZXQgU2VjdXJlIFNlcnZlciBDZXJ0aWZpY2F0aW9uIEF1
|
||||
dGhvcml0eTAeFw05OTA1MjUxNjA5NDBaFw0xOTA1MjUxNjM5NDBaMIHDMQsw
|
||||
CQYDVQQGEwJVUzEUMBIGA1UEChMLRW50cnVzdC5uZXQxOzA5BgNVBAsTMnd3
|
||||
dy5lbnRydXN0Lm5ldC9DUFMgaW5jb3JwLiBieSByZWYuIChsaW1pdHMgbGlh
|
||||
Yi4pMSUwIwYDVQQLExwoYykgMTk5OSBFbnRydXN0Lm5ldCBMaW1pdGVkMTow
|
||||
OAYDVQQDEzFFbnRydXN0Lm5ldCBTZWN1cmUgU2VydmVyIENlcnRpZmljYXRp
|
||||
b24gQXV0aG9yaXR5MIGdMA0GCSqGSIb3DQEBAQUAA4GLADCBhwKBgQDNKIM0
|
||||
VBuJ8w+vN5Ex/68xYMmo6LIQaO2f55M28Qpku0f1BBc/I0dNxScZgSYMVHIN
|
||||
iC3ZH5oSn7yzcdOAGT9HZnuMNSjSuQrfJNqc1lB5gXpa0zf3wkrYKZImZNHk
|
||||
mGw6AIr1NJtl+O3jEP/9uElY3KDegjlrgbEWGWG5VLbmQwIBA6OCAdcwggHT
|
||||
MBEGCWCGSAGG+EIBAQQEAwIABzCCARkGA1UdHwSCARAwggEMMIHeoIHboIHY
|
||||
pIHVMIHSMQswCQYDVQQGEwJVUzEUMBIGA1UEChMLRW50cnVzdC5uZXQxOzA5
|
||||
BgNVBAsTMnd3dy5lbnRydXN0Lm5ldC9DUFMgaW5jb3JwLiBieSByZWYuIChs
|
||||
aW1pdHMgbGlhYi4pMSUwIwYDVQQLExwoYykgMTk5OSBFbnRydXN0Lm5ldCBM
|
||||
aW1pdGVkMTowOAYDVQQDEzFFbnRydXN0Lm5ldCBTZWN1cmUgU2VydmVyIENl
|
||||
cnRpZmljYXRpb24gQXV0aG9yaXR5MQ0wCwYDVQQDEwRDUkwxMCmgJ6AlhiNo
|
||||
dHRwOi8vd3d3LmVudHJ1c3QubmV0L0NSTC9uZXQxLmNybDArBgNVHRAEJDAi
|
||||
gA8xOTk5MDUyNTE2MDk0MFqBDzIwMTkwNTI1MTYwOTQwWjALBgNVHQ8EBAMC
|
||||
AQYwHwYDVR0jBBgwFoAU8BdiE1U9s/8KAGv7UISX8+1i0BowHQYDVR0OBBYE
|
||||
FPAXYhNVPbP/CgBr+1CEl/PtYtAaMAwGA1UdEwQFMAMBAf8wGQYJKoZIhvZ9
|
||||
B0EABAwwChsEVjQuMAMCBJAwDQYJKoZIhvcNAQEFBQADgYEAkNwwAvpkdMKn
|
||||
CqV8IY00F6j7Rw7/JXyNEwr75Ji174z4xRAN95K+8cPV1ZVqBLssziY2Zcgx
|
||||
xufuP+NXdYR6Ee9GTxj005i7qIcyunL2POI9n9cd2cNgQ4xYDiKWL2KjLB+6
|
||||
rQXvqzJ4h6BUcxm1XAX5Uj5tLUUL9wqT6u0G+bI=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
Entrust Certification Authority (2048)
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEKjCCAxKgAwIBAgIEOGPe+DANBgkqhkiG9w0BAQUFADCBtDEUMBIGA1UEChMLRW50cnVzdC5u
|
||||
ZXQxQDA+BgNVBAsUN3d3dy5lbnRydXN0Lm5ldC9DUFNfMjA0OCBpbmNvcnAuIGJ5IHJlZi4gKGxp
|
||||
bWl0cyBsaWFiLikxJTAjBgNVBAsTHChjKSAxOTk5IEVudHJ1c3QubmV0IExpbWl0ZWQxMzAxBgNV
|
||||
BAMTKkVudHJ1c3QubmV0IENlcnRpZmljYXRpb24gQXV0aG9yaXR5ICgyMDQ4KTAeFw05OTEyMjQx
|
||||
NzUwNTFaFw0yOTA3MjQxNDE1MTJaMIG0MRQwEgYDVQQKEwtFbnRydXN0Lm5ldDFAMD4GA1UECxQ3
|
||||
d3d3LmVudHJ1c3QubmV0L0NQU18yMDQ4IGluY29ycC4gYnkgcmVmLiAobGltaXRzIGxpYWIuKTEl
|
||||
MCMGA1UECxMcKGMpIDE5OTkgRW50cnVzdC5uZXQgTGltaXRlZDEzMDEGA1UEAxMqRW50cnVzdC5u
|
||||
ZXQgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgKDIwNDgpMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8A
|
||||
MIIBCgKCAQEArU1LqRKGsuqjIAcVFmQqK0vRvwtKTY7tgHalZ7d4QMBzQshowNtTK91euHaYNZOL
|
||||
Gp18EzoOH1u3Hs/lJBQesYGpjX24zGtLA/ECDNyrpUAkAH90lKGdCCmziAv1h3edVc3kw37XamSr
|
||||
hRSGlVuXMlBvPci6Zgzj/L24ScF2iUkZ/cCovYmjZy/Gn7xxGWC4LeksyZB2ZnuU4q941mVTXTzW
|
||||
nLLPKQP5L6RQstRIzgUyVYr9smRMDuSYB3Xbf9+5CFVghTAp+XtIpGmG4zU/HoZdenoVve8AjhUi
|
||||
VBcAkCaTvA5JaJG/+EfTnZVCwQ5N328mz8MYIWJmQ3DW1cAH4QIDAQABo0IwQDAOBgNVHQ8BAf8E
|
||||
BAMCAQYwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUVeSB0RGAvtiJuQijMfmhJAkWuXAwDQYJ
|
||||
KoZIhvcNAQEFBQADggEBADubj1abMOdTmXx6eadNl9cZlZD7Bh/KM3xGY4+WZiT6QBshJ8rmcnPy
|
||||
T/4xmf3IDExoU8aAghOY+rat2l098c5u9hURlIIM7j+VrxGrD9cv3h8Dj1csHsm7mhpElesYT6Yf
|
||||
zX1XEC+bBAlahLVu2B064dae0Wx5XnkcFMXj0EyTO2U87d89vqbllRrDtRnDvV5bu/8j72gZyxKT
|
||||
J1wDLW8w0B62GqzeWvfRqqgnpv55gcR5mTNXuhKwqeBCbJPKVt7+bYQLCIt+jerXmCHG8+c8eS9e
|
||||
nNFMFY3h7CI3zJpDC5fcgJCNs2ebb0gIFVbPv/ErfF6adulZkMV8gzURZVE=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
Entrust Root Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEkTCCA3mgAwIBAgIERWtQVDANBgkqhkiG9w0BAQUFADCBsDELMAkGA1UEBhMC
|
||||
VVMxFjAUBgNVBAoTDUVudHJ1c3QsIEluYy4xOTA3BgNVBAsTMHd3dy5lbnRydXN0
|
||||
Lm5ldC9DUFMgaXMgaW5jb3Jwb3JhdGVkIGJ5IHJlZmVyZW5jZTEfMB0GA1UECxMW
|
||||
KGMpIDIwMDYgRW50cnVzdCwgSW5jLjEtMCsGA1UEAxMkRW50cnVzdCBSb290IENl
|
||||
cnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTA2MTEyNzIwMjM0MloXDTI2MTEyNzIw
|
||||
NTM0MlowgbAxCzAJBgNVBAYTAlVTMRYwFAYDVQQKEw1FbnRydXN0LCBJbmMuMTkw
|
||||
NwYDVQQLEzB3d3cuZW50cnVzdC5uZXQvQ1BTIGlzIGluY29ycG9yYXRlZCBieSBy
|
||||
ZWZlcmVuY2UxHzAdBgNVBAsTFihjKSAyMDA2IEVudHJ1c3QsIEluYy4xLTArBgNV
|
||||
BAMTJEVudHJ1c3QgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCCASIwDQYJ
|
||||
KoZIhvcNAQEBBQADggEPADCCAQoCggEBALaVtkNC+sZtKm9I35RMOVcF7sN5EUFo
|
||||
Nu3s/poBj6E4KPz3EEZmLk0eGrEaTsbRwJWIsMn/MYszA9u3g3s+IIRe7bJWKKf4
|
||||
4LlAcTfFy0cOlypowCKVYhXbR9n10Cv/gkvJrT7eTNuQgFA/CYqEAOwwCj0Yzfv9
|
||||
KlmaI5UXLEWeH25DeW0MXJj+SKfFI0dcXv1u5x609mhF0YaDW6KKjbHjKYD+JXGI
|
||||
rb68j6xSlkuqUY3kEzEZ6E5Nn9uss2rVvDlUccp6en+Q3X0dgNmBu1kmwhH+5pPi
|
||||
94DkZfs0Nw4pgHBNrziGLp5/V6+eF67rHMsoIV+2HNjnogQi+dPa2MsCAwEAAaOB
|
||||
sDCBrTAOBgNVHQ8BAf8EBAMCAQYwDwYDVR0TAQH/BAUwAwEB/zArBgNVHRAEJDAi
|
||||
gA8yMDA2MTEyNzIwMjM0MlqBDzIwMjYxMTI3MjA1MzQyWjAfBgNVHSMEGDAWgBRo
|
||||
kORnpKZTgMeGZqTx90tD+4S9bTAdBgNVHQ4EFgQUaJDkZ6SmU4DHhmak8fdLQ/uE
|
||||
vW0wHQYJKoZIhvZ9B0EABBAwDhsIVjcuMTo0LjADAgSQMA0GCSqGSIb3DQEBBQUA
|
||||
A4IBAQCT1DCw1wMgKtD5Y+iRDAUgqV8ZyntyTtSx29CW+1RaGSwMCPeyvIWonX9t
|
||||
O1KzKtvn1ISMY/YPyyYBkVBs9F8U4pN0wBOeMDpQ47RgxRzwIkSNcUesyBrJ6Zua
|
||||
AGAT/3B+XxFNSRuzFVJ7yVTav52Vr2ua2J7p8eRDjeIRRDq/r72DQnNSi6q7pynP
|
||||
9WQcCk3RvKqsnyrQ/39/2n3qse0wJcGE2jTSW3iDVuycNsMm4hH2Z0kdkquM++v/
|
||||
eu6FSqdQgPCnXEqULl8FmTxSQeDNtGPPAUO6nIPcj2A781q0tHuu2guQOHXvgR1m
|
||||
0vdXcDazv/wor3ElhVsT/h5/WrQ8
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
|
||||
Entrust Root Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEPjCCAyagAwIBAgIESlOMKDANBgkqhkiG9w0BAQsFADCBvjELMAkGA1UEBhMC
|
||||
VVMxFjAUBgNVBAoTDUVudHJ1c3QsIEluYy4xKDAmBgNVBAsTH1NlZSB3d3cuZW50
|
||||
cnVzdC5uZXQvbGVnYWwtdGVybXMxOTA3BgNVBAsTMChjKSAyMDA5IEVudHJ1c3Qs
|
||||
IEluYy4gLSBmb3IgYXV0aG9yaXplZCB1c2Ugb25seTEyMDAGA1UEAxMpRW50cnVz
|
||||
dCBSb290IENlcnRpZmljYXRpb24gQXV0aG9yaXR5IC0gRzIwHhcNMDkwNzA3MTcy
|
||||
NTU0WhcNMzAxMjA3MTc1NTU0WjCBvjELMAkGA1UEBhMCVVMxFjAUBgNVBAoTDUVu
|
||||
dHJ1c3QsIEluYy4xKDAmBgNVBAsTH1NlZSB3d3cuZW50cnVzdC5uZXQvbGVnYWwt
|
||||
dGVybXMxOTA3BgNVBAsTMChjKSAyMDA5IEVudHJ1c3QsIEluYy4gLSBmb3IgYXV0
|
||||
aG9yaXplZCB1c2Ugb25seTEyMDAGA1UEAxMpRW50cnVzdCBSb290IENlcnRpZmlj
|
||||
YXRpb24gQXV0aG9yaXR5IC0gRzIwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEK
|
||||
AoIBAQC6hLZy254Ma+KZ6TABp3bqMriVQRrJ2mFOWHLP/vaCeb9zYQYKpSfYs1/T
|
||||
RU4cctZOMvJyig/3gxnQaoCAAEUesMfnmr8SVycco2gvCoe9amsOXmXzHHfV1IWN
|
||||
cCG0szLni6LVhjkCsbjSR87kyUnEO6fe+1R9V77w6G7CebI6C1XiUJgWMhNcL3hW
|
||||
wcKUs/Ja5CeanyTXxuzQmyWC48zCxEXFjJd6BmsqEZ+pCm5IO2/b1BEZQvePB7/1
|
||||
U1+cPvQXLOZprE4yTGJ36rfo5bs0vBmLrpxR57d+tVOxMyLlbc9wPBr64ptntoP0
|
||||
jaWvYkxN4FisZDQSA/i2jZRjJKRxAgMBAAGjQjBAMA4GA1UdDwEB/wQEAwIBBjAP
|
||||
BgNVHRMBAf8EBTADAQH/MB0GA1UdDgQWBBRqciZ60B7vfec7aVHUbI2fkBJmqzAN
|
||||
BgkqhkiG9w0BAQsFAAOCAQEAeZ8dlsa2eT8ijYfThwMEYGprmi5ZiXMRrEPR9RP/
|
||||
jTkrwPK9T3CMqS/qF8QLVJ7UG5aYMzyorWKiAHarWWluBh1+xLlEjZivEtRh2woZ
|
||||
Rkfz6/djwUAFQKXSt/S1mja/qYh2iARVBCuch38aNzx+LaUa2NSJXsq9rD1s2G2v
|
||||
1fN2D807iDginWyTmsQ9v4IbZT+mD12q/OWyFcq1rca8PdCE6OoGcrBNOTJ4vz4R
|
||||
nAuknZoh8/CbCzB428Hch0P+vGOaysXCHMnHjf87ElgI5rY97HosTvuDls4MPGmH
|
||||
VHOkc8KT/1EQrBVUAdj8BbGJoX90g5pJ19xOe4pIb4tF9g==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
|
||||
DigiCert Assured ID Root CA
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDtzCCAp+gAwIBAgIQDOfg5RfYRv6P5WD8G/AwOTANBgkqhkiG9w0BAQUFADBl
|
||||
MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
|
||||
d3cuZGlnaWNlcnQuY29tMSQwIgYDVQQDExtEaWdpQ2VydCBBc3N1cmVkIElEIFJv
|
||||
b3QgQ0EwHhcNMDYxMTEwMDAwMDAwWhcNMzExMTEwMDAwMDAwWjBlMQswCQYDVQQG
|
||||
EwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3d3cuZGlnaWNl
|
||||
cnQuY29tMSQwIgYDVQQDExtEaWdpQ2VydCBBc3N1cmVkIElEIFJvb3QgQ0EwggEi
|
||||
MA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCtDhXO5EOAXLGH87dg+XESpa7c
|
||||
JpSIqvTO9SA5KFhgDPiA2qkVlTJhPLWxKISKityfCgyDF3qPkKyK53lTXDGEKvYP
|
||||
mDI2dsze3Tyoou9q+yHyUmHfnyDXH+Kx2f4YZNISW1/5WBg1vEfNoTb5a3/UsDg+
|
||||
wRvDjDPZ2C8Y/igPs6eD1sNuRMBhNZYW/lmci3Zt1/GiSw0r/wty2p5g0I6QNcZ4
|
||||
VYcgoc/lbQrISXwxmDNsIumH0DJaoroTghHtORedmTpyoeb6pNnVFzF1roV9Iq4/
|
||||
AUaG9ih5yLHa5FcXxH4cDrC0kqZWs72yl+2qp/C3xag/lRbQ/6GW6whfGHdPAgMB
|
||||
AAGjYzBhMA4GA1UdDwEB/wQEAwIBhjAPBgNVHRMBAf8EBTADAQH/MB0GA1UdDgQW
|
||||
BBRF66Kv9JLLgjEtUYunpyGd823IDzAfBgNVHSMEGDAWgBRF66Kv9JLLgjEtUYun
|
||||
pyGd823IDzANBgkqhkiG9w0BAQUFAAOCAQEAog683+Lt8ONyc3pklL/3cmbYMuRC
|
||||
dWKuh+vy1dneVrOfzM4UKLkNl2BcEkxY5NM9g0lFWJc1aRqoR+pWxnmrEthngYTf
|
||||
fwk8lOa4JiwgvT2zKIn3X/8i4peEH+ll74fg38FnSbNd67IJKusm7Xi+fT8r87cm
|
||||
NW1fiQG2SVufAQWbqz0lwcy2f8Lxb4bG+mRo64EtlOtCt/qMHt1i8b5QZ7dsvfPx
|
||||
H2sMNgcWfzd8qVttevESRmCD1ycEvkvOl77DZypoEd+A5wwzZr8TDRRu838fYxAe
|
||||
+o0bJW1sj6W3YQGx0qMmoRBxna3iw/nDmVG3KwcIzi7mULKn+gpFL6Lw8g==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
DigiCert Global Root CA
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDrzCCApegAwIBAgIQCDvgVpBCRrGhdWrJWZHHSjANBgkqhkiG9w0BAQUFADBh
|
||||
MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
|
||||
d3cuZGlnaWNlcnQuY29tMSAwHgYDVQQDExdEaWdpQ2VydCBHbG9iYWwgUm9vdCBD
|
||||
QTAeFw0wNjExMTAwMDAwMDBaFw0zMTExMTAwMDAwMDBaMGExCzAJBgNVBAYTAlVT
|
||||
MRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMxGTAXBgNVBAsTEHd3dy5kaWdpY2VydC5j
|
||||
b20xIDAeBgNVBAMTF0RpZ2lDZXJ0IEdsb2JhbCBSb290IENBMIIBIjANBgkqhkiG
|
||||
9w0BAQEFAAOCAQ8AMIIBCgKCAQEA4jvhEXLeqKTTo1eqUKKPC3eQyaKl7hLOllsB
|
||||
CSDMAZOnTjC3U/dDxGkAV53ijSLdhwZAAIEJzs4bg7/fzTtxRuLWZscFs3YnFo97
|
||||
nh6Vfe63SKMI2tavegw5BmV/Sl0fvBf4q77uKNd0f3p4mVmFaG5cIzJLv07A6Fpt
|
||||
43C/dxC//AH2hdmoRBBYMql1GNXRor5H4idq9Joz+EkIYIvUX7Q6hL+hqkpMfT7P
|
||||
T19sdl6gSzeRntwi5m3OFBqOasv+zbMUZBfHWymeMr/y7vrTC0LUq7dBMtoM1O/4
|
||||
gdW7jVg/tRvoSSiicNoxBN33shbyTApOB6jtSj1etX+jkMOvJwIDAQABo2MwYTAO
|
||||
BgNVHQ8BAf8EBAMCAYYwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUA95QNVbR
|
||||
TLtm8KPiGxvDl7I90VUwHwYDVR0jBBgwFoAUA95QNVbRTLtm8KPiGxvDl7I90VUw
|
||||
DQYJKoZIhvcNAQEFBQADggEBAMucN6pIExIK+t1EnE9SsPTfrgT1eXkIoyQY/Esr
|
||||
hMAtudXH/vTBH1jLuG2cenTnmCmrEbXjcKChzUyImZOMkXDiqw8cvpOp/2PV5Adg
|
||||
06O/nVsJ8dWO41P0jmP6P6fbtGbfYmbW0W5BjfIttep3Sp+dWOIrWcBAI+0tKIJF
|
||||
PnlUkiaY4IBIqDfv8NZ5YBberOgOzW6sRBc4L0na4UU+Krk2U886UAb3LujEV0ls
|
||||
YSEY1QSteDwsOoBrp+uvFRTp2InBuThs4pFsiv9kuXclVzDAGySj4dzp30d8tbQk
|
||||
CAUw7C29C79Fv1C5qfPrmAESrciIxpg0X40KPMbp1ZWVbd4=
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
DigiCert High Assurance EV Root CA
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDxTCCAq2gAwIBAgIQAqxcJmoLQJuPC3nyrkYldzANBgkqhkiG9w0BAQUFADBs
|
||||
MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
|
||||
d3cuZGlnaWNlcnQuY29tMSswKQYDVQQDEyJEaWdpQ2VydCBIaWdoIEFzc3VyYW5j
|
||||
ZSBFViBSb290IENBMB4XDTA2MTExMDAwMDAwMFoXDTMxMTExMDAwMDAwMFowbDEL
|
||||
MAkGA1UEBhMCVVMxFTATBgNVBAoTDERpZ2lDZXJ0IEluYzEZMBcGA1UECxMQd3d3
|
||||
LmRpZ2ljZXJ0LmNvbTErMCkGA1UEAxMiRGlnaUNlcnQgSGlnaCBBc3N1cmFuY2Ug
|
||||
RVYgUm9vdCBDQTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMbM5XPm
|
||||
+9S75S0tMqbf5YE/yc0lSbZxKsPVlDRnogocsF9ppkCxxLeyj9CYpKlBWTrT3JTW
|
||||
PNt0OKRKzE0lgvdKpVMSOO7zSW1xkX5jtqumX8OkhPhPYlG++MXs2ziS4wblCJEM
|
||||
xChBVfvLWokVfnHoNb9Ncgk9vjo4UFt3MRuNs8ckRZqnrG0AFFoEt7oT61EKmEFB
|
||||
Ik5lYYeBQVCmeVyJ3hlKV9Uu5l0cUyx+mM0aBhakaHPQNAQTXKFx01p8VdteZOE3
|
||||
hzBWBOURtCmAEvF5OYiiAhF8J2a3iLd48soKqDirCmTCv2ZdlYTBoSUeh10aUAsg
|
||||
EsxBu24LUTi4S8sCAwEAAaNjMGEwDgYDVR0PAQH/BAQDAgGGMA8GA1UdEwEB/wQF
|
||||
MAMBAf8wHQYDVR0OBBYEFLE+w2kD+L9HAdSYJhoIAu9jZCvDMB8GA1UdIwQYMBaA
|
||||
FLE+w2kD+L9HAdSYJhoIAu9jZCvDMA0GCSqGSIb3DQEBBQUAA4IBAQAcGgaX3Nec
|
||||
nzyIZgYIVyHbIUf4KmeqvxgydkAQV8GK83rZEWWONfqe/EW1ntlMMUu4kehDLI6z
|
||||
eM7b41N5cdblIZQB2lWHmiRk9opmzN6cN82oNLFpmyPInngiK3BD41VHMWEZ71jF
|
||||
hS9OMPagMRYjyOfiZRYzy78aG6A9+MpeizGLYAiJLQwGXFK3xPkKmNEVX58Svnw2
|
||||
Yzi9RKR/5CYrCsSXaQ3pjOLAEFe4yHYSkVXySGnYvCoCWw9E1CAx2/S6cCZdkGCe
|
||||
vEsXCS+0yx5DaMkHJ8HSXPfqIbloEpw8nL+e/IBcm2PN7EeqJSdnoDfzAIJ9VNep
|
||||
+OkuE6N36B9K
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 1 Public Primary Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIICPTCCAaYCEQDNun9W8N/kvFT+IqyzcqpVMA0GCSqGSIb3DQEBAgUAMF8xCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xh
|
||||
c3MgMSBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAeFw05
|
||||
NjAxMjkwMDAwMDBaFw0yODA4MDEyMzU5NTlaMF8xCzAJBgNVBAYTAlVTMRcwFQYD
|
||||
VQQKEw5WZXJpU2lnbiwgSW5jLjE3MDUGA1UECxMuQ2xhc3MgMSBQdWJsaWMgUHJp
|
||||
bWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCBnzANBgkqhkiG9w0BAQEFAAOB
|
||||
jQAwgYkCgYEA5Rm/baNWYS2ZSHH2Z965jeu3noaACpEO+jglr0aIguVzqKCbJF0N
|
||||
H8xlbgyw0FaEGIeaBpsQoXPftFg5a27B9hXVqKg/qhIGjTGsf7A01480Z4gJzRQR
|
||||
4k5FVmkfeAKA2txHkSm7NsljXMXg1y2He6G3MrB7MLoqLzGq7qNn2tsCAwEAATAN
|
||||
BgkqhkiG9w0BAQIFAAOBgQBMP7iLxmjf7kMzDl3ppssHhE16M/+SG/Q2rdiVIjZo
|
||||
EWx8QszznC7EBz8UsA9P/5CSdvnivErpj82ggAr3xSnxgiJduLHdgSOjeyUVRjB5
|
||||
FvjqBUuUfx3CHMjjt/QQQDwTw18fU+hI5Ia0e6E1sHslurjTjqs/OJ0ANACY89Fx
|
||||
lA==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 2 Public Primary Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIICPDCCAaUCEC0b/EoXjaOR6+f/9YtFvgswDQYJKoZIhvcNAQECBQAwXzELMAkG
|
||||
A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz
|
||||
cyAyIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2
|
||||
MDEyOTAwMDAwMFoXDTI4MDgwMTIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV
|
||||
BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAyIFB1YmxpYyBQcmlt
|
||||
YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN
|
||||
ADCBiQKBgQC2WoujDWojg4BrzzmH9CETMwZMJaLtVRKXxaeAufqDwSCg+i8VDXyh
|
||||
YGt+eSz6Bg86rvYbb7HS/y8oUl+DfUvEerf4Zh+AVPy3wo5ZShRXRtGak75BkQO7
|
||||
FYCTXOvnzAhsPz6zSvz/S2wj1VCCJkQZjiPDceoZJEcEnnW/yKYAHwIDAQABMA0G
|
||||
CSqGSIb3DQEBAgUAA4GBAIobK/o5wXTXXtgZZKJYSi034DNHD6zt96rbHuSLBlxg
|
||||
J8pFUs4W7z8GZOeUaHxgMxURaa+dYo2jA1Rrpr7l7gUYYAS/QoD90KioHgE796Nc
|
||||
r6Pc5iaAIzy4RHT3Cq5Ji2F4zCS/iIqnDupzGUH9TQPwiNHleI2lKk/2lw0Xd8rY
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIICPDCCAaUCEDyRMcsf9tAbDpq40ES/Er4wDQYJKoZIhvcNAQEFBQAwXzELMAkG
|
||||
A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFz
|
||||
cyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTk2
|
||||
MDEyOTAwMDAwMFoXDTI4MDgwMjIzNTk1OVowXzELMAkGA1UEBhMCVVMxFzAVBgNV
|
||||
BAoTDlZlcmlTaWduLCBJbmMuMTcwNQYDVQQLEy5DbGFzcyAzIFB1YmxpYyBQcmlt
|
||||
YXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIGfMA0GCSqGSIb3DQEBAQUAA4GN
|
||||
ADCBiQKBgQDJXFme8huKARS0EN8EQNvjV69qRUCPhAwL0TPZ2RHP7gJYHyX3KqhE
|
||||
BarsAx94f56TuZoAqiN91qyFomNFx3InzPRMxnVx0jnvT0Lwdd8KkMaOIG+YD/is
|
||||
I19wKTakyYbnsZogy1Olhec9vn2a/iRFM9x2Fe0PonFkTGUugWhFpwIDAQABMA0G
|
||||
CSqGSIb3DQEBBQUAA4GBABByUqkFFBkyCEHwxWsKzH4PIRnN5GfcX6kb5sroc50i
|
||||
2JhucwNhkcV8sEVAbkSdjbCxlnRhLQ2pRdKkkirWmnWXbj9T/UWZYB2oK0z5XqcJ
|
||||
2HUw19JlYD1n1khVdWk/kfVIC0dpImmClr7JyDiGSnoscxlIaU5rfGW/D/xwzoiQ
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 1 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAjCCAmsCEEzH6qqYPnHTkxD4PTqJkZIwDQYJKoZIhvcNAQEFBQAwgcExCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xh
|
||||
c3MgMSBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcy
|
||||
MTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3Jp
|
||||
emVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMB4X
|
||||
DTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVTMRcw
|
||||
FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgMSBQdWJsaWMg
|
||||
UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEo
|
||||
YykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5
|
||||
MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEB
|
||||
AQUAA4GNADCBiQKBgQCq0Lq+Fi24g9TK0g+8djHKlNgdk4xWArzZbxpvUjZudVYK
|
||||
VdPfQ4chEWWKfo+9Id5rMj8bhDSVBZ1BNeuS65bdqlk/AVNtmU/t5eIqWpDBucSm
|
||||
Fc/IReumXY6cPvBkJHalzasab7bYe1FhbqZ/h8jit+U03EGI6glAvnOSPWvndQID
|
||||
AQABMA0GCSqGSIb3DQEBBQUAA4GBAKlPww3HZ74sy9mozS11534Vnjty637rXC0J
|
||||
h9ZrbWB85a7FkCMMXErQr7Fd88e2CtvgFZMN3QO8x3aKtd1Pw5sTdbgBwObJW2ul
|
||||
uIncrKTdcu1OofdPvAbT6shkdHvClUGcZXNY8ZCaPGqxmMnEh7zPRW1F4m4iP/68
|
||||
DzFc6PLZ
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 2 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAzCCAmwCEQC5L2DMiJ+hekYJuFtwbIqvMA0GCSqGSIb3DQEBBQUAMIHBMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xPDA6BgNVBAsTM0Ns
|
||||
YXNzIDIgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgLSBH
|
||||
MjE6MDgGA1UECxMxKGMpIDE5OTggVmVyaVNpZ24sIEluYy4gLSBGb3IgYXV0aG9y
|
||||
aXplZCB1c2Ugb25seTEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1c3QgTmV0d29yazAe
|
||||
Fw05ODA1MTgwMDAwMDBaFw0yODA4MDEyMzU5NTlaMIHBMQswCQYDVQQGEwJVUzEX
|
||||
MBUGA1UEChMOVmVyaVNpZ24sIEluYy4xPDA6BgNVBAsTM0NsYXNzIDIgUHVibGlj
|
||||
IFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgLSBHMjE6MDgGA1UECxMx
|
||||
KGMpIDE5OTggVmVyaVNpZ24sIEluYy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25s
|
||||
eTEfMB0GA1UECxMWVmVyaVNpZ24gVHJ1c3QgTmV0d29yazCBnzANBgkqhkiG9w0B
|
||||
AQEFAAOBjQAwgYkCgYEAp4gBIXQs5xoD8JjhlzwPIQjxnNuX6Zr8wgQGE75fUsjM
|
||||
HiwSViy4AWkszJkfrbCWrnkE8hM5wXuYuggs6MKEEyyqaekJ9MepAqRCwiNPStjw
|
||||
DqL7MWzJ5m+ZJwf15vRMeJ5t60aG+rmGyVTyssSv1EYcWskVMP8NbPUtDm3Of3cC
|
||||
AwEAATANBgkqhkiG9w0BAQUFAAOBgQByLvl/0fFx+8Se9sVeUYpAmLho+Jscg9ji
|
||||
nb3/7aHmZuovCfTK1+qlK5X2JGCGTUQug6XELaDTrnhpb3LabK4I8GOSN+a7xDAX
|
||||
rXfMSTWqz9iP0b63GJZHc2pUIjRkLbYWm1lbtFFZOrMLFPQS32eg9K0yZF6xRnIn
|
||||
jBJ7xUS0rg==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAjCCAmsCEH3Z/gfPqB63EHln+6eJNMYwDQYJKoZIhvcNAQEFBQAwgcExCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xh
|
||||
c3MgMyBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcy
|
||||
MTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3Jp
|
||||
emVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMB4X
|
||||
DTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVTMRcw
|
||||
FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgMyBQdWJsaWMg
|
||||
UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEo
|
||||
YykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5
|
||||
MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEB
|
||||
AQUAA4GNADCBiQKBgQDMXtERXVxp0KvTuWpMmR9ZmDCOFoUgRm1HP9SFIIThbbP4
|
||||
pO0M8RcPO/mn+SXXwc+EY/J8Y8+iR/LGWzOOZEAEaMGAuWQcRXfH2G71lSk8UOg0
|
||||
13gfqLptQ5GVj0VXXn7F+8qkBOvqlzdUMG+7AUcyM83cV5tkaWH4mx0ciU9cZwID
|
||||
AQABMA0GCSqGSIb3DQEBBQUAA4GBAFFNzb5cy5gZnBWyATl4Lk0PZ3BwmcYQWpSk
|
||||
U01UbSuvDV1Ai2TT1+7eVmGSX6bEHRBhNtMsJzzoKQm5EWR0zLVznxxIqbxhAe7i
|
||||
F6YM40AIOw7n60RzKprxaZLvcRTDOaxxp5EJb+RxBrO6WVcmeQD2+A2iMzAo1KpY
|
||||
oJ2daZH9
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 4 Public Primary Certification Authority - G2
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDAjCCAmsCEDKIjprS9esTR/h/xCA3JfgwDQYJKoZIhvcNAQEFBQAwgcExCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xh
|
||||
c3MgNCBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcy
|
||||
MTowOAYDVQQLEzEoYykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3Jp
|
||||
emVkIHVzZSBvbmx5MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMB4X
|
||||
DTk4MDUxODAwMDAwMFoXDTI4MDgwMTIzNTk1OVowgcExCzAJBgNVBAYTAlVTMRcw
|
||||
FQYDVQQKEw5WZXJpU2lnbiwgSW5jLjE8MDoGA1UECxMzQ2xhc3MgNCBQdWJsaWMg
|
||||
UHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAtIEcyMTowOAYDVQQLEzEo
|
||||
YykgMTk5OCBWZXJpU2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5
|
||||
MR8wHQYDVQQLExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMIGfMA0GCSqGSIb3DQEB
|
||||
AQUAA4GNADCBiQKBgQC68OTP+cSuhVS5B1f5j8V/aBH4xBewRNzjMHPVKmIquNDM
|
||||
HO0oW369atyzkSTKQWI8/AIBvxwWMZQFl3Zuoq29YRdsTjCG8FE3KlDHqGKB3FtK
|
||||
qsGgtG7rL+VXxbErQHDbWk2hjh+9Ax/YA9SPTJlxvOKCzFjomDqG04Y48wApHwID
|
||||
AQABMA0GCSqGSIb3DQEBBQUAA4GBAIWMEsGnuVAVess+rLhDityq3RS6iYF+ATwj
|
||||
cSGIL4LcY/oCRaxFWdcqWERbt5+BO5JoPeI3JPV7bI92NZYJqFmduc4jq3TWg/0y
|
||||
cyfYaT5DdPauxYma51N86Xv2S/PBZYPejYqcPIiNOVn8qj8ijaHBZlCBckztImRP
|
||||
T8qAkbYp
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
|
||||
VeriSign Class 1 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGjCCAwICEQCLW3VWhFSFCwDPrzhIzrGkMA0GCSqGSIb3DQEBBQUAMIHKMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZl
|
||||
cmlTaWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWdu
|
||||
LCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlT
|
||||
aWduIENsYXNzIDEgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
|
||||
dHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQswCQYD
|
||||
VQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlT
|
||||
aWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJ
|
||||
bmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWdu
|
||||
IENsYXNzIDEgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkg
|
||||
LSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAN2E1Lm0+afY8wR4
|
||||
nN493GwTFtl63SRRZsDHJlkNrAYIwpTRMx/wgzUfbhvI3qpuFU5UJ+/EbRrsC+MO
|
||||
8ESlV8dAWB6jRx9x7GD2bZTIGDnt/kIYVt/kTEkQeE4BdjVjEjbdZrwBBDajVWjV
|
||||
ojYJrKshJlQGrT/KFOCsyq0GHZXi+J3x4GD/wn91K0zM2v6HmSHquv4+VNfSWXjb
|
||||
PG7PoBMAGrgnoeS+Z5bKoMWznN3JdZ7rMJpfo83ZrngZPyPpXNspva1VyBtUjGP2
|
||||
6KbqxzcSXKMpHgLZ2x87tNcPVkeBFQRKr4Mn0cVYiMHd9qqnoxjaaKptEVHhv2Vr
|
||||
n5Z20T0CAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAq2aN17O6x5q25lXQBfGfMY1a
|
||||
qtmqRiYPce2lrVNWYgFHKkTp/j90CxObufRNG7LRX7K20ohcs5/Ny9Sn2WCVhDr4
|
||||
wTcdYcrnsMXlkdpUpqwxga6X3s0IrLjAl4B/bnKk52kTlWUfxJM8/XmPBNQ+T+r3
|
||||
ns7NZ3xPZQL/kYVUc8f/NveGLezQXk//EZ9yBta4GvFMDSZl4kSAHsef493oCtrs
|
||||
pSCAaWihT37ha88HQfqDjrw43bAuEbFrskLMmrz5SCJ5ShkPshw+IHTZasO+8ih4
|
||||
E1Z5T21Q6huwtVexN2ZYI/PcD98Kh8TvhgXVOBRgmaNL3gaWcSzy27YfpO8/7g==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 2 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGTCCAwECEGFwy0mMX5hFKeewptlQW3owDQYJKoZIhvcNAQEFBQAwgcoxCzAJ
|
||||
BgNVBAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjEfMB0GA1UECxMWVmVy
|
||||
aVNpZ24gVHJ1c3QgTmV0d29yazE6MDgGA1UECxMxKGMpIDE5OTkgVmVyaVNpZ24s
|
||||
IEluYy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25seTFFMEMGA1UEAxM8VmVyaVNp
|
||||
Z24gQ2xhc3MgMiBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0
|
||||
eSAtIEczMB4XDTk5MTAwMTAwMDAwMFoXDTM2MDcxNjIzNTk1OVowgcoxCzAJBgNV
|
||||
BAYTAlVTMRcwFQYDVQQKEw5WZXJpU2lnbiwgSW5jLjEfMB0GA1UECxMWVmVyaVNp
|
||||
Z24gVHJ1c3QgTmV0d29yazE6MDgGA1UECxMxKGMpIDE5OTkgVmVyaVNpZ24sIElu
|
||||
Yy4gLSBGb3IgYXV0aG9yaXplZCB1c2Ugb25seTFFMEMGA1UEAxM8VmVyaVNpZ24g
|
||||
Q2xhc3MgMiBQdWJsaWMgUHJpbWFyeSBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eSAt
|
||||
IEczMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEArwoNwtUs22e5LeWU
|
||||
J92lvuCwTY+zYVY81nzD9M0+hsuiiOLh2KRpxbXiv8GmR1BeRjmL1Za6tW8UvxDO
|
||||
JxOeBUebMXoT2B/Z0wI3i60sR/COgQanDTAM6/c8DyAd3HJG7qUCyFvDyVZpTMUY
|
||||
wZF7C9UTAJu878NIPkZgIIUq1ZC2zYugzDLdt/1AVbJQHFauzI13TccgTacxdu9o
|
||||
koqQHgiBVrKtaaNS0MscxCM9H5n+TOgWY47GCI72MfbS+uV23bUckqNJzc0BzWjN
|
||||
qWm6o+sdDZykIKbBoMXRRkwXbdKsZj+WjOCE1Db/IlnF+RFgqF8EffIa9iVCYQ/E
|
||||
Srg+iQIDAQABMA0GCSqGSIb3DQEBBQUAA4IBAQA0JhU8wI1NQ0kdvekhktdmnLfe
|
||||
xbjQ5F1fdiLAJvmEOjr5jLX77GDx6M4EsMjdpwOPMPOY36TmpDHf0xwLRtxyID+u
|
||||
7gU8pDM/CzmscHhzS5kr3zDCVLCoO1Wh/hYozUK9dG6A2ydEp85EXdQbkJgNHkKU
|
||||
sQAsBNB0owIFImNjzYO1+8FtYmtpdf1dcEG59b98377BMnMiIYtYgXsVkXq642RI
|
||||
sH/7NiXaldDxJBQX3RiAa0YjOVT1jmIJBB2UkKab5iXiQkWquJCtvgiPqQtCGJTP
|
||||
cjnhsUPgKM+351psE2tJs//jGHyJizNdrDPXp/naOlXJWBD5qu9ats9LS98q
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGjCCAwICEQCbfgZJoz5iudXukEhxKe9XMA0GCSqGSIb3DQEBBQUAMIHKMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZl
|
||||
cmlTaWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWdu
|
||||
LCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlT
|
||||
aWduIENsYXNzIDMgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
|
||||
dHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQswCQYD
|
||||
VQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlT
|
||||
aWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJ
|
||||
bmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWdu
|
||||
IENsYXNzIDMgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkg
|
||||
LSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAMu6nFL8eB8aHm8b
|
||||
N3O9+MlrlBIwT/A2R/XQkQr1F8ilYcEWQE37imGQ5XYgwREGfassbqb1EUGO+i2t
|
||||
KmFZpGcmTNDovFJbcCAEWNF6yaRpvIMXZK0Fi7zQWM6NjPXr8EJJC52XJ2cybuGu
|
||||
kxUccLwgTS8Y3pKI6GyFVxEa6X7jJhFUokWWVYPKMIno3Nij7SqAP395ZVc+FSBm
|
||||
CC+Vk7+qRy+oRpfwEuL+wgorUeZ25rdGt+INpsyow0xZVYnm6FNcHOqd8GIWC6fJ
|
||||
Xwzw3sJ2zq/3avL6QaaiMxTJ5Xpj055iN9WFZZ4O5lMkdBteHRJTW8cs54NJOxWu
|
||||
imi5V5cCAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAERSWwauSCPc/L8my/uRan2Te
|
||||
2yFPhpk0djZX3dAVL8WtfxUfN2JzPtTnX84XA9s1+ivbrmAJXx5fj267Cz3qWhMe
|
||||
DGBvtcC1IyIuBwvLqXTLR7sdwdela8wv0kL9Sd2nic9TutoAWii/gt/4uhMdUIaC
|
||||
/Y4wjylGsB49Ndo4YhYYSq3mtlFs3q9i6wHQHiT+eo8SGhJouPtmmRQURVyu565p
|
||||
F4ErWjfJXir0xuKhXFSbplQAz/DxwceYMBo7Nhbbo27q/a2ywtrvAkcTisDxszGt
|
||||
TxzhT5yvDwyd93gN2PQ1VoDat20Xj50egWTh/sVFuq1ruQp6Tk9LhO5L8X3dEQ==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 4 Public Primary Certification Authority - G3
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEGjCCAwICEQDsoKeLbnVqAc/EfMwvlF7XMA0GCSqGSIb3DQEBBQUAMIHKMQsw
|
||||
CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZl
|
||||
cmlTaWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWdu
|
||||
LCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlT
|
||||
aWduIENsYXNzIDQgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
|
||||
dHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQswCQYD
|
||||
VQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlT
|
||||
aWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJ
|
||||
bmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWdu
|
||||
IENsYXNzIDQgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkg
|
||||
LSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAK3LpRFpxlmr8Y+1
|
||||
GQ9Wzsy1HyDkniYlS+BzZYlZ3tCD5PUPtbut8XzoIfzk6AzufEUiGXaStBO3IFsJ
|
||||
+mGuqPKljYXCKtbeZjbSmwL0qJJgfJxptI8kHtCGUvYynEFYHiK9zUVilQhu0Gbd
|
||||
U6LM8BDcVHOLBKFGMzNcF0C5nk3T875Vg+ixiY5afJqWIpA7iCXy0lOIAgwLePLm
|
||||
NxdLMEYH5IBtptiWLugs+BGzOA1mppvqySNb247i8xOOGlktqgLw7KSHZtzBP/XY
|
||||
ufTsgsbSPZUd5cBPhMnZo0QoBmrXRazwa2rvTl/4EYIeOGM0ZlDUPpNz+jDDZq3/
|
||||
ky2X7wMCAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAj/ola09b5KROJ1WrIhVZPMq1
|
||||
CtRK26vdoV9TxaBXOcLORyu+OshWv8LZJxA6sQU8wHcxuzrTBXttmhwwjIDLk5Mq
|
||||
g6sFUYICABFna/OIYUdfA5PVWw3g8dShMjWFsjrbsIKr0csKvE+MW8VLADsfKoKm
|
||||
fjaF3H48ZwC15DtS4KjrXRX5xm3wrR0OhbepmnMUWluPQSjA1egtTaRezarZ7c7c
|
||||
2NU8Qh0XwRJdRTjDOPP8hS6DRkiy1yBfkjaP53kPmF6Z6PDQpLv1U70qzlmwr25/
|
||||
bLvSHgCwIe34QWKCudiyxLtGUPMxxY8BqHTr9Xgn2uf3ZkPznoM+IKrDNWCRzg==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G4
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIDhDCCAwqgAwIBAgIQL4D+I4wOIg9IZxIokYesszAKBggqhkjOPQQDAzCByjEL
|
||||
MAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQLExZW
|
||||
ZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNyBWZXJpU2ln
|
||||
biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxWZXJp
|
||||
U2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9y
|
||||
aXR5IC0gRzQwHhcNMDcxMTA1MDAwMDAwWhcNMzgwMTE4MjM1OTU5WjCByjELMAkG
|
||||
A1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQLExZWZXJp
|
||||
U2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNyBWZXJpU2lnbiwg
|
||||
SW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxWZXJpU2ln
|
||||
biBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9yaXR5
|
||||
IC0gRzQwdjAQBgcqhkjOPQIBBgUrgQQAIgNiAASnVnp8Utpkmw4tXNherJI9/gHm
|
||||
GUo9FANL+mAnINmDiWn6VMaaGF5VKmTeBvaNSjutEDxlPZCIBIngMGGzrl0Bp3ve
|
||||
fLK+ymVhAIau2o970ImtTR1ZmkGxvEeA3J5iw/mjgbIwga8wDwYDVR0TAQH/BAUw
|
||||
AwEB/zAOBgNVHQ8BAf8EBAMCAQYwbQYIKwYBBQUHAQwEYTBfoV2gWzBZMFcwVRYJ
|
||||
aW1hZ2UvZ2lmMCEwHzAHBgUrDgMCGgQUj+XTGoasjY5rw8+AatRIGCx7GS4wJRYj
|
||||
aHR0cDovL2xvZ28udmVyaXNpZ24uY29tL3ZzbG9nby5naWYwHQYDVR0OBBYEFLMW
|
||||
kf3upm7ktS5Jj4d4gYDs5bG1MAoGCCqGSM49BAMDA2gAMGUCMGYhDBgmYFo4e1ZC
|
||||
4Kf8NoRRkSAsdk1DPcQdhCPQrNZ8NQbOzWm9kA3bbEhCHQ6qQgIxAJw9SDkjOVga
|
||||
FRJZap7v1VmyHVIsmXHNxynfGyphe3HR3vPA5Q06Sqotp9iGKt0uEA==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Class 3 Public Primary Certification Authority - G5
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIE0zCCA7ugAwIBAgIQGNrRniZ96LtKIVjNzGs7SjANBgkqhkiG9w0BAQUFADCB
|
||||
yjELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQL
|
||||
ExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNiBWZXJp
|
||||
U2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxW
|
||||
ZXJpU2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0
|
||||
aG9yaXR5IC0gRzUwHhcNMDYxMTA4MDAwMDAwWhcNMzYwNzE2MjM1OTU5WjCByjEL
|
||||
MAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQLExZW
|
||||
ZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwNiBWZXJpU2ln
|
||||
biwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MUUwQwYDVQQDEzxWZXJp
|
||||
U2lnbiBDbGFzcyAzIFB1YmxpYyBQcmltYXJ5IENlcnRpZmljYXRpb24gQXV0aG9y
|
||||
aXR5IC0gRzUwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCvJAgIKXo1
|
||||
nmAMqudLO07cfLw8RRy7K+D+KQL5VwijZIUVJ/XxrcgxiV0i6CqqpkKzj/i5Vbex
|
||||
t0uz/o9+B1fs70PbZmIVYc9gDaTY3vjgw2IIPVQT60nKWVSFJuUrjxuf6/WhkcIz
|
||||
SdhDY2pSS9KP6HBRTdGJaXvHcPaz3BJ023tdS1bTlr8Vd6Gw9KIl8q8ckmcY5fQG
|
||||
BO+QueQA5N06tRn/Arr0PO7gi+s3i+z016zy9vA9r911kTMZHRxAy3QkGSGT2RT+
|
||||
rCpSx4/VBEnkjWNHiDxpg8v+R70rfk/Fla4OndTRQ8Bnc+MUCH7lP59zuDMKz10/
|
||||
NIeWiu5T6CUVAgMBAAGjgbIwga8wDwYDVR0TAQH/BAUwAwEB/zAOBgNVHQ8BAf8E
|
||||
BAMCAQYwbQYIKwYBBQUHAQwEYTBfoV2gWzBZMFcwVRYJaW1hZ2UvZ2lmMCEwHzAH
|
||||
BgUrDgMCGgQUj+XTGoasjY5rw8+AatRIGCx7GS4wJRYjaHR0cDovL2xvZ28udmVy
|
||||
aXNpZ24uY29tL3ZzbG9nby5naWYwHQYDVR0OBBYEFH/TZafC3ey78DAJ80M5+gKv
|
||||
MzEzMA0GCSqGSIb3DQEBBQUAA4IBAQCTJEowX2LP2BqYLz3q3JktvXf2pXkiOOzE
|
||||
p6B4Eq1iDkVwZMXnl2YtmAl+X6/WzChl8gGqCBpH3vn5fJJaCGkgDdk+bW48DW7Y
|
||||
5gaRQBi5+MHt39tBquCWIMnNZBU4gcmU7qKEKQsTb47bDN0lAtukixlE0kF6BWlK
|
||||
WE9gyn6CagsCqiUXObXbf+eEZSqVir2G3l6BFoMtEMze/aiCKm0oHw0LxOXnGiYZ
|
||||
4fQRbxC1lfznQgUy286dUV4otp6F01vvpX1FQHKOtw5rDgb7MzVIcbidJ4vEZV8N
|
||||
hnacRHr2lVz2XTIIM6RUthg/aFzyQkqFOFSDX9HoLPKsEdao7WNq
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
|
||||
VeriSign Universal Root Certification Authority
|
||||
-----BEGIN CERTIFICATE-----
|
||||
MIIEuTCCA6GgAwIBAgIQQBrEZCGzEyEDDrvkEhrFHTANBgkqhkiG9w0BAQsFADCB
|
||||
vTELMAkGA1UEBhMCVVMxFzAVBgNVBAoTDlZlcmlTaWduLCBJbmMuMR8wHQYDVQQL
|
||||
ExZWZXJpU2lnbiBUcnVzdCBOZXR3b3JrMTowOAYDVQQLEzEoYykgMjAwOCBWZXJp
|
||||
U2lnbiwgSW5jLiAtIEZvciBhdXRob3JpemVkIHVzZSBvbmx5MTgwNgYDVQQDEy9W
|
||||
ZXJpU2lnbiBVbml2ZXJzYWwgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTAe
|
||||
Fw0wODA0MDIwMDAwMDBaFw0zNzEyMDEyMzU5NTlaMIG9MQswCQYDVQQGEwJVUzEX
|
||||
MBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlTaWduIFRydXN0
|
||||
IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAyMDA4IFZlcmlTaWduLCBJbmMuIC0gRm9y
|
||||
IGF1dGhvcml6ZWQgdXNlIG9ubHkxODA2BgNVBAMTL1ZlcmlTaWduIFVuaXZlcnNh
|
||||
bCBSb290IENlcnRpZmljYXRpb24gQXV0aG9yaXR5MIIBIjANBgkqhkiG9w0BAQEF
|
||||
AAOCAQ8AMIIBCgKCAQEAx2E3XrEBNNti1xWb/1hajCMj1mCOkdeQmIN65lgZOIzF
|
||||
9uVkhbSicfvtvbnazU0AtMgtc6XHaXGVHzk8skQHnOgO+k1KxCHfKWGPMiJhgsWH
|
||||
H26MfF8WIFFE0XBPV+rjHOPMee5Y2A7Cs0WTwCznmhcrewA3ekEzeOEz4vMQGn+H
|
||||
LL729fdC4uW/h2KJXwBL38Xd5HVEMkE6HnFuacsLdUYI0crSK5XQz/u5QGtkjFdN
|
||||
/BMReYTtXlT2NJ8IAfMQJQYXStrxHXpma5hgZqTZ79IugvHw7wnqRMkVauIDbjPT
|
||||
rJ9VAMf2CGqUuV/c4DPxhGD5WycRtPwW8rtWaoAljQIDAQABo4GyMIGvMA8GA1Ud
|
||||
EwEB/wQFMAMBAf8wDgYDVR0PAQH/BAQDAgEGMG0GCCsGAQUFBwEMBGEwX6FdoFsw
|
||||
WTBXMFUWCWltYWdlL2dpZjAhMB8wBwYFKw4DAhoEFI/l0xqGrI2Oa8PPgGrUSBgs
|
||||
exkuMCUWI2h0dHA6Ly9sb2dvLnZlcmlzaWduLmNvbS92c2xvZ28uZ2lmMB0GA1Ud
|
||||
DgQWBBS2d/ppSEefUxLVwuoHMnYH0ZcHGTANBgkqhkiG9w0BAQsFAAOCAQEASvj4
|
||||
sAPmLGd75JR3Y8xuTPl9Dg3cyLk1uXBPY/ok+myDjEedO2Pzmvl2MpWRsXe8rJq+
|
||||
seQxIcaBlVZaDrHC1LGmWazxY8u4TB1ZkErvkBYoH1quEPuBUDgMbMzxPcP1Y+Oz
|
||||
4yHJJDnp/RVmRvQbEdBNc6N9Rvk97ahfYtTxP/jgdFcrGJ2BtMQo2pSXpXDrrB2+
|
||||
BxHw1dvd5Yzw1TKwg+ZX4o+/vqGqvz0dtdQ46tewXDpPaj+PwGZsY6rp2aQW9IHR
|
||||
lRQOfc2VNNnSj3BzgXucfr2YYdhFh5iQxeuGMMY1v/D/w1WIg0vvBZIGcfK4mJO3
|
||||
7M2CYfE45k+XmCpajQ==
|
||||
-----END CERTIFICATE-----
|
||||
|
||||
BIN
proprietary/vendor/etc/camera/M_Attribute_AG_BMW_1.1.0.model.hardcode
vendored
Normal file
BIN
proprietary/vendor/etc/camera/M_Attribute_AG_BMW_1.1.0.model.hardcode
vendored
Normal file
Binary file not shown.
BIN
proprietary/vendor/etc/camera/ashdr/ncf_pack.ncf
vendored
Normal file
BIN
proprietary/vendor/etc/camera/ashdr/ncf_pack.ncf
vendored
Normal file
Binary file not shown.
BIN
proprietary/vendor/etc/camera/ashdr/ncf_pack_imx471.ncf
vendored
Normal file
BIN
proprietary/vendor/etc/camera/ashdr/ncf_pack_imx471.ncf
vendored
Normal file
Binary file not shown.
BIN
proprietary/vendor/etc/camera/ashdr/ncf_pack_imx481.ncf
vendored
Normal file
BIN
proprietary/vendor/etc/camera/ashdr/ncf_pack_imx481.ncf
vendored
Normal file
Binary file not shown.
BIN
proprietary/vendor/etc/camera/ashdr/ncf_pack_imx586.ncf
vendored
Normal file
BIN
proprietary/vendor/etc/camera/ashdr/ncf_pack_imx586.ncf
vendored
Normal file
Binary file not shown.
BIN
proprietary/vendor/etc/camera/calibrationOutput_uw.bin
vendored
Normal file
BIN
proprietary/vendor/etc/camera/calibrationOutput_uw.bin
vendored
Normal file
Binary file not shown.
BIN
proprietary/vendor/etc/camera/calibrationOutput_wt.bin
vendored
Normal file
BIN
proprietary/vendor/etc/camera/calibrationOutput_wt.bin
vendored
Normal file
Binary file not shown.
BIN
proprietary/vendor/etc/camera/darksight/darksight_main.bin
vendored
Normal file
BIN
proprietary/vendor/etc/camera/darksight/darksight_main.bin
vendored
Normal file
Binary file not shown.
BIN
proprietary/vendor/etc/camera/darksight/darksight_ultrawide.bin
vendored
Normal file
BIN
proprietary/vendor/etc/camera/darksight/darksight_ultrawide.bin
vendored
Normal file
Binary file not shown.
BIN
proprietary/vendor/etc/camera/distortion_result.bin
vendored
Normal file
BIN
proprietary/vendor/etc/camera/distortion_result.bin
vendored
Normal file
Binary file not shown.
BIN
proprietary/vendor/etc/camera/distortion_result_front.bin
vendored
Normal file
BIN
proprietary/vendor/etc/camera/distortion_result_front.bin
vendored
Normal file
Binary file not shown.
14
proprietary/vendor/etc/charger_fstab.qti
vendored
Normal file
14
proprietary/vendor/etc/charger_fstab.qti
vendored
Normal file
@@ -0,0 +1,14 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
|
||||
#
|
||||
|
||||
# Android fstab file.
|
||||
# The filesystem that contains the filesystem checker binary (typically /system) cannot
|
||||
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
|
||||
|
||||
#<src> <mnt_point> <type> <mnt_flags and options> <fs_mgr_flags>
|
||||
/dev/block/bootdevice/by-name/persist /mnt/vendor/persist ext4 noatime,nosuid,nodev,barrier=1 wait
|
||||
17
proprietary/vendor/etc/cne/mwqem.conf
vendored
Normal file
17
proprietary/vendor/etc/cne/mwqem.conf
vendored
Normal file
@@ -0,0 +1,17 @@
|
||||
#configuration parameters for Multi-network Wireless Quality Estimation and Management.
|
||||
|
||||
#Number of previous latency iterations to track to decide the better LQS interface
|
||||
latency_count:3
|
||||
#Threshold in ms to decide the better interface for LQS.
|
||||
latency_threshold:10
|
||||
#Number of tcp connections to be established in each latency session
|
||||
max_tcp_connects:3
|
||||
#Max waiting time for a dns query to be resolved
|
||||
dns_timeout:9
|
||||
#Minimum change in mwqem ratio to update the new LQA ratio
|
||||
lqa_update_threshold:0.25
|
||||
#Timer in msec to track the lqs updates. Only one update will be allowed
|
||||
#in this duration
|
||||
lqa_update_count_timer:10000
|
||||
#default URL for establishing a tcp sessions
|
||||
mwqem_http_url:www.qualcomm.com
|
||||
239
proprietary/vendor/etc/cne/profileMwqem.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/profileMwqem.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile1.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile1.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile2.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile2.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile3.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile3.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile4.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile4.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1.0</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1.0</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1.0</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1.0</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1.0</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1.0</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile5.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile5.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile6.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile6.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile1.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile1.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile15.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile15.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile16.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile16.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile17.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile17.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile18.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile18.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile19.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile19.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile2.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile2.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile20.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile20.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile21.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile21.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile3.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile3.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile32.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile32.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-99,-99</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-99,-99</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile4.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile4.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile5.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile5.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2016-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-72,-72</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-72,-72</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-72</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile6.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile6.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile7.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile7.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile1.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile1.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile2.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile2.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile3.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile3.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile4.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile4.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile5.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile5.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>1</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>12</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>3</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>1</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>60</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>1</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>1</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>1</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile6.xml
vendored
Normal file
239
proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile6.xml
vendored
Normal file
@@ -0,0 +1,239 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.-->
|
||||
<AndsfPolicy><Andsf>
|
||||
<Version>5.1</Version>
|
||||
<Name>Test 1</Name>
|
||||
<Ext>
|
||||
<WQE>
|
||||
<InterfaceManager>
|
||||
<BQE_Disabled>true</BQE_Disabled>
|
||||
<ICD_Disabled>true</ICD_Disabled>
|
||||
<!-- Default bqe thresholds where no apIds are specified. -->
|
||||
<BQE_Thresholds Id="128">
|
||||
<RadioTechnology Type="CDMA2000">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_0">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_A">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EVDO_B">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EDGE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="UMTS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSDPA">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="GPRS">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="LTE">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="EHRPD">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
<RadioTechnology Type="HSPAP">
|
||||
<Threshold units="bps">0</Threshold>
|
||||
</RadioTechnology>
|
||||
</BQE_Thresholds>
|
||||
<Authentication>
|
||||
<MaxAuthTime>60</MaxAuthTime>
|
||||
<IcdBanRetest>3</IcdBanRetest>
|
||||
<AuthApps>
|
||||
<Appname>someauthapp1</Appname>
|
||||
<Appname>someauthapp2</Appname>
|
||||
<Appname>someauthapp3</Appname>
|
||||
</AuthApps>
|
||||
</Authentication>
|
||||
<ICD config-type="disabled">
|
||||
</ICD>
|
||||
<TQE>
|
||||
<!-- Default node for TQE_Thresholds element -->
|
||||
<TQE_Thresholds Id="128">
|
||||
<!-- Disabling Broken Backhaul Detector module -->
|
||||
<BBD_Disabled>true</BBD_Disabled>
|
||||
<!-- Disabling Degraded Backhaul Detector module -->
|
||||
<DBD_Disabled>true</DBD_Disabled>
|
||||
<!-- Threshold on downlink gap indicator metric -->
|
||||
<DGIMThresh units="msecs">400</DGIMThresh>
|
||||
<!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
|
||||
<DBDTputThresh units="bps">1000000</DBDTputThresh>
|
||||
<!-- Time window for TQE history -->
|
||||
<TQETimeWindow units="secs">77</TQETimeWindow>
|
||||
<!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
|
||||
<RatioThresh>0.2</RatioThresh>
|
||||
</TQE_Thresholds>
|
||||
</TQE>
|
||||
</InterfaceManager>
|
||||
</WQE>
|
||||
<CQE prodId="Rome">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.09</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>4</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.55</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>50</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>8</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.15</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>4</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Helium">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-79,-82</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-79,-82</RSSIDropThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
|
||||
<!-- Threshold for RX MPDU PER -->
|
||||
<RMP_THR>0.12</RMP_THR>
|
||||
<!-- Minimum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_CNT_THR>10</RMP_CNT_THR>
|
||||
<!-- Cutoff RX MCS index -->
|
||||
<RX_MCS_THR>9</RX_MCS_THR>
|
||||
<!-- Cutoff RX BW index -->
|
||||
<RX_BW_THR>3</RX_BW_THR>
|
||||
<!-- Threshold for TX MSDU drop -->
|
||||
<TMD_THR>0.1</TMD_THR>
|
||||
<!-- Minimum MSDU count to activate TX MSDU drop -->
|
||||
<TMD_CNT_THR>2</TMD_CNT_THR>
|
||||
<!-- Threshold for MPDU retry rate -->
|
||||
<TMR_THR>0.64</TMR_THR>
|
||||
<!-- Minimum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_CNT_THR>100</TMR_CNT_THR>
|
||||
<!-- Cutoff TX MCS index -->
|
||||
<TX_MCS_THR>4</TX_MCS_THR>
|
||||
<!-- Cutoff TX BW index -->
|
||||
<TX_BW_THR>2</TX_BW_THR>
|
||||
<!-- Maximum MPDU count to activate RX MPDU PER -->
|
||||
<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
|
||||
<!-- Maximum MPDU count to activate MPDU retry rate -->
|
||||
<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
|
||||
<!-- Threshold for PERAM -->
|
||||
<PERAM_THR>0.22</PERAM_THR>
|
||||
<!-- Minimum MPDU count to activate PERAM -->
|
||||
<PERAM_CNT_THR>20</PERAM_CNT_THR>
|
||||
<!-- Maximum MPDU count to activate PERAM -->
|
||||
<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
|
||||
<!-- CQE throughput Threshold-->
|
||||
<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
<CQE prodId="Pronto">
|
||||
<!-- Default node for CQE_Thresholds element -->
|
||||
<CQE_Thresholds Id="128">
|
||||
<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIAddThreshold units="dbm">-78,-78</RSSIAddThreshold>
|
||||
<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
|
||||
<!-- a candidate for interface selection -->
|
||||
<RSSIDropThreshold units="dbm">-78,-78</RSSIDropThreshold>
|
||||
<!-- RSSI threshold from which to select linear model to compute CQE metric -->
|
||||
<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
|
||||
<!-- Interval over whcih RSSI values are averaged -->
|
||||
<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
|
||||
<!-- RSSI threshold below which MAC hysteresis timer is not started -->
|
||||
<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
|
||||
<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
|
||||
<!-- Setting CQETimer to zero disables the CQE -->
|
||||
<CQETimer units="secs">2</CQETimer>
|
||||
<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
|
||||
<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
|
||||
<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
|
||||
<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
|
||||
<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
|
||||
<FrameCntThreshold units="frames">8</FrameCntThreshold>
|
||||
<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
|
||||
<ColdStartThreshold units="frames">2</ColdStartThreshold>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MACMibThreshold2a>0.42</MACMibThreshold2a>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is greater than RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
|
||||
<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
|
||||
<!-- such as retry, multi-retry, fail and ack fail metric -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MACMibThreshold2b>0.21</MACMibThreshold2b>
|
||||
<!-- The weightage that given to retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
|
||||
<!-- The weightage that given to multi-retry metric in computation of CQE -->
|
||||
<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
|
||||
<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
|
||||
</CQE_Thresholds>
|
||||
</CQE>
|
||||
</Ext>
|
||||
</Andsf></AndsfPolicy>
|
||||
19
proprietary/vendor/etc/configstore/vpp.configstore.xml
vendored
Normal file
19
proprietary/vendor/etc/configstore/vpp.configstore.xml
vendored
Normal file
@@ -0,0 +1,19 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!--
|
||||
Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
|
||||
<CapabilityStore version="1">
|
||||
<namespace name="vpp">
|
||||
<!-- #ifdef OPLUS_FEATURE_HQV -->
|
||||
<!-- Yugang.Ma@PSW.MM.MediaServer.Player, 2019/09/20, [Modify for HQV feature]-->
|
||||
<capability key="default_config" value="false"/>
|
||||
<capability key="disable_dynamic_hal" value="true"/>
|
||||
<capability key="enable" value="true"/>
|
||||
<!-- #endif OPLUS_FEATURE_HQV-->
|
||||
<capability key="enable_idle_timeout" value="true"/>
|
||||
<capability key="idle_timeout_ms" value="1000"/>
|
||||
</namespace>
|
||||
</CapabilityStore>
|
||||
1262
proprietary/vendor/etc/data/dsi_config.xml
vendored
Normal file
1262
proprietary/vendor/etc/data/dsi_config.xml
vendored
Normal file
File diff suppressed because it is too large
Load Diff
3265
proprietary/vendor/etc/data/netmgr_config.xml
vendored
Normal file
3265
proprietary/vendor/etc/data/netmgr_config.xml
vendored
Normal file
File diff suppressed because it is too large
Load Diff
19
proprietary/vendor/etc/default-permissions/com.qualcomm.qti.cne.xml
vendored
Normal file
19
proprietary/vendor/etc/default-permissions/com.qualcomm.qti.cne.xml
vendored
Normal file
@@ -0,0 +1,19 @@
|
||||
<?xml version="1.0" encoding="utf-8"?>
|
||||
<!--
|
||||
~ Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
~ All Rights Reserved.
|
||||
~ Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
|
||||
<!--
|
||||
This XML file declares which signature|privileged permissions should be
|
||||
granted to privileged applications on QTI devices.
|
||||
It allows additional grants on top of privapp-permissions-platform.xml
|
||||
-->
|
||||
|
||||
<exceptions>
|
||||
<exception package="com.qualcomm.qti.cne">
|
||||
<permission name="android.permission.ACCESS_COARSE_LOCATION" fixed="false"/>
|
||||
<permission name="android.permission.READ_PHONE_STATE" fixed="false"/>
|
||||
</exception>
|
||||
</exceptions>
|
||||
60
proprietary/vendor/etc/flp.conf
vendored
Normal file
60
proprietary/vendor/etc/flp.conf
vendored
Normal file
@@ -0,0 +1,60 @@
|
||||
###################################
|
||||
##### FLP settings #####
|
||||
###################################
|
||||
|
||||
###################################
|
||||
# FLP BATCH SIZE
|
||||
###################################
|
||||
# The number of batched locations
|
||||
# requested to modem. The desired number
|
||||
# defined below may not be satisfied, as
|
||||
# the modem can only return the number
|
||||
# of batched locations that can be allocated,
|
||||
# which is limited by memory. The default
|
||||
# batch size defined as 20 as below.
|
||||
BATCH_SIZE=20
|
||||
|
||||
###################################
|
||||
# FLP OUTDOOR TRIP BATCH SIZE
|
||||
###################################
|
||||
# The number of batched locations
|
||||
# requested to modem for outdoor
|
||||
# trip batching. The desired number
|
||||
# defined below may not be satisfied, as
|
||||
# the modem can only return the number
|
||||
# of batched locations that can be allocated,
|
||||
# which is limited by memory. The default
|
||||
# trip batch size defined as 600 as below.
|
||||
OUTDOOR_TRIP_BATCH_SIZE=600
|
||||
|
||||
###################################
|
||||
# FLP BATCHING SESSION TIMEOUT
|
||||
###################################
|
||||
# Duration with which batch session timeout
|
||||
# happens in milliseconds. If not specified
|
||||
# or set to zero, batching session timeout
|
||||
# defaults to 20 seconds by the modem.
|
||||
# BATCH_SESSION_TIMEOUT=20000
|
||||
|
||||
###################################
|
||||
# FLP BATCHING ACCURACY
|
||||
###################################
|
||||
# Set to one of the defined values below
|
||||
# to define the accuracy of batching.
|
||||
# If not specified, accuracy defaults
|
||||
# to LOW.
|
||||
# FLP BATCHING ACCURACY values:
|
||||
# Low accuracy = 0
|
||||
# Medium accuracy = 1
|
||||
# High accuracy = 2
|
||||
ACCURACY=1
|
||||
|
||||
####################################
|
||||
# By default if network fixes are not sensor assisted
|
||||
# these fixes must be dropped. This parameter adds an exception
|
||||
# for targets where there is no PDR and we still want to
|
||||
# report out network fixes
|
||||
# 0: MUST NOT ALLOW NETWORK FIXES
|
||||
# 1: ALLOW NETWORK FIXES
|
||||
####################################
|
||||
ALLOW_NETWORK_FIXES = 0
|
||||
135
proprietary/vendor/etc/gnss_antenna_info.conf
vendored
Normal file
135
proprietary/vendor/etc/gnss_antenna_info.conf
vendored
Normal file
@@ -0,0 +1,135 @@
|
||||
###################################
|
||||
##### ANTENNA INFORMATION #####
|
||||
###################################
|
||||
|
||||
###################################
|
||||
# ANTENNA INFO VECTOR SIZE
|
||||
###################################
|
||||
# The number of antenna info
|
||||
# structures in the vector. Each
|
||||
# entry in this vector is a structure
|
||||
# with the following elements:
|
||||
#
|
||||
# - CARRIER_FREQUENCY
|
||||
# - PC_OFFSET
|
||||
# - PC_VARIATION_CORRECTION
|
||||
# - PC_VARIATION_CORRECTION_UNC
|
||||
# - SIGNAL_GAIN_CORRECTION
|
||||
# - SIGNAL_GAIN_CORRECTION_UNC
|
||||
#
|
||||
# Notes:
|
||||
# CARRIER_FREQUENCY
|
||||
# The carrier frequency in MHz.
|
||||
#
|
||||
# PC = PHASE CENTER
|
||||
# PC_OFFSET is a structure with six
|
||||
# elements: x, y, z and their associated uncertainties
|
||||
# Phase center offset (PCO) is defined with
|
||||
# respect to the origin of the Android sensor coordinate system, e.g.,
|
||||
# center of primary screen for mobiles
|
||||
#
|
||||
# PC_VARIATION_CORRECTION
|
||||
# 2D vectors representing the phase center variation (PCV) corrections,
|
||||
# in millimeters, at regularly spaced azimuthal angle (theta) and zenith angle
|
||||
# (phi). The PCV correction is added to the phase measurement to obtain the
|
||||
# corrected value.
|
||||
# The azimuthal angle, theta, is defined with respect to the X axis of the
|
||||
# Android sensor coordinate system, increasing toward the Y axis. The zenith
|
||||
# angle, phi, is defined with respect to the Z axis of the Android Sensor
|
||||
# coordinate system, increasing toward the X-Y plane.
|
||||
# Each row vector (outer vectors) represents a fixed theta. The first row
|
||||
# corresponds to a theta angle of 0 degrees. The last row corresponds to a
|
||||
# theta angle of (360 - deltaTheta) degrees, where deltaTheta is the regular
|
||||
# spacing between azimuthal angles, i.e., deltaTheta = 360 / (number of rows).
|
||||
# The columns (inner vectors) represent fixed zenith angles, beginning at 0
|
||||
# degrees and ending at 180 degrees. They are separated by deltaPhi, the regular
|
||||
# spacing between zenith angles, i.e., deltaPhi = 180 / (number of columns - 1).
|
||||
#
|
||||
# PC_VARIATION_CORRECTION_UNC
|
||||
# 2D vectors of 1-sigma uncertainty in millimeters associated with the PCV
|
||||
# correction values.
|
||||
#
|
||||
# SIGNAL_GAIN_CORRECTION
|
||||
# 2D vectors representing the signal gain corrections at regularly spaced
|
||||
# azimuthal angle (theta) and zenith angle (phi). The values are calculated or
|
||||
# measured at the antenna feed point without considering the radio and receiver
|
||||
# noise figure and path loss contribution, in dBi, i.e., decibel over isotropic
|
||||
# antenna with the same total power. The signal gain correction is added the
|
||||
# signal gain measurement to obtain the corrected value.
|
||||
# The azimuthal angle, theta, is defined with respect to the X axis of the
|
||||
# Android sensor coordinate system, increasing toward the Y axis. The zenith
|
||||
# angle, phi, is defined with respect to the Z axis of the Android Sensor
|
||||
# coordinate system, increasing toward the X-Y plane.
|
||||
# Each row vector (outer vectors) represents a fixed theta. The first row
|
||||
# corresponds to a theta angle of 0 degrees. The last row corresponds to a
|
||||
# theta angle of (360 - deltaTheta) degrees, where deltaTheta is the regular
|
||||
# spacing between azimuthal angles, i.e., deltaTheta = 360 / (number of rows).
|
||||
# The columns (inner vectors) represent fixed zenith angles, beginning at 0
|
||||
# degrees and ending at 180 degrees. They are separated by deltaPhi, the regular
|
||||
# spacing between zenith angles, i.e., deltaPhi = 180 / (number of columns - 1).
|
||||
#
|
||||
# SIGNAL_GAIN_CORRECTION_UNC
|
||||
# 2D vectors of 1-sigma uncertainty in dBi associated with the signal
|
||||
# gain correction values.
|
||||
#
|
||||
# The number of rows and columns could be the same for PC variation correction
|
||||
# and signal gain corrections, or could be different
|
||||
# If the former then NUMBER_OF_ROWS_ and NUMBER_OF_COLUMNS_ are specified once
|
||||
# only, if the latter then NUMBER_OF_ROWS_ and NUMBER_OF_COLUMNS_ represent
|
||||
# the number of rows/columns for PC variation correction and
|
||||
# NUMBER_OF_ROWS_SGC_ and NUMBER_OF_COLUMNS_SGC_ represent the number of
|
||||
# rows/columns for signal gain corrections
|
||||
|
||||
# ANTENNA_INFO_VECTOR_SIZE must be non zero if antenna corrections are sent
|
||||
# ANTENNA_INFO_VECTOR_SIZE = 2
|
||||
|
||||
CARRIER_FREQUENCY_0 = 1575.42
|
||||
|
||||
PC_OFFSET_0 = 1.2 0.1 3.4 0.2 5.6 0.3
|
||||
|
||||
NUMBER_OF_ROWS_0 = 3
|
||||
NUMBER_OF_COLUMNS_0 = 4
|
||||
|
||||
PC_VARIATION_CORRECTION_0_ROW_0 = 11.22 33.44 55.66 77.88
|
||||
PC_VARIATION_CORRECTION_0_ROW_1 = 10.2 30.4 50.6 70.8
|
||||
PC_VARIATION_CORRECTION_0_ROW_2 = 12.2 34.4 56.6 78.8
|
||||
|
||||
PC_VARIATION_CORRECTION_UNC_0_ROW_0 = 0.1 0.2 0.3 0.4
|
||||
PC_VARIATION_CORRECTION_UNC_0_ROW_1 = 1.1 1.2 1.3 1.4
|
||||
PC_VARIATION_CORRECTION_UNC_0_ROW_2 = 2.1 2.2 2.3 2.4
|
||||
|
||||
SIGNAL_GAIN_CORRECTION_0_ROW_0 = 9.8 8.7 7.6 6.5
|
||||
SIGNAL_GAIN_CORRECTION_0_ROW_1 = 5.4 4.3 3.2 2.1
|
||||
SIGNAL_GAIN_CORRECTION_0_ROW_2 = 1.3 2.4 3.5 4.6
|
||||
|
||||
SIGNAL_GAIN_CORRECTION_UNC_0_ROW_0 = 0.11 0.22 0.33 0.44
|
||||
SIGNAL_GAIN_CORRECTION_UNC_0_ROW_1 = 0.55 0.66 0.77 0.88
|
||||
SIGNAL_GAIN_CORRECTION_UNC_0_ROW_2 = 0.91 0.92 0.93 0.94
|
||||
|
||||
|
||||
CARRIER_FREQUENCY_1 = 1227.6
|
||||
|
||||
PC_OFFSET_1 = 3.4 0.2 5.6 0.3 1.2 0.1
|
||||
|
||||
NUMBER_OF_ROWS_1 = 4
|
||||
NUMBER_OF_COLUMNS_1 = 2
|
||||
NUMBER_OF_ROWS_SGC_1 = 3
|
||||
NUMBER_OF_COLUMNS_SGC_1 = 4
|
||||
|
||||
PC_VARIATION_CORRECTION_1_ROW_0 = 55.66 77.88
|
||||
PC_VARIATION_CORRECTION_1_ROW_1 = 11.22 33.44
|
||||
PC_VARIATION_CORRECTION_1_ROW_2 = 56.6 78.8
|
||||
PC_VARIATION_CORRECTION_1_ROW_3 = 12.2 34.4
|
||||
|
||||
PC_VARIATION_CORRECTION_UNC_1_ROW_0 = 0.3 0.4
|
||||
PC_VARIATION_CORRECTION_UNC_1_ROW_1 = 1.1 1.2
|
||||
PC_VARIATION_CORRECTION_UNC_1_ROW_2 = 2.1 2.2
|
||||
PC_VARIATION_CORRECTION_UNC_1_ROW_3 = 0.1 0.2
|
||||
|
||||
SIGNAL_GAIN_CORRECTION_1_ROW_0 = 7.6 6.5 5.4 4.3
|
||||
SIGNAL_GAIN_CORRECTION_1_ROW_1 = 1.3 2.4 9.8 8.7
|
||||
SIGNAL_GAIN_CORRECTION_1_ROW_2 = 1.4 2.5 3.6 4.7
|
||||
|
||||
SIGNAL_GAIN_CORRECTION_UNC_1_ROW_0 = 0.91 0.92 0.55 0.66
|
||||
SIGNAL_GAIN_CORRECTION_UNC_1_ROW_1 = 0.11 0.22 0.93 0.94
|
||||
SIGNAL_GAIN_CORRECTION_UNC_1_ROW_2 = 0.95 0.96 0.33 0.44
|
||||
61
proprietary/vendor/etc/gpfspath_oem_config.xml
vendored
Normal file
61
proprietary/vendor/etc/gpfspath_oem_config.xml
vendored
Normal file
@@ -0,0 +1,61 @@
|
||||
<!--
|
||||
Copyright (c) 2017 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
|
||||
<!--
|
||||
|
||||
This file is configured by OEM to customize the path used by GP FS listener
|
||||
service to save files, and will be located in /vendor/etc on device
|
||||
|
||||
"gp_data_path" and "gp_persist_path" are the /data and /persist partition
|
||||
path to save files, respectively.
|
||||
By default, "gp_data_path" is "/data/vendor/tzstorage/", and
|
||||
"gp_persist_path" is "/mnt/vendor/persist/data/".
|
||||
|
||||
To replace with different paths, please also create folder in init.qcom.rc
|
||||
file and update SEAndroid policy.
|
||||
|
||||
Take "/data/vendor/tzstorage/" as an example below,
|
||||
|
||||
A) rootdir/etc/init.qcom.rc:
|
||||
# Create /data/vendor/tzstorage directory for SFS listener
|
||||
mkdir /data/vendor/tzstorage 0770 system system
|
||||
|
||||
B) common/file.te:
|
||||
# SFS listener data file
|
||||
type data_tzstorage_file, file_type, data_file_type;
|
||||
|
||||
C) common/file_contexts:
|
||||
/data/vendor/tzstorage(/.*)? u:object_r:data_tzstorage_file:s0
|
||||
|
||||
D) common/qseecomd.te:
|
||||
# Allow SFS to write to data partition
|
||||
allow tee data_tzstorage_file:dir create_dir_perms;
|
||||
allow tee data_tzstorage_file:file create_file_perms;
|
||||
|
||||
"gp_whitelist_count" and "gp_whitelist_path"
|
||||
|
||||
Some paths needs "/data/vendor/tzstorage" appended to it at the beginning
|
||||
as they do not have access/permissions on their own.
|
||||
Use gp_whitelist_count and gp_whitelist_paths entries to add more such paths.
|
||||
By default, we add "/data/system/users" and "/data/misc/qsee" for current use
|
||||
cases.
|
||||
|
||||
To add an extra path, increment the count in gp_whitelist_count and add a new
|
||||
gp_whitelist_path entry. It is very critical that the count matches with the
|
||||
number of path entries.
|
||||
|
||||
-->
|
||||
|
||||
|
||||
<sfs_path>
|
||||
<gp_data_path> /data/vendor/tzstorage/ </gp_data_path>
|
||||
<gp_persist_path> /mnt/vendor/persist/data/ </gp_persist_path>
|
||||
<gp_whitelist_count> 4 </gp_whitelist_count>
|
||||
<gp_whitelist_path> /data/system/users/ </gp_whitelist_path>
|
||||
<gp_whitelist_path> /data/misc/qsee/ </gp_whitelist_path>
|
||||
<gp_whitelist_path> /qwes </gp_whitelist_path>
|
||||
<gp_whitelist_path> /qwes/licenses </gp_whitelist_path>
|
||||
</sfs_path>
|
||||
401
proprietary/vendor/etc/gps.conf
vendored
Normal file
401
proprietary/vendor/etc/gps.conf
vendored
Normal file
@@ -0,0 +1,401 @@
|
||||
# Error Estimate
|
||||
# _SET = 1
|
||||
# _CLEAR = 0
|
||||
ERR_ESTIMATE=0
|
||||
|
||||
#NTP server
|
||||
NTP_SERVER=time.xtracloud.net
|
||||
|
||||
#XTRA CA path
|
||||
XTRA_CA_PATH=/usr/lib/ssl-1.1/certs
|
||||
|
||||
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
||||
# 4 - Debug, 5 - Verbose
|
||||
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
||||
#ifndef OPLUS_BUG_DEBUG
|
||||
#LinHuaqiu@CONNECTIVITY.GPS.LOCATION.LOG.1065783, 2017/11/04, Add for gps log control
|
||||
#DEBUG_LEVEL = 3
|
||||
#else /* OPLUS_BUG_DEBUG */
|
||||
DEBUG_LEVEL = 2
|
||||
#endif /* OPLUS_BUG_DEBUG */
|
||||
|
||||
# Intermediate position report, 1=enable, 0=disable
|
||||
INTERMEDIATE_POS=0
|
||||
|
||||
# supl version 1.0
|
||||
SUPL_VER=0x10000
|
||||
|
||||
# Emergency SUPL, 1=enable, 0=disable
|
||||
#SUPL_ES=1
|
||||
|
||||
#Choose PDN for Emergency SUPL
|
||||
#1 - Use emergency PDN
|
||||
#0 - Use regular SUPL PDN for Emergency SUPL
|
||||
#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
|
||||
|
||||
#SUPL_MODE is a bit mask set in config.xml per carrier by default.
|
||||
#If it is uncommented here, this value will overwrite the value from
|
||||
#config.xml.
|
||||
#MSA=0X2
|
||||
#MSB=0X1
|
||||
#SUPL_MODE=
|
||||
|
||||
# GPS Capabilities bit mask
|
||||
# SCHEDULING = 0x01
|
||||
# MSB = 0x02
|
||||
# MSA = 0x04
|
||||
# ON_DEMAND_TIME = 0x10
|
||||
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING
|
||||
CAPABILITIES=0x17
|
||||
|
||||
# Accuracy threshold for intermediate positions
|
||||
# less accurate positions are ignored, 0 for passing all positions
|
||||
# ACCURACY_THRES=5000
|
||||
|
||||
################################
|
||||
##### AGPS server settings #####
|
||||
################################
|
||||
|
||||
# FOR SUPL SUPPORT, set the following
|
||||
# SUPL_HOST=supl.host.com or IP
|
||||
# SUPL_PORT=1234
|
||||
|
||||
# FOR MO SUPL SUPPORT, set the following
|
||||
# MO_SUPL_HOST=supl.host.com or IP
|
||||
# MO_SUPL_PORT=1234
|
||||
|
||||
# FOR C2K PDE SUPPORT, set the following
|
||||
# C2K_HOST=c2k.pde.com or IP
|
||||
# C2K_PORT=1234
|
||||
|
||||
# Bitmask of slots that are available
|
||||
# for write/install to, where 1s indicate writable,
|
||||
# and the default value is 0 where no slots
|
||||
# are writable. For example, AGPS_CERT_WRITABLE_MASK
|
||||
# of b1000001010 makes 3 slots available
|
||||
# and the remaining 7 slots unwritable.
|
||||
#AGPS_CERT_WRITABLE_MASK=0
|
||||
|
||||
####################################
|
||||
# LTE Positioning Profile Settings
|
||||
####################################
|
||||
# LPP_PROFILE is a bit mask
|
||||
# 0: Enable RRLP on LTE(Default)
|
||||
# 0x1: LPP User Plane
|
||||
# 0x2: LPP Control Plane
|
||||
# 0x4: LPP User Plane for NR5G
|
||||
# 0x8: LPP Control Plane for NR5G
|
||||
LPP_PROFILE = 2
|
||||
|
||||
####################################
|
||||
#Datum Type
|
||||
####################################
|
||||
# 0: WGS-84
|
||||
# 1: PZ-90
|
||||
DATUM_TYPE = 0
|
||||
|
||||
################################
|
||||
# EXTRA SETTINGS
|
||||
################################
|
||||
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
||||
NMEA_PROVIDER=0
|
||||
|
||||
################################
|
||||
# NMEA TAG BLOCK GROUPING
|
||||
################################
|
||||
# NMEA tag block grouping is only applicable to GSA
|
||||
# Default is disabled
|
||||
# 0 - disabled
|
||||
# 1 - enabled
|
||||
NMEA_TAG_BLOCK_GROUPING_ENABLED = 0
|
||||
|
||||
# Customized NMEA GGA fix quality that can be used to tell
|
||||
# whether SENSOR contributed to the fix.
|
||||
#
|
||||
# When this configuration item is not enabled (set to any value that is not 1),
|
||||
# GGA fix quality conforms to NMEA standard spec as below:
|
||||
# PPP/DGNSS/SBAS correction fix w/ or w/o sensor: 2
|
||||
# RTK fixed fix w/ or w/o sensor: 4
|
||||
# RTK float fix w/ or w/o sensor: 5
|
||||
# SPE fix w/ or w/o sensor: 1
|
||||
# Sensor dead reckoning fix: 6
|
||||
#
|
||||
# When this configuration is enabled (set to 1), GGA fix quality
|
||||
# will be output as below:
|
||||
# PPP fix w/o sensor: 59, w/ sensor: 69
|
||||
# DGNSS/SBAS correction fix w/o sensor: 2, w/ sensor: 62
|
||||
# RTK fixed fix w/o sensor: 4, w/ sensor: 64
|
||||
# RTK float fix w/o sensor: 5, w/ sensor: 65,
|
||||
# SPE fix w/o sensor: 1, and w/ sensor: 61
|
||||
# Sensor dead reckoning fix: 6
|
||||
#
|
||||
# any value that is not 1 - disabled
|
||||
# 1 - enabled
|
||||
CUSTOM_NMEA_GGA_FIX_QUALITY_ENABLED = 0
|
||||
|
||||
################################
|
||||
# NMEA Reporting Rate Config, valid only when NMEA_PROVIDER is set to "0"
|
||||
################################
|
||||
# NMEA Reporting Rate
|
||||
# Set it to "1HZ" for 1Hz NMEA Reporting
|
||||
# Set it to "NHZ" for NHz NMEA Reporting
|
||||
#Default : NHZ (overridden by position update rate if set to lower rates)
|
||||
NMEA_REPORT_RATE=NHZ
|
||||
|
||||
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
||||
SGLTE_TARGET=0
|
||||
|
||||
##################################################
|
||||
# Select Positioning Protocol on A-GLONASS system
|
||||
##################################################
|
||||
# 0x1: RRC CPlane
|
||||
# 0x2: RRLP UPlane
|
||||
# 0x4: LLP Uplane
|
||||
A_GLONASS_POS_PROTOCOL_SELECT = 0
|
||||
|
||||
##################################################
|
||||
# Select technology for LPPe Control Plane
|
||||
##################################################
|
||||
# 0x1: DBH for LPPe CP
|
||||
# 0x2: WLAN AP Measurements for LPPe CP
|
||||
# 0x4: SRN AP measurement for CP
|
||||
# 0x8: Sensor Barometer Measurement LPPe CP
|
||||
#LPPE_CP_TECHNOLOGY = 0
|
||||
|
||||
##################################################
|
||||
# Select technology for LPPe User Plane
|
||||
##################################################
|
||||
# 0x1: DBH for LPPe UP
|
||||
# 0x2: WLAN AP Measurements for LPPe UP
|
||||
# 0x4: SRN AP measurement for UP
|
||||
# 0x8: Sensor Barometer Measurement LPPe UP
|
||||
#LPPE_UP_TECHNOLOGY = 0
|
||||
|
||||
##################################################
|
||||
# AGPS_CONFIG_INJECT
|
||||
##################################################
|
||||
# enable/disable injection of AGPS configurations:
|
||||
# SUPL_VER
|
||||
# SUPL_HOST
|
||||
# SUPL_PORT
|
||||
# MO_SUPL_HOST
|
||||
# MO_SUPL_PORT
|
||||
# C2K_HOST
|
||||
# C2K_PORT
|
||||
# LPP_PROFILE
|
||||
# A_GLONASS_POS_PROTOCOL_SELECT
|
||||
# 0: disable
|
||||
# 1: enable
|
||||
AGPS_CONFIG_INJECT = 1
|
||||
|
||||
##################################################
|
||||
# GNSS settings for automotive use cases
|
||||
# Configurations in following section are
|
||||
# specific to automotive use cases, others
|
||||
# please do not change, keep the default values
|
||||
##################################################
|
||||
|
||||
# AP Coarse Timestamp Uncertainty
|
||||
##################################################
|
||||
# default : 10
|
||||
# AP time stamp uncertainty, until GNSS receiver
|
||||
# is able to acquire better timing information
|
||||
AP_TIMESTAMP_UNCERTAINTY = 10
|
||||
|
||||
#####################################
|
||||
# DR_SYNC Pulse Availability
|
||||
#####################################
|
||||
# 0 : DR_SYNC pulse not available (default)
|
||||
# 1 : DR_SYNC pulse available
|
||||
# This configuration enables the driver to make use
|
||||
# of PPS events generated by DR_SYNC pulse
|
||||
# Standard Linux PPS driver needs to be enabled
|
||||
DR_SYNC_ENABLED = 0
|
||||
|
||||
#####################################
|
||||
# PPS Device name
|
||||
#####################################
|
||||
PPS_DEVICENAME = /dev/pps0
|
||||
|
||||
#####################################
|
||||
# Ignore PPS at Startup and after long outage
|
||||
#####################################
|
||||
IGNORE_PPS_PULSE_COUNT = 1
|
||||
|
||||
#####################################
|
||||
# Long GNSS RF outage in seconds
|
||||
#####################################
|
||||
GNSS_OUTAGE_DURATION = 10
|
||||
|
||||
#####################################
|
||||
# AP Clock Accuracy
|
||||
#####################################
|
||||
# Quality of APPS processor clock (in PPM).
|
||||
# Value specified is used for calculation of
|
||||
# APPS time stamp uncertainty
|
||||
AP_CLOCK_PPM = 100
|
||||
|
||||
#####################################
|
||||
# MAX ms difference to detect missing pulse
|
||||
#####################################
|
||||
# Specifies time threshold in ms to validate any missing PPS pulses
|
||||
MISSING_PULSE_TIME_DELTA = 900
|
||||
|
||||
#####################################
|
||||
# Propagation time uncertainty
|
||||
#####################################
|
||||
# This settings enables time uncertainty propagation
|
||||
# logic incase of missing PPS pulse
|
||||
PROPAGATION_TIME_UNCERTAINTY = 1
|
||||
|
||||
#######################################
|
||||
# APN / IP Type Configuration
|
||||
# APN and IP Type to use for setting
|
||||
# up WWAN call.
|
||||
# Use below values for IP Type:
|
||||
# v4 = 4
|
||||
# v6 = 6
|
||||
# v4v6 = 10
|
||||
#######################################
|
||||
# INTERNET_APN = abc.xyz
|
||||
# INTERNET_IP_TYPE = 4
|
||||
# SUPL_APN = abc.xyz
|
||||
# SUPL_IP_TYPE = 4
|
||||
|
||||
#####################################
|
||||
# Modem type
|
||||
#####################################
|
||||
# This setting configures modem type
|
||||
# (external=0 or internal=1)
|
||||
# comment out the next line to vote
|
||||
# for the first modem in the list
|
||||
MODEM_TYPE = 1
|
||||
|
||||
##################################################
|
||||
# CONSTRAINED TIME UNCERTAINTY MODE
|
||||
##################################################
|
||||
# 0 : disabled (default)
|
||||
# 1 : enabled
|
||||
# This setting enables GPS engine to keep its time
|
||||
# uncertainty below the specified constraint
|
||||
#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0
|
||||
|
||||
# If constrained time uncertainty mode is enabled,
|
||||
# this setting specifies the time uncertainty
|
||||
# threshold that gps engine need to maintain.
|
||||
# In unit of milli-seconds.
|
||||
# Default is 0.0 meaning that modem default value
|
||||
# of time uncertainty threshold will be used.
|
||||
#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0
|
||||
|
||||
# If constrained time uncertainty mode is enabled,
|
||||
# this setting specifies the power budget that
|
||||
# gps engine is allowed to spend to maintain the time
|
||||
# uncertainty.
|
||||
# Default is 0 meaning that GPS engine is not constained
|
||||
# by power budget and can spend as much power as needed.
|
||||
# In unit of 0.1 milli watt second.
|
||||
#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0
|
||||
|
||||
##################################################
|
||||
# POSITION ASSISTED CLOCK ESTIMATOR
|
||||
##################################################
|
||||
# 0 : disabled (default)
|
||||
# 1 : enabled
|
||||
# This setting enables GPS engine to estimate clock
|
||||
# bias and drift when the signal from at least 1
|
||||
# SV is available and the UE’s position is known by
|
||||
# other position engines.
|
||||
#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0
|
||||
|
||||
#####################################
|
||||
# proxyAppPackageName
|
||||
#####################################
|
||||
# This is a string that is sent to the framework
|
||||
# in nfwNotifyCb callback
|
||||
#ifndef OPLUS_BUG_STABILITY
|
||||
#LiZhilong@CONNECTIVITY.GPS.LOCATION.OPCUSTOMIZED.2786815, 2020/01/10, Modify for nfw proxy app
|
||||
#PROXY_APP_PACKAGE_NAME = com.google.android.carrierlocation
|
||||
#else /* OPLUS_BUG_STABILITY */
|
||||
PROXY_APP_PACKAGE_NAME = com.oplus.locationproxy
|
||||
#endif /* OPLUS_BUG_STABILITY */
|
||||
|
||||
#####################################
|
||||
# CP_MTLR_ES
|
||||
#####################################
|
||||
# CP MTLR ES, 1=enable, 0=disable
|
||||
CP_MTLR_ES=0
|
||||
|
||||
##################################################
|
||||
# GNSS_DEPLOYMENT
|
||||
##################################################
|
||||
# 0 : Enable QTI GNSS (default)
|
||||
# 1 : Enable QCSR SS5
|
||||
# 2 : Enable PDS API
|
||||
# This setting use to select between QTI GNSS,
|
||||
# QCSR SS5 hardware receiver, and PDS API.
|
||||
# By default QTI GNSS receiver is enabled.
|
||||
# GNSS_DEPLOYMENT = 0
|
||||
|
||||
##################################################
|
||||
## LOG BUFFER CONFIGURATION
|
||||
##################################################
|
||||
#LOG_BUFFER_ENABLED, 1=enable, 0=disable
|
||||
#*_LEVEL_TIME_DEPTH, maximum time depth of level *
|
||||
#in log buffer, unit is second
|
||||
#*_LEVEL_MAX_CAPACITY, maximum numbers of level *
|
||||
#log print sentences in log buffer
|
||||
LOG_BUFFER_ENABLED = 0
|
||||
E_LEVEL_TIME_DEPTH = 600
|
||||
E_LEVEL_MAX_CAPACITY = 50
|
||||
W_LEVEL_TIME_DEPTH = 500
|
||||
W_LEVEL_MAX_CAPACITY = 100
|
||||
I_LEVEL_TIME_DEPTH = 400
|
||||
I_LEVEL_MAX_CAPACITY = 200
|
||||
D_LEVEL_TIME_DEPTH = 30
|
||||
D_LEVEL_MAX_CAPACITY = 300
|
||||
V_LEVEL_TIME_DEPTH = 200
|
||||
V_LEVEL_MAX_CAPACITY = 400
|
||||
|
||||
##################################################
|
||||
# Allow buffer diag log packets when diag memory allocation
|
||||
# fails during boot up time.
|
||||
##################################################
|
||||
BUFFER_DIAG_LOGGING = 1
|
||||
|
||||
#######################################
|
||||
# NTRIP CLIENT LIBRARY NAME
|
||||
#######################################
|
||||
# NTRIP_CLIENT_LIB_NAME =
|
||||
|
||||
##################################################
|
||||
# Correction Data Framework settings
|
||||
# Default values:
|
||||
# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
|
||||
# CDFW_INJECT_DATA_INTERVAL = 600000 //10 mins
|
||||
# CDFW_RTCM_MESSAGE_INTERVAL = 1000 //1 second
|
||||
#
|
||||
# If multiple sources coexist on a PL,
|
||||
# the prorioty sequence can be set by the integer number.
|
||||
# PRIORITY_1 is higher than PRIORITY_2, for example,
|
||||
# CDFW_SOURCE_PRIORITY_1 = INTERNAL_1 RTCM
|
||||
# CDFW_SOURCE_PRIORITY_2 = CV2X RTCM
|
||||
##################################################
|
||||
|
||||
##################################################
|
||||
# RF LOSS
|
||||
# The loss in 0.1 dbHz from the C/N0 at the antenna port
|
||||
# These values must be configured by OEM if not
|
||||
# supported in QMI LOC message
|
||||
# There is one entry for each signal type
|
||||
##################################################
|
||||
RF_LOSS_GPS = 0
|
||||
RF_LOSS_GPS_L5 = 0
|
||||
RF_LOSS_GLO_LEFT = 0
|
||||
RF_LOSS_GLO_CENTER = 0
|
||||
RF_LOSS_GLO_RIGHT = 0
|
||||
RF_LOSS_BDS = 0
|
||||
RF_LOSS_BDS_B2A = 0
|
||||
RF_LOSS_GAL = 0
|
||||
RF_LOSS_GAL_E5 = 0
|
||||
RF_LOSS_NAVIC = 0
|
||||
5
proprietary/vendor/etc/init/android.hardware.bluetooth@1.0-service-qti.rc
vendored
Normal file
5
proprietary/vendor/etc/init/android.hardware.bluetooth@1.0-service-qti.rc
vendored
Normal file
@@ -0,0 +1,5 @@
|
||||
service vendor.bluetooth-1-0-qti /vendor/bin/hw/android.hardware.bluetooth@1.0-service-qti
|
||||
class hal
|
||||
user bluetooth
|
||||
group bluetooth system wakelock oem_2901 net_raw
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN
|
||||
8
proprietary/vendor/etc/init/android.hardware.drm@1.1-service.wfdhdcp.rc
vendored
Normal file
8
proprietary/vendor/etc/init/android.hardware.drm@1.1-service.wfdhdcp.rc
vendored
Normal file
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2018-2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service wfdhdcphalservice /vendor/bin/wfdhdcphalservice
|
||||
class main
|
||||
user system
|
||||
4
proprietary/vendor/etc/init/android.hardware.gatekeeper@1.0-service-qti.rc
vendored
Normal file
4
proprietary/vendor/etc/init/android.hardware.gatekeeper@1.0-service-qti.rc
vendored
Normal file
@@ -0,0 +1,4 @@
|
||||
service gatekeeper-1-0 /vendor/bin/hw/android.hardware.gatekeeper@1.0-service-qti
|
||||
class early_hal
|
||||
user system
|
||||
group system
|
||||
4
proprietary/vendor/etc/init/android.hardware.gnss@2.1-service-qti.rc
vendored
Normal file
4
proprietary/vendor/etc/init/android.hardware.gnss@2.1-service-qti.rc
vendored
Normal file
@@ -0,0 +1,4 @@
|
||||
service gnss_service /vendor/bin/hw/android.hardware.gnss@2.1-service-qti
|
||||
class hal
|
||||
user gps
|
||||
group system gps radio vendor_qti_diag
|
||||
7
proprietary/vendor/etc/init/android.hardware.keymaster@4.0-service-qti.rc
vendored
Normal file
7
proprietary/vendor/etc/init/android.hardware.keymaster@4.0-service-qti.rc
vendored
Normal file
@@ -0,0 +1,7 @@
|
||||
on init
|
||||
start keymaster-4-0
|
||||
|
||||
service keymaster-4-0 /vendor/bin/hw/android.hardware.keymaster@4.0-service-qti
|
||||
class early_hal
|
||||
user system
|
||||
group system drmrpc
|
||||
14
proprietary/vendor/etc/init/android.hardware.neuralnetworks@1.3-service-qti.rc
vendored
Normal file
14
proprietary/vendor/etc/init/android.hardware.neuralnetworks@1.3-service-qti.rc
vendored
Normal file
@@ -0,0 +1,14 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service neuralnetworks_hal_service /vendor/bin/hw/android.hardware.neuralnetworks@1.3-service-qti
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
writepid /dev/stune/nnapi-hal/tasks
|
||||
|
||||
#Below changes moved from init.target.rc as part of go/FR53051
|
||||
on post-fs-data
|
||||
mkdir /data/vendor/nnhal 0700 system system
|
||||
4
proprietary/vendor/etc/init/cnd.rc
vendored
Normal file
4
proprietary/vendor/etc/init/cnd.rc
vendored
Normal file
@@ -0,0 +1,4 @@
|
||||
service vendor.cnd /system/vendor/bin/cnd
|
||||
class main
|
||||
user system
|
||||
group system wifi inet radio wakelock net_admin
|
||||
11
proprietary/vendor/etc/init/com.qualcomm.qti.wifidisplayhal@1.0-service.rc
vendored
Normal file
11
proprietary/vendor/etc/init/com.qualcomm.qti.wifidisplayhal@1.0-service.rc
vendored
Normal file
@@ -0,0 +1,11 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service wifidisplayhalservice /vendor/bin/wifidisplayhalservice
|
||||
class main
|
||||
user system
|
||||
group inet input audio media uhid
|
||||
capabilities NET_RAW
|
||||
|
||||
13
proprietary/vendor/etc/init/dataadpl.rc
vendored
Normal file
13
proprietary/vendor/etc/init/dataadpl.rc
vendored
Normal file
@@ -0,0 +1,13 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
# Create the directories used by DPM subsystem
|
||||
|
||||
#start dataadpl service
|
||||
service vendor.dataadpl /system/vendor/bin/adpl
|
||||
class main
|
||||
user radio
|
||||
socket adpl_cmd_uds_file dgram 660 radio radio
|
||||
group radio oem_2901 diag usb inet
|
||||
disabled
|
||||
19
proprietary/vendor/etc/init/dataqti.rc
vendored
Normal file
19
proprietary/vendor/etc/init/dataqti.rc
vendored
Normal file
@@ -0,0 +1,19 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
# Create the directories used by DPM subsystem
|
||||
|
||||
# msm specific files that need to be created on /data
|
||||
on post-fs-data
|
||||
#Create DATAQTI dir for logs
|
||||
mkdir /data/vendor/dataqti 0770 radio radio
|
||||
chmod 0770 /data/vendor/dataqti
|
||||
|
||||
#start dataqti service
|
||||
service vendor.dataqti /system/vendor/bin/qti
|
||||
class main
|
||||
user radio
|
||||
socket qti_dpm_uds_file dgram 660 radio radio
|
||||
group radio oem_2901 diag usb inet
|
||||
disabled
|
||||
17
proprietary/vendor/etc/init/dpmQmiMgr.rc
vendored
Normal file
17
proprietary/vendor/etc/init/dpmQmiMgr.rc
vendored
Normal file
@@ -0,0 +1,17 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
#start dpmQmiMgr service
|
||||
service dpmQmiMgr /system/vendor/bin/dpmQmiMgr
|
||||
interface com.qualcomm.qti.dpm.api@1.0::IdpmQmi dpmQmiService
|
||||
class main
|
||||
user system
|
||||
group system
|
||||
disabled
|
||||
|
||||
on property:persist.vendor.dpmhalservice.enable=*
|
||||
start dpmQmiMgr
|
||||
|
||||
on property:persist.vendor.dpmhalservice.enable=0
|
||||
stop dpmQmiMgr
|
||||
19
proprietary/vendor/etc/init/feature_enabler_client.rc
vendored
Normal file
19
proprietary/vendor/etc/init/feature_enabler_client.rc
vendored
Normal file
@@ -0,0 +1,19 @@
|
||||
on post-fs-data
|
||||
mkdir /mnt/vendor/persist/data/pfm 0755 system system
|
||||
mkdir /mnt/vendor/persist/data/pfm/licenses 0755 system system
|
||||
chown system system /mnt/vendor/persist/feature_enabler_client
|
||||
chmod 0775 /mnt/vendor/persist/feature_enabler_client
|
||||
|
||||
service feature_enabler_client /vendor/bin/feature_enabler_client
|
||||
class late_start
|
||||
user system
|
||||
group system graphics
|
||||
|
||||
on property:init.svc.vendor.qti.hardware.display.composer=stopping
|
||||
stop feature_enabler_client
|
||||
|
||||
on property:init.svc.vendor.qti.hardware.display.composer=running
|
||||
start feature_enabler_client
|
||||
|
||||
on property:init.svc.vendor.qti.hardware.display.composer=restarting
|
||||
restart feature_enabler_client
|
||||
13
proprietary/vendor/etc/init/ims_rtp_daemon.rc
vendored
Normal file
13
proprietary/vendor/etc/init/ims_rtp_daemon.rc
vendored
Normal file
@@ -0,0 +1,13 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
# imsdatadaemon starts with root and UID will be downgraded to RADIO.
|
||||
service vendor.ims_rtp_daemon /vendor/bin/ims_rtp_daemon
|
||||
class main
|
||||
user radio
|
||||
group radio vendor_qti_diag inet log
|
||||
|
||||
on property:vendor.ims.DATA_DAEMON_STATUS=1
|
||||
restart vendor.ims_rtp_daemon
|
||||
15
proprietary/vendor/etc/init/imsdatadaemon.rc
vendored
Normal file
15
proprietary/vendor/etc/init/imsdatadaemon.rc
vendored
Normal file
@@ -0,0 +1,15 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
# imsdatadaemon starts with root and UID will be downgraded to RADIO.
|
||||
service vendor.imsdatadaemon /vendor/bin/imsdatadaemon
|
||||
class main
|
||||
user radio
|
||||
socket ims_datad stream 0660 system radio
|
||||
group radio wifi inet vendor_qti_diag log
|
||||
disabled
|
||||
|
||||
on property:vendor.ims.QMI_DAEMON_STATUS=1
|
||||
start vendor.imsdatadaemon
|
||||
10
proprietary/vendor/etc/init/imsqmidaemon.rc
vendored
Normal file
10
proprietary/vendor/etc/init/imsqmidaemon.rc
vendored
Normal file
@@ -0,0 +1,10 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service vendor.imsqmidaemon /vendor/bin/imsqmidaemon
|
||||
class main
|
||||
user radio
|
||||
socket ims_qmid stream 0660 system radio
|
||||
group radio vendor_qti_diag log
|
||||
8
proprietary/vendor/etc/init/imsrcsd.rc
vendored
Normal file
8
proprietary/vendor/etc/init/imsrcsd.rc
vendored
Normal file
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service vendor.imsrcsservice /vendor/bin/imsrcsd
|
||||
class main
|
||||
user radio
|
||||
group radio vendor_qti_diag log inet wakelock
|
||||
2
proprietary/vendor/etc/init/init-qcril-data.rc
vendored
Normal file
2
proprietary/vendor/etc/init/init-qcril-data.rc
vendored
Normal file
@@ -0,0 +1,2 @@
|
||||
on property:ro.board.platform=msmnile && property:ro.baseband=msm && property:ro.vendor.qti.va_aosp.support=1
|
||||
setprop ro.telephony.iwlan_operation_mode "legacy"
|
||||
14
proprietary/vendor/etc/init/init.time_daemon.rc
vendored
Normal file
14
proprietary/vendor/etc/init/init.time_daemon.rc
vendored
Normal file
@@ -0,0 +1,14 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on post-fs-data && property:ro.crypto.state=encrypted && property:ro.crypto.type=file
|
||||
start time_daemon
|
||||
|
||||
service time_daemon /vendor/bin/time_daemon
|
||||
class main
|
||||
user system
|
||||
group system
|
||||
capabilities SYS_TIME
|
||||
56
proprietary/vendor/etc/init/init.vendor.sensors.rc
vendored
Normal file
56
proprietary/vendor/etc/init/init.vendor.sensors.rc
vendored
Normal file
@@ -0,0 +1,56 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# # Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# # Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# # Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
on early-boot
|
||||
|
||||
write /sys/kernel/boot_slpi/boot 1
|
||||
#yajie.chen@BSP.Sensor, 2020/07/20, Add for recovery sensors dir
|
||||
exec u:r:vendor_qti_init_shell:s0 -- /odm/bin/sensor_recover.sh
|
||||
chown system system /mnt/vendor/persist/sensors
|
||||
chown system system /mnt/vendor/persist/sensors/sns.reg
|
||||
chown system system /mnt/vendor/persist/sensors/sensors_list.txt
|
||||
chown system system /mnt/vendor/persist/sensors/registry
|
||||
chown system system /mnt/vendor/persist/sensors/registry/registry
|
||||
chown system system /mnt/vendor/persist/sensors/registry/registry/sensors_registry
|
||||
chown system system /mnt/vendor/persist/sensors/sensors_settings
|
||||
chown system system /mnt/vendor/persist/sensors/registry/sns_reg_config
|
||||
chown system system /mnt/vendor/persist/sensors/registry/sns_reg_version
|
||||
chown system system /mnt/vendor/persist/sensors/registry/config
|
||||
chmod 0664 /mnt/vendor/persist/sensors/sensors_settings
|
||||
chown system system /sys/kernel/boot_adsp/ssr
|
||||
chmod 0664 /dev/ssc_interactive
|
||||
chown system system /dev/ssc_interactive
|
||||
|
||||
on post-fs-data && property:ro.build.type=userdebug
|
||||
#sensors log dir
|
||||
|
||||
mkdir /data/vendor/sensors 0777 system system
|
||||
mkdir /data/vendor/sensors/scripts 0777 system system
|
||||
17
proprietary/vendor/etc/init/init_thermal-engine.rc
vendored
Normal file
17
proprietary/vendor/etc/init/init_thermal-engine.rc
vendored
Normal file
@@ -0,0 +1,17 @@
|
||||
#! /bin/sh
|
||||
#
|
||||
#Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
#All Rights Reserved.
|
||||
#Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
#Copyright (c) 2013-2018, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
|
||||
service thermal-engine /vendor/bin/thermal-engine
|
||||
class main
|
||||
user root
|
||||
group root
|
||||
socket thermal-send-client stream 0660 system oem_2907
|
||||
socket thermal-recv-client stream 0660 system oem_2907
|
||||
socket thermal-recv-passive-client stream 0660 system oem_2907
|
||||
socket thermal-send-rule stream 0660 system oem_2907
|
||||
8
proprietary/vendor/etc/init/ipa_fws.rc
vendored
Normal file
8
proprietary/vendor/etc/init/ipa_fws.rc
vendored
Normal file
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on early-boot
|
||||
write /dev/ipa 1
|
||||
|
||||
6
proprietary/vendor/etc/init/mutualex.rc
vendored
Normal file
6
proprietary/vendor/etc/init/mutualex.rc
vendored
Normal file
@@ -0,0 +1,6 @@
|
||||
service vendor.mutualex /vendor/bin/mutualex
|
||||
class main
|
||||
user radio
|
||||
group radio wakelock wifi inet
|
||||
capabilities BLOCK_SUSPEND
|
||||
oneshot
|
||||
81
proprietary/vendor/etc/init/netmgrd.rc
vendored
Normal file
81
proprietary/vendor/etc/init/netmgrd.rc
vendored
Normal file
@@ -0,0 +1,81 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on boot
|
||||
#Create NETMGR daemon socket area
|
||||
mkdir /dev/socket/netmgr 0750 radio radio
|
||||
|
||||
#Assign TCP buffer thresholds to be ceiling value of technology maximums
|
||||
#Increased technology maximums should be reflected here.
|
||||
write /proc/sys/net/core/rmem_max 16777216
|
||||
write /proc/sys/net/core/wmem_max 8388608
|
||||
|
||||
#Load rmnet_core driver
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_ctl
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_core
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_ctl
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_core
|
||||
|
||||
on boot
|
||||
#Reduce the pressure on the reassemly cache by discarding orphan fragments quicker
|
||||
write /proc/sys/net/netfilter/nf_conntrack_frag6_timeout 10
|
||||
|
||||
# msm specific files that need to be created on /data
|
||||
on post-fs-data
|
||||
#Create NETMGR daemon log dir
|
||||
mkdir /data/vendor/netmgr 0770 radio radio
|
||||
chmod 0770 /data/vendor/netmgr
|
||||
|
||||
# Create netmgr recovery folder
|
||||
mkdir /data/vendor/netmgr/recovery 0700 radio radio
|
||||
chmod 0770 /data/vendor/netmgr/recovery
|
||||
write /data/vendor/netmgr/recovery/recovery_info ""
|
||||
chown radio radio /data/vendor/netmgr/recovery/recovery_info
|
||||
|
||||
# Manage netmgrd based on value of property
|
||||
on property:persist.vendor.data.mode=disabled
|
||||
stop vendor.netmgrd
|
||||
|
||||
service vendor.netmgrd /system/vendor/bin/netmgrd
|
||||
class main
|
||||
|
||||
on property:ro.vendor.use_data_netmgrd=false
|
||||
# netmgr not supported on specific target
|
||||
stop vendor.netmgrd
|
||||
|
||||
on property:ro.baseband=apq
|
||||
stop vendor.netmgrd
|
||||
|
||||
on property:persist.vendor.data.shs_ko_load=1
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_shs
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_shs
|
||||
|
||||
on property:persist.vendor.data.shs_ko_load=0
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules rmnet_shs
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules/5.4-gki rmnet_shs
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=3
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules rmnet_perf rmnet_perf_ingress_deag=N
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules/5.4-gki rmnet_perf rmnet_perf_ingress_deag=N
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=2
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules rmnet_perf rmnet_perf_opt_mode="udp"
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -d /vendor/lib/modules/5.4-gki rmnet_perf rmnet_perf_opt_mode="udp"
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=1
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_perf
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_perf
|
||||
|
||||
on property:persist.vendor.data.perf_ko_load=0
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules rmnet_perf
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules/5.4-gki rmnet_perf
|
||||
|
||||
on property:persist.vendor.data.offload_ko_load=1
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules rmnet_offload
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules/5.4-gki rmnet_offload
|
||||
|
||||
on property:persist.vendor.data.offload_ko_load=0
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules rmnet_offload
|
||||
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -r -d /vendor/lib/modules/5.4-gki rmnet_offload
|
||||
20
proprietary/vendor/etc/init/port-bridge.rc
vendored
Normal file
20
proprietary/vendor/etc/init/port-bridge.rc
vendored
Normal file
@@ -0,0 +1,20 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on boot
|
||||
#Create PORT-BRIDGE daemon socket area
|
||||
mkdir /dev/socket/port-bridge 0750 radio radio
|
||||
|
||||
# msm specific files that need to be created on /data
|
||||
on post-fs-data
|
||||
#Create port-bridge log dir
|
||||
mkdir /data/vendor/port_bridge 0770 radio radio
|
||||
chmod 0770 /data/vendor/port_bridge
|
||||
|
||||
service vendor.port-bridge /system/vendor/bin/port-bridge
|
||||
class main
|
||||
user radio
|
||||
group radio system inet
|
||||
oneshot
|
||||
36
proprietary/vendor/etc/init/qcrild.rc
vendored
Normal file
36
proprietary/vendor/etc/init/qcrild.rc
vendored
Normal file
@@ -0,0 +1,36 @@
|
||||
service vendor.qcrild /vendor/bin/hw/qcrild
|
||||
class main
|
||||
user radio
|
||||
disabled
|
||||
#ifdef OPLUS_FEATURE_OEM_QMI
|
||||
#TanZhengpeng@NETWORK.REG.919197, 2016/06/04, modify for Oem qmi service
|
||||
#group radio cache inet misc audio log readproc wakelock oem_2901
|
||||
#else /* OPLUS_FEATURE_OEM_QMI */
|
||||
group radio cache inet misc audio log readproc wakelock oem_2901 net_raw system root
|
||||
#endif /* OPLUS_FEATURE_OEM_QMI */
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW
|
||||
|
||||
service vendor.qcrild2 /vendor/bin/hw/qcrild -c 2
|
||||
class main
|
||||
user radio
|
||||
disabled
|
||||
#ifdef OPLUS_FEATURE_OEM_QMI
|
||||
#TanZhengpeng@NETWORK.REG.919197, 2016/06/04, modify for Oem qmi service
|
||||
#group radio cache inet misc audio log readproc wakelock oem_2901
|
||||
#else /* OPLUS_FEATURE_OEM_QMI */
|
||||
group radio cache inet misc audio log readproc wakelock oem_2901 net_raw system root
|
||||
#endif /* OPLUS_FEATURE_OEM_QMI */
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW
|
||||
|
||||
service vendor.qcrild3 /vendor/bin/hw/qcrild -c 3
|
||||
class main
|
||||
user radio
|
||||
disabled
|
||||
#ifdef OPLUS_FEATURE_OEM_QMI
|
||||
#TanZhengpeng@NETWORK.REG.919197, 2016/06/04, modify for Oem qmi service
|
||||
#group radio cache inet misc audio log readproc wakelock oem_2901
|
||||
#else /* OPLUS_FEATURE_OEM_QMI */
|
||||
group radio cache inet misc audio log readproc wakelock oem_2901 net_raw system root
|
||||
#endif /* OPLUS_FEATURE_OEM_QMI */
|
||||
|
||||
capabilities BLOCK_SUSPEND NET_ADMIN NET_RAW
|
||||
20
proprietary/vendor/etc/init/qmipriod.rc
vendored
Normal file
20
proprietary/vendor/etc/init/qmipriod.rc
vendored
Normal file
@@ -0,0 +1,20 @@
|
||||
# Copyright (c) 2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
service vendor.qmipriod /system/vendor/bin/qmipriod
|
||||
class main
|
||||
user radio
|
||||
group radio
|
||||
disabled
|
||||
|
||||
on property:persist.vendor.data.qmipriod_load=1
|
||||
start vendor.qmipriod
|
||||
|
||||
on property:persist.vendor.data.qmipriod_load=0
|
||||
stop vendor.qmipriod
|
||||
|
||||
on post-fs-data
|
||||
#Create logging directory
|
||||
mkdir /data/vendor/qmipriod 0770 radio radio
|
||||
chmod 0770 /data/vendor/qmipriod
|
||||
12
proprietary/vendor/etc/init/qseecomd.rc
vendored
Normal file
12
proprietary/vendor/etc/init/qseecomd.rc
vendored
Normal file
@@ -0,0 +1,12 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
on init
|
||||
wait /dev/qseecom
|
||||
start vendor.qseecomd
|
||||
|
||||
service vendor.qseecomd /vendor/bin/qseecomd
|
||||
class core
|
||||
user root
|
||||
group root
|
||||
27
proprietary/vendor/etc/init/shsusrd.rc
vendored
Normal file
27
proprietary/vendor/etc/init/shsusrd.rc
vendored
Normal file
@@ -0,0 +1,27 @@
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
on boot
|
||||
# Create netmgr recovery folder
|
||||
write /data/vendor/shsusr/shsusr_log.txt ""
|
||||
chown radio radio /data/vendor/shsusr/shsusr_log.txt
|
||||
|
||||
# msm specific files that need to be created on /data
|
||||
on post-fs-data
|
||||
#Create SHSUSR daemon log dir
|
||||
mkdir /data/vendor/shsusr 0770 radio radio
|
||||
chmod 0770 /data/vendor/shsusr
|
||||
|
||||
service vendor.shsusrd /system/vendor/bin/shsusrd 0x002819000
|
||||
class main
|
||||
user radio
|
||||
group radio
|
||||
disabled
|
||||
|
||||
on property:persist.vendor.data.shsusr_load=1
|
||||
start vendor.shsusrd
|
||||
|
||||
on property:persist.vendor.data.shsusr_load=0
|
||||
stop vendor.shsusrd
|
||||
21
proprietary/vendor/etc/init/ssgtzd.rc
vendored
Normal file
21
proprietary/vendor/etc/init/ssgtzd.rc
vendored
Normal file
@@ -0,0 +1,21 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
|
||||
|
||||
# Create the directories used by qwes
|
||||
on post-fs-data
|
||||
mkdir /data/vendor/qwes 0755 system system
|
||||
|
||||
# Start daemon after boot completed
|
||||
on property:sys.boot_completed=1
|
||||
start vendor.ssgtzd
|
||||
|
||||
# Used 'disabled' flag, so daemon won't be started until explicit start
|
||||
service vendor.ssgtzd /vendor/bin/ssgtzd
|
||||
class late_start
|
||||
user system
|
||||
group system
|
||||
disabled
|
||||
socket ssgtzd stream 0660 system inet
|
||||
socket qwes_ipc stream 0660 system inet
|
||||
4
proprietary/vendor/etc/init/vendor.display.color@1.0-service.rc
vendored
Normal file
4
proprietary/vendor/etc/init/vendor.display.color@1.0-service.rc
vendored
Normal file
@@ -0,0 +1,4 @@
|
||||
service display-color-hal-1-0 /vendor/bin/hw/vendor.display.color@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
9
proprietary/vendor/etc/init/vendor.oplus.hardware.cameraMDM@1.0-service.rc
vendored
Normal file
9
proprietary/vendor/etc/init/vendor.oplus.hardware.cameraMDM@1.0-service.rc
vendored
Normal file
@@ -0,0 +1,9 @@
|
||||
service vendor.opluscamera-mdm-1-0 /vendor/bin/hw/vendor.oplus.hardware.cameraMDM@1.0-service
|
||||
class hal
|
||||
user cameraserver
|
||||
group audio camera input drmrpc sdcard_rw system
|
||||
|
||||
on post-fs
|
||||
chmod 0666 /dev/cpuset/background/cpus
|
||||
chmod 0666 /dev/cpuset/foreground/cpus
|
||||
chmod 0666 /dev/cpuset/camera-app/cpus
|
||||
46
proprietary/vendor/etc/init/vendor.qti.adsprpc-service.rc
vendored
Normal file
46
proprietary/vendor/etc/init/vendor.qti.adsprpc-service.rc
vendored
Normal file
@@ -0,0 +1,46 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
#
|
||||
# Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
service vendor.adsprpcd /vendor/bin/adsprpcd
|
||||
class main
|
||||
user system
|
||||
group media
|
||||
|
||||
service vendor.adsprpcd_audiopd /vendor/bin/adsprpcd audiopd
|
||||
class main
|
||||
user media
|
||||
group media
|
||||
#ifdef OPLUS_FEATURE_KTV
|
||||
#Xiong.Hu@MULTIMEDIA.AUDIODRIVER.ADSP,2020/09/22, Add ADSP_LIBRARY_PATH new path
|
||||
setenv ADSP_LIBRARY_PATH ";/system/lib/rfsa/adsp;/system/vendor/lib/rfsa/adsp;/dsp;/vendor/dsp;/odm/lib/rfsa/adsp;/vendor/lib/rfsa/adsp"
|
||||
#endif /* OPLUS_FEATURE_KTV */
|
||||
40
proprietary/vendor/etc/init/vendor.qti.cdsprpc-service.rc
vendored
Normal file
40
proprietary/vendor/etc/init/vendor.qti.cdsprpc-service.rc
vendored
Normal file
@@ -0,0 +1,40 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
#
|
||||
# Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
service vendor.cdsprpcd /vendor/bin/cdsprpcd
|
||||
class main
|
||||
user system
|
||||
group system
|
||||
|
||||
on property:vendor.fastrpc.disable.cdsprpcd.daemon=1
|
||||
stop vendor.cdsprpcd
|
||||
11
proprietary/vendor/etc/init/vendor.qti.hardware.alarm@1.0-service.rc
vendored
Normal file
11
proprietary/vendor/etc/init/vendor.qti.hardware.alarm@1.0-service.rc
vendored
Normal file
@@ -0,0 +1,11 @@
|
||||
# Copyright (c) 2017 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service alarm-hal-1-0 /vendor/bin/hw/vendor.qti.hardware.alarm@1.0-service
|
||||
interface vendor.qti.hardware.alarm@1.0::IAlarm default
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
oneshot
|
||||
disabled
|
||||
8
proprietary/vendor/etc/init/vendor.qti.hardware.capabilityconfigstore@1.0-service.rc
vendored
Normal file
8
proprietary/vendor/etc/init/vendor.qti.hardware.capabilityconfigstore@1.0-service.rc
vendored
Normal file
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service vendor.capabilityconfigstore /vendor/bin/hw/vendor.qti.hardware.capabilityconfigstore@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
43
proprietary/vendor/etc/init/vendor.qti.hardware.charger_monitor@1.0-service.rc
vendored
Normal file
43
proprietary/vendor/etc/init/vendor.qti.hardware.charger_monitor@1.0-service.rc
vendored
Normal file
@@ -0,0 +1,43 @@
|
||||
# Copyright (c) 2019-2020, Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2013-2018, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
|
||||
service vendor.hvdcp_opti /vendor/bin/hvdcp_opti
|
||||
class main
|
||||
user system
|
||||
group system wakelock
|
||||
capabilities BLOCK_SUSPEND WAKE_ALARM
|
||||
disabled
|
||||
|
||||
service vendor.qti-chg-policy-sh /vendor/bin/init.qti.chg_policy.sh
|
||||
class core
|
||||
user root
|
||||
oneshot
|
||||
disabled
|
||||
|
||||
on boot
|
||||
enable vendor.qti-chg-policy-sh
|
||||
start vendor.qti-chg-policy-sh
|
||||
|
||||
on charger
|
||||
chown radio wakelock /sys/power/wake_lock
|
||||
chmod 0660 /sys/power/wake_lock
|
||||
chown radio wakelock /sys/power/wake_unlock
|
||||
chmod 0660 /sys/power/wake_unlock
|
||||
mkdir /mnt/vendor/persist/hvdcp_opti 0770 root system
|
||||
mount_all /vendor/etc/charger_fstab.qti --early
|
||||
enable vendor.qti-chg-policy-sh
|
||||
start vendor.qti-chg-policy-sh
|
||||
|
||||
on property:persist.vendor.hvdcp_opti.start=2
|
||||
rmdir /mnt/vendor/persist/hvdcp_opti
|
||||
setprop persist.vendor.hvdcp_opti.start 0
|
||||
|
||||
on property:persist.vendor.hvdcp_opti.start=1
|
||||
mkdir /mnt/vendor/persist/hvdcp_opti 0770 root system
|
||||
enable vendor.hvdcp_opti
|
||||
start vendor.hvdcp_opti
|
||||
setprop persist.vendor.hvdcp_opti.start 0
|
||||
13
proprietary/vendor/etc/init/vendor.qti.hardware.perf@2.2-service.rc
vendored
Normal file
13
proprietary/vendor/etc/init/vendor.qti.hardware.perf@2.2-service.rc
vendored
Normal file
@@ -0,0 +1,13 @@
|
||||
# @file vendor.qti.hardware.perf@2.2-service.rc
|
||||
# @brief Defination perf service
|
||||
#
|
||||
# DESCRIPTION
|
||||
# ---------------------------------------------------------------------------
|
||||
# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
# ---------------------------------------------------------------------------
|
||||
service perf-hal-2-2 /vendor/bin/hw/vendor.qti.hardware.perf@2.2-service
|
||||
class hal
|
||||
user root
|
||||
group root readproc oem_2907
|
||||
14
proprietary/vendor/etc/init/vendor.qti.hardware.qseecom@1.0-service.rc
vendored
Normal file
14
proprietary/vendor/etc/init/vendor.qti.hardware.qseecom@1.0-service.rc
vendored
Normal file
@@ -0,0 +1,14 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
#
|
||||
|
||||
on init
|
||||
start qseecom-service
|
||||
|
||||
service qseecom-service /vendor/bin/hw/vendor.qti.hardware.qseecom@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system drmrpc
|
||||
4
proprietary/vendor/etc/init/vendor.qti.hardware.qteeconnector@1.0-service.rc
vendored
Normal file
4
proprietary/vendor/etc/init/vendor.qti.hardware.qteeconnector@1.0-service.rc
vendored
Normal file
@@ -0,0 +1,4 @@
|
||||
service qteeconnector-hal-1-0 /vendor/bin/hw/vendor.qti.hardware.qteeconnector@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
8
proprietary/vendor/etc/init/vendor.qti.hardware.sensorscalibrate@1.0-service.rc
vendored
Normal file
8
proprietary/vendor/etc/init/vendor.qti.hardware.sensorscalibrate@1.0-service.rc
vendored
Normal file
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2017 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service sensorscal-hal-1-0 /vendor/bin/hw/vendor.qti.hardware.sensorscalibrate@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system
|
||||
8
proprietary/vendor/etc/init/vendor.qti.hardware.soter@1.0-service.rc
vendored
Normal file
8
proprietary/vendor/etc/init/vendor.qti.hardware.soter@1.0-service.rc
vendored
Normal file
@@ -0,0 +1,8 @@
|
||||
# Copyright (c) 2018 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
service soter-1-0 /vendor/bin/hw/vendor.qti.hardware.soter@1.0-service
|
||||
class hal
|
||||
user system
|
||||
group system drmrpc
|
||||
4
proprietary/vendor/etc/init/vendor.qti.hardware.tui_comm@1.0-service-qti.rc
vendored
Normal file
4
proprietary/vendor/etc/init/vendor.qti.hardware.tui_comm@1.0-service-qti.rc
vendored
Normal file
@@ -0,0 +1,4 @@
|
||||
service tui_comm-1-0 /vendor/bin/hw/vendor.qti.hardware.tui_comm@1.0-service-qti
|
||||
class hal
|
||||
user system
|
||||
group system drmrpc
|
||||
11
proprietary/vendor/etc/init/vendor.qti.rmt_storage.rc
vendored
Normal file
11
proprietary/vendor/etc/init/vendor.qti.rmt_storage.rc
vendored
Normal file
@@ -0,0 +1,11 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
service vendor.rmt_storage /vendor/bin/rmt_storage
|
||||
class core
|
||||
user root
|
||||
shutdown critical
|
||||
ioprio rt 0
|
||||
13
proprietary/vendor/etc/init/vendor.qti.tftp.rc
vendored
Normal file
13
proprietary/vendor/etc/init/vendor.qti.tftp.rc
vendored
Normal file
@@ -0,0 +1,13 @@
|
||||
#
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
|
||||
# Create pddump directory
|
||||
on post-fs-data
|
||||
mkdir /data/vendor/pddump 0770 oem_2903 oem_2903
|
||||
|
||||
service vendor.tftp_server /vendor/bin/tftp_server
|
||||
class core
|
||||
user root
|
||||
40
proprietary/vendor/etc/init/vendor.sensors.qti.rc
vendored
Normal file
40
proprietary/vendor/etc/init/vendor.sensors.qti.rc
vendored
Normal file
@@ -0,0 +1,40 @@
|
||||
# Copyright (c) 2019 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2009-2012, 2014-2019, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are met:
|
||||
# # Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# # Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in the
|
||||
# documentation and/or other materials provided with the distribution.
|
||||
# # Neither the name of The Linux Foundation nor
|
||||
# the names of its contributors may be used to endorse or promote
|
||||
# products derived from this software without specific prior written
|
||||
# permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
||||
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||||
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
||||
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
||||
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||||
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
service vendor.sensors.qti /vendor/bin/sensors.qti
|
||||
class core
|
||||
user system
|
||||
group system
|
||||
|
||||
service vendor-sensor-sh /vendor/bin/init.qcom.sensors.sh
|
||||
class late_start
|
||||
user root
|
||||
oneshot
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user