avicii: Import vendor from AC2003_11_F.18

proprietary/vendor/bin/init.mdm.sh

@@ -0,0 +1,34 @@
+#! /vendor/bin/sh
+
+# Copyright (c) 2013, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of Linux Foundation nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+baseband=`getprop ro.baseband`
+if [ "$baseband" = "mdm" ] || [ "$baseband" = "mdm2" ]; then
+	start vendor.mdm_helper
+fi
+

proprietary/vendor/bin/init.qcom.sensors.sh

@@ -0,0 +1,33 @@
+#!/vendor/bin/sh
+# Copyright (c) 2020 The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of The Linux Foundation nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# Function to start sensors for SSC enabled platforms
+#
+cp /vendor/etc/sensors/scripts/* /data/vendor/sensors/scripts/
+chmod a+rw /data/vendor/sensors/scripts/*

proprietary/vendor/bin/init.qti.chg_policy.sh

@@ -0,0 +1,48 @@
+#! /vendor/bin/sh
+
+#
+# Copyright (c) 2019-2020 Qualcomm Technologies, Inc.
+# All Rights Reserved.
+# Confidential and Proprietary - Qualcomm Technologies, Inc.
+#
+# Copyright (c) 2019 The Linux Foundation. All rights reserved.
+#
+
+export PATH=/vendor/bin
+
+soc_id=`getprop ro.vendor.qti.soc_id`
+if [ "$soc_id" -eq 415 ] || [ "$soc_id" -eq 439 ] || [ "$soc_id" -eq 450 ] || [ "$soc_id" -eq 475 ]; then
+    setprop persist.vendor.hvdcp_opti.start 2
+    exit 0
+fi
+
+if [ "$soc_id" -eq 441 ] || [ "$soc_id" -eq 471 ]; then
+	#Scuba does not support usb-pd or charge pumps
+	find /sys/class/power_supply/battery/ -type f  -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/bms/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/main/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/usb/ -type f -maxdepth 1 | xargs chown system.system
+else
+	find /sys/class/power_supply/battery/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/bms/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/main/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/usb/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/charge_pump_master/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/pc_port/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/dc/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/power_supply/parallel/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/usbpd/usbpd0/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/qc-vdm/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/charge_pump/ -type f -maxdepth 1 | xargs chown system.system
+	find /sys/class/qcom-battery/ -type f -maxdepth 1 | xargs chown system.system
+
+	for i in 0 1 2 3 4 5 6 7 8 9
+	do
+		devname=`cat /sys/bus/iio/devices/iio:device$i/name`
+		if [[ "$devname" == *smb* ]] || [[ "$devname" == *qg* ]] || [[ "$devname" == *div2_cp* ]]; then
+			find /sys/bus/iio/devices/iio:device$i/ -type f -maxdepth 1 | xargs chown system.system
+		fi
+	done
+fi
+
+setprop persist.vendor.hvdcp_opti.start 1

proprietary/vendor/etc/ArmHDCP_QTI_Android.cfg

@@ -0,0 +1,130 @@
+#Main logging indication
+EnableLogs=True
+
+#Debug detailing level
+#if commented \ removed it will use default: full info
+# 0 - nothing
+# 3 - critical errors
+# 5 - critical info
+# 10 - errors
+# 30 - warnings
+# 40 - info
+# 50 - additional info
+# 60 - full info
+DebugLevel=40
+
+#Directory of HDCP TrustZone application file
+#Uncomment the following line in order to override system default value
+#ifdef VENDOR_EDIT
+#Long.Liu@BSP.Fingerprint.Secure , 2020/06/08, modify for HDCP ta PATH
+TzAppPath=/odm/vendor/firmware
+#TzAppPath=/vendor/firmware
+#endif
+
+#Secure File System path.
+#In Arm HDCP versions prior to 4.0.0, this parameter was named "UserRootDir".
+#Unless required for backward compatibility, Arm recommends not to change the value of this parameter.
+#SfsPath=/persist/data
+
+#Enable / Disable file logs. If set to "False" - file logs will be disabled
+UseLogFile=False
+LogPath=/data/local/tmp
+LogFileName=hdcp.log
+LogFileMaxSize=52428800
+MaxNumOfLogFiles=40
+
+#Merge the client logs into logcat
+#comment out \ remove to disable
+LogcatLogs=True
+
+#Enable stdout logs. For production devices, this parameter must be set to False
+StdoutLogs=False
+
+#HLOS data dir, comment out \ remove to enable default value (/data/system)
+HlosDataDir = /data/system
+
+#Set True/False
+#Set value for capbiliy mask : TRANSMITTER_LOCALITY_PRECOMPUTE_SUPPORT_BIT_MASK and RECEIVER_LOCALITY_PRECOMPUTE_SUPPORT_BIT_MASK as part of spcification. Default value is True.
+IsLocalityCheckPreComputeSupported=True
+
+#Transmitter only - number of Max LC retries, for any reason. This should not exceed the spcification 1023 re-attempts. For the total number of attempts, add 1 to this parameter.
+#if commented \ removed it will use default (1023)
+TotalLcRetries=1023
+
+#Transmitter only - number of LC retries, out of the total TotalLcRetries, which are due to LC_SEND_L_PRIME not arrived in pre-compute mode, or due to cryptographic failured caused by a LC_SEND_L_PRIME arriving in delay, 
+# or wrong LC_SEND_L_PRIME content
+#These retries are subset of the total retries in TotalLcRetries, so this parameter should be always less than the maximum specification allowed 1023 retries, but must also be less than TotalLcRetries
+#This parameter will leave total number of TotalLcRetries-HlosLcTimeoutRetries retries due to the case of message arrived too late (more than 7ms, verified in TEE)
+HlosLcTimeoutRetries=9
+#for locality check with pre-compute capability - time for retry in soruce (in HLOS), in case that no message received from sink
+LcPreComputeHlosTimeout=100
+
+#overall connection timeout
+#remove \ comment to use default (10000)
+UpstreamOverallAuthenticationTimeout=10000
+DownsOverallAuthenticationTimeout=10000
+
+#Avoid HDCP timeouts - Possible in testing Keys only. May be used for debug purposes. All HDCP protocol timeouts will be avoided, excluding receiver timeouts will HDCP 2.2 Transmitter is working with HDCP 2.0 receiver. 
+#Secure timestamp checking in Locality check and propagations will be avoided too.
+AvoidTimeouts=False
+
+# Override the default TEE service logging mechanism. Any combination of True/False is valid.
+# The settings is secondary. Leave undefined to use platform defaults (recommended!)
+TeeNativeLogging=False
+TeeSerializedLogging=True
+
+# Logger Queue number of slots
+# The value should be power of 2 that is greater than or equal to 128 (i.e 128, 256, 512 ...)
+# Default value 4096
+LoggerQueueSize=4096
+
+# When IsSinkDualModeEnabled is True, the sink can switch between repeater and receiver
+# depending if it has populated topology beneath it. When IsSinkDualModeEnabled is False,
+# the sink will always identify itself as a repeater and if there is no devices beneath it,
+# it will have zero-size receiver ID list in its topology.
+# Default is True.
+IsSinkDualModeEnabled=True
+
+# When SinkSendVPrimeMSB is True, Sink sends the most significant 128-bits of V' during upstream
+# propagation, as required by the HDCP specification. When SinkSendVPrimeMSB is False, Sink sends
+# the least significant 128-bits of V' during upstream propagation, inconsistently with the HDCP
+# specification, but without compromising security. This allows Sink to work against 3rd party
+# devices who violate the HDCP specification.
+# Default is False.
+SinkSendVPrimeMSB=False
+
+# Size (in bytes) for hlos-ptr shared memory. Default: 2097152 (2MB)
+# When EArmHdcpBufferType::ARM_HDCP_BUFFER_TYPE_VIRTUAL_POINTER type is used for cipher buffers, an intermediate ION buffer should be allocated.
+# Size of the pre-allocated ION buffer is defined by SizeBytesForHlosPtrAsSharedMemRef value.
+# If SizeBytesForHlosPtrAsSharedMemRef is set to 0, cipher calls with EArmHdcpBufferType::ARM_HDCP_BUFFER_TYPE_VIRTUAL_POINTER type will fail.
+# When using Google WFD with libstagefright_hdcp.so this parameter should be set to 2 * maximum needed buffer size per encrypt operation and rounded up to 4096 bytes boundary
+SizeBytesForHlosPtrAsSharedMemRef=0
+
+# Optional ION buffer parameters
+
+# When SizeBytesForHlosPtrAsSharedMemRef > 0, the following parameters used for pre-allocated ION buffer allocation.
+# Note: HDCP test application require SizeBytesForHlosPtrAsSharedMemRef=2097152
+
+# Non-secure ION heap ID. Default: 27   (27=ION_QSECOM_HEAP_ID)
+# NON_SECURE_ION_HEAP_ID=27
+
+# Alignment in KB for non-secure buffer allocation using ION heap. Default: 4
+# NON_SECURE_ION_HEAP_ALIGN_KB=4
+
+# Non-secure ION buffer allocation flags. Default: 0
+# NON_SECURE_ION_HEAP_FLAGS=0
+
+# The following parameters used for secure ION buffers allocation (for test purpose only)
+
+# Secure ION heap ID. Default: 9   (9=ION_SECURE_HEAP_ID)
+# TEST_SECURE_ION_HEAP_ID=9
+
+# Alignment in KB for secure buffer allocation using ION heap. Default: 4
+# TEST_SECURE_ION_HEAP_ALIGN_KB=4
+
+# Secure ION buffer allocation flags. Default: 2147745792 (2147745792 = 0x80040000 = (ION_SECURE | ION_FLAG_CP_BITSTREAM))
+# TEST_SECURE_ION_HEAP_FLAGS=2147745792
+
+# TEST_SECURE_ION_HEAP_USE_TAG_MEM can be False (Default) or True
+# Set TEST_SECURE_ION_HEAP_USE_TAG_MEM to 1 to enforce qsee_tag_mem(AC_VM_CP_BITSTREAM, ...) call for each allocated ION secure buffer
+# TEST_SECURE_ION_HEAP_USE_TAG_MEM=False

proprietary/vendor/etc/Oppo_QC_LTM_Commercial_2020_01_03.pfm

@@ -0,0 +1,60 @@
+{
+  "licenseOEMIDs" : 81,
+  "licenseFeaturesIds" : [ "1000" ],
+  "licenseHardwareVersions" : [ "0x600D0100" ],
+  "licenseeName" : "Oppo QC LTM Commercial License for SM7250"
+}
+
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+-----BEGIN CERTIFICATE-----
+MIIERTCCAv2gAwIBAgIVdqMEQ1j41p18D3AfzC1TDxRDgyKzMD0GCSqGSIb3DQEB
+CjAwoA0wCwYJYIZIAWUDBAIBoRowGAYJKoZIhvcNAQEIMAsGCWCGSAFlAwQCAaID
+AgEgMIGAMSQwIgYDVQQKDBtRdWFsY29tbSBUZWNobm9sb2dpZXMsIEluYy4xKjAo
+BgNVBAsMIVF1YWxjb21tIENyeXB0b2dyYXBoaWMgT3BlcmF0aW9uczEsMCoGA1UE
+AwwjRmVhdHVyZSBMaWNlbnNlIEF0dGVzdGF0aW9uIFJvb3QgQ0EwHhcNMTgxMjE0
+MDAwMDAxWhcNMjgxMjEzMjM1OTU5WjBvMSQwIgYDVQQKDBtRdWFsY29tbSBUZWNo
+bm9sb2dpZXMsIEluYy4xKjAoBgNVBAsMIVF1YWxjb21tIENyeXB0b2dyYXBoaWMg
+T3BlcmF0aW9uczEbMBkGA1UEAwwSQ0hMU0UgU2lnbmluZyBDZXJ0MIIBIjANBgkq
+hkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA7TyI/YJ2Mfipye29tcEW/jtWS/6sCgKK
+ogvkmeHBM07h3CwYDFBOBg+MqgqzNUpygj3wJ5ahLkG/HmxNg3CSXeIVlTt+cEZh
+ie0TW+s/rxi4ODLQ9v+UAoDszB0bk8gOd8HGs6CtKXCONDx/W3PSGn/+hTWpqE2G
+PsH4EqjI2uegyw4xMxO78iC9adn7fOGZFec1HaL4KmrWe+Vqg1KLIYx55ZrQFq5h
+/vP+hKlWSZP/HtY3knlQ2DcqickRAhz//C8wsxso+pjKdHHfDers0W02kzL0Cljk
+OpJedpnjd+JHLprysuEShJQ5vDIC48fsj5qwy315uyfpXOYcII2qOQIDAQABo2Yw
+ZDASBgNVHRMBAf8ECDAGAQH/AgEAMA4GA1UdDwEB/wQEAwIChDAdBgNVHQ4EFgQU
+hxTpNzJ+vbYo/DBqYCQQMNi9524wHwYDVR0jBBgwFoAU8kGYj4IIg0uJcAYVO7al
+Tpt5aAgwPQYJKoZIhvcNAQEKMDCgDTALBglghkgBZQMEAgGhGjAYBgkqhkiG9w0B
+AQgwCwYJYIZIAWUDBAIBogMCASADggEBAIlYDO7RnIdPDozvWshfuvQ3VawcjGSm
+KLJGp11MxM2Kd5SPTVT+uisLntJ6CY+FNdCc7zF2F9Va36rlIKYzqNBsmtOHF6Nf
+RBEssoJb5Tq81ZYDM5wsG+CMtS8wZ09M0ObkixzZFePidF/NIfPx1cj/FXEyosZ8
+lC0VXF8DG90waxrhY5W/ziBJTy7BTFNlgdMFw/wP+Wm+1PzqPESnDcgKr2D8lYGY
+kyP2AUNEmQkr/P2wqjYmFwUl8Fu6vyfXXLrBD3DN+MprdUP2d+fxr6kcVfjikzfU
+ZkHrvWqUb3z63I2NMPXnoDq3ZcN+1eE15JqfFk68Z6gNh3qjcFyaI0g=
+-----END CERTIFICATE-----

proprietary/vendor/etc/Oppo_QC_LTM_Commercial_SM7225_2021_01_08.pfm

@@ -0,0 +1,62 @@
+{
+  "licenseOEMIDs" : 81,
+  "licenseFeaturesIds" : [ "1000" ],
+  "licenseHardwareVersions" : [ "0x60120100" ],
+  "licensePKHashes" : [ "0xA8F2DA95B44958141FCFF74F47469B145F57E2E6C1064046BF78EDFFDF20C150" ],
+  "licenseeName" : "Oppo QC LTM Commercial License for SM7225"
+}
+
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

proprietary/vendor/etc/apdr.conf

@@ -0,0 +1,188 @@
+# AP DR SENSOR Configuration file
+#
+# SENSOR_SERVICE options are one of below
+#   accel,gyro,vehicle_accel,vehicle_gyro,pedometer,vehicle_odometry,accel_temp,
+#   gyro_temp,baro,mag_calib,mag_uncalib,amd,rmd.
+#
+# SENSOR_PROVIDER options is one of -- default,native,ssc,samlite.
+#
+# SENSOR_RATE = 1~100 (Hz)
+#
+# SENSOR_SAMPLES = 1~N
+#
+# SENSOR_STATISTIC_ENABLED
+#  bit 0: Diag Print Enabled
+#  bit 1: Adb  Print Enabled
+# SENSOR_STATISTIC_PRINT_COUNT
+#  Skip Number of Print
+#
+# QDR_DYNAMIC_LOADING = 1~3
+# Configure QDR library to be loaded
+#   1: QDR3
+#   2: QDR2-GYRO
+#   3: QDR2-DWT
+#
+#
+
+######################################
+#                                    #
+#   QDR3 Configuration               #
+#                                    #
+# For QDR3,                          #
+# comment default configuration above#
+# and                                #
+# uncomment below configuration      #
+# settings.                          #
+#                                    #
+######################################
+#
+SENSOR_SERVICE = accel
+SENSOR_PROVIDER = native
+SENSOR_RATE = 10
+SENSOR_SAMPLES = 10
+#
+SENSOR_SERVICE = vehicle_speed
+SENSOR_PROVIDER = native
+SENSOR_RATE = 100
+SENSOR_SAMPLES = 1
+#
+SENSOR_SERVICE = gyro
+SENSOR_PROVIDER = native
+SENSOR_RATE = 10
+SENSOR_SAMPLES = 10
+#
+SENSOR_SERVICE = vehicle_gear
+SENSOR_PROVIDER = native
+SENSOR_RATE = 100
+SENSOR_SAMPLES = 1
+#
+SENSOR_SERVICE = accel_temp
+SENSOR_PROVIDER = native
+SENSOR_RATE = 1
+SENSOR_SAMPLES = 1
+#
+#
+##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
+QDR_DYNAMIC_LOADING = 1
+##Specify CAN sensor type: Valid Options: 14(ODO), 2(ODO_DWT), 3(ODO_DWS)
+QDR_CAN_TYPE = 14
+##Reporting offset before PPS boundary
+QDR_REPORTING_OFFSET = 20
+#
+##QDR_ENABLE_QG shall be set as 1
+QDR_ENABLE_QG = 1
+#GEAR Optimisation
+QG_GEAR_ON_CHANGE=1
+#
+
+##Vehicle Sensor Configuration (CAN data availability)
+##QDR_VEH_SENSOR_CONFIG:
+##   0: VEHICLE_SENSOR_PRESENT  - Vehicle Sensor is available (DEFAULT)
+##   1: VEHICLE_SENSOR_OPTIONAL - Vehicle Sensor may or may not be present.
+#QDR_VEH_SENSOR_CONFIG = 0
+
+##Select Wheel set (E.g.: Front two wheels, Rear two wheels OR All four wheels)
+##To be used for differential wheel tick OR speed service.
+##This configuration is applicable when QDR_CAN_TYPE configured as
+##ODO_DWS(3) or ODO_DWT(2).
+##Value "0": Use Front two wheels
+##Value "1": Use Rear two wheels
+##Value "2": Use All four wheels
+#QG_DRIVE_WHEEL_FW_RW_AW = 2
+##Max Wheel tick value above which wheel tick rolls over
+##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
+#QG_DWT_MAX_WHEEL_TICK_COUNT = 255.0
+##Configure Wheel constant for DWT based below equation
+##(2 * pi * WHEEL_RADIUS / Pulses Per revolution)
+##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
+#QG_DWT_WHEEL_CONSTANT = 0.044
+#
+
+######################################
+#                                    #
+#   QDR2-DWT Configuration           #
+#                                    #
+# For QDR2-DWT,                      #
+# comment default configuration above#
+# and                                #
+# uncomment below configuration      #
+# settings.                          #
+#                                    #
+######################################
+#
+#SENSOR_SERVICE = vehicle_speed
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#SENSOR_STATISTIC_ENABLED = 3
+#SENSOR_STATISTIC_PRINT_COUNT = 50
+#
+#SENSOR_SERVICE = vehicle_dws
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#SENSOR_STATISTIC_ENABLED = 3
+#SENSOR_STATISTIC_PRINT_COUNT = 50
+#
+#SENSOR_SERVICE = vehicle_gear
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#SENSOR_STATISTIC_ENABLED = 3
+#SENSOR_STATISTIC_PRINT_COUNT = 50
+#
+#GNSS_POS_STATISTIC_ENABLED = 3
+#GNSS_POS_STATISTIC_PRNTCNT = 10
+#GNSS_MSR_STATISTIC_ENABLED = 3
+#GNSS_MSR_STATISTIC_PRNTCNT = 10
+#
+##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
+#QDR_DYNAMIC_LOADING = 3
+##Enable/disable sensor data flashback feature
+#QDR_FLASHBACK_ENABLED = 0
+##Enable/disable sensor data batching feature
+#QDR_BATCHING_ENABLED = 0
+##Reporting offset before PPS boundary
+#QDR_REPORTING_OFFSET = 20
+##Sensor dispatch threshold declaration
+#QDR_SENSDISPATCH_MS = 30
+
+
+######################################
+#                                    #
+#   QDR2-GYRO Configuration          #
+#                                    #
+# For QDR2-GYRO,                     #
+# comment default configuration above#
+# and                                #
+# uncomment below configuration      #
+# settings.                          #
+#                                    #
+######################################
+#
+#SENSOR_SERVICE = vehicle_speed
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#
+#SENSOR_SERVICE = vehicle_gyro
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#
+#SENSOR_SERVICE = vehicle_gear
+#SENSOR_PROVIDER = native
+#SENSOR_RATE = 100
+#SENSOR_SAMPLES = 1
+#
+##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
+#QDR_DYNAMIC_LOADING = 2
+##Enable/disable sensor data flashback feature
+#QDR_FLASHBACK_ENABLED = 0
+##Enable/disable sensor data batching feature
+#QDR_BATCHING_ENABLED = 0
+##Reporting offset before PPS boundary
+#QDR_REPORTING_OFFSET = 20
+##Sensor dispatch threshold declaration
+#QDR_SENSDISPATCH_MS = 30
+#

proprietary/vendor/etc/cacert_location.pem

@@ -0,0 +1,551 @@
+COG
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+Entrust.net Secure Server Certification Authority
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+Entrust Certification Authority (2048)
+-----BEGIN CERTIFICATE-----
+MIIEKjCCAxKgAwIBAgIEOGPe+DANBgkqhkiG9w0BAQUFADCBtDEUMBIGA1UEChMLRW50cnVzdC5u
+ZXQxQDA+BgNVBAsUN3d3dy5lbnRydXN0Lm5ldC9DUFNfMjA0OCBpbmNvcnAuIGJ5IHJlZi4gKGxp
+bWl0cyBsaWFiLikxJTAjBgNVBAsTHChjKSAxOTk5IEVudHJ1c3QubmV0IExpbWl0ZWQxMzAxBgNV
+BAMTKkVudHJ1c3QubmV0IENlcnRpZmljYXRpb24gQXV0aG9yaXR5ICgyMDQ4KTAeFw05OTEyMjQx
+NzUwNTFaFw0yOTA3MjQxNDE1MTJaMIG0MRQwEgYDVQQKEwtFbnRydXN0Lm5ldDFAMD4GA1UECxQ3
+d3d3LmVudHJ1c3QubmV0L0NQU18yMDQ4IGluY29ycC4gYnkgcmVmLiAobGltaXRzIGxpYWIuKTEl
+MCMGA1UECxMcKGMpIDE5OTkgRW50cnVzdC5uZXQgTGltaXRlZDEzMDEGA1UEAxMqRW50cnVzdC5u
+ZXQgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkgKDIwNDgpMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8A
+MIIBCgKCAQEArU1LqRKGsuqjIAcVFmQqK0vRvwtKTY7tgHalZ7d4QMBzQshowNtTK91euHaYNZOL
+Gp18EzoOH1u3Hs/lJBQesYGpjX24zGtLA/ECDNyrpUAkAH90lKGdCCmziAv1h3edVc3kw37XamSr
+hRSGlVuXMlBvPci6Zgzj/L24ScF2iUkZ/cCovYmjZy/Gn7xxGWC4LeksyZB2ZnuU4q941mVTXTzW
+nLLPKQP5L6RQstRIzgUyVYr9smRMDuSYB3Xbf9+5CFVghTAp+XtIpGmG4zU/HoZdenoVve8AjhUi
+VBcAkCaTvA5JaJG/+EfTnZVCwQ5N328mz8MYIWJmQ3DW1cAH4QIDAQABo0IwQDAOBgNVHQ8BAf8E
+BAMCAQYwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUVeSB0RGAvtiJuQijMfmhJAkWuXAwDQYJ
+KoZIhvcNAQEFBQADggEBADubj1abMOdTmXx6eadNl9cZlZD7Bh/KM3xGY4+WZiT6QBshJ8rmcnPy
+T/4xmf3IDExoU8aAghOY+rat2l098c5u9hURlIIM7j+VrxGrD9cv3h8Dj1csHsm7mhpElesYT6Yf
+zX1XEC+bBAlahLVu2B064dae0Wx5XnkcFMXj0EyTO2U87d89vqbllRrDtRnDvV5bu/8j72gZyxKT
+J1wDLW8w0B62GqzeWvfRqqgnpv55gcR5mTNXuhKwqeBCbJPKVt7+bYQLCIt+jerXmCHG8+c8eS9e
+nNFMFY3h7CI3zJpDC5fcgJCNs2ebb0gIFVbPv/ErfF6adulZkMV8gzURZVE=
+-----END CERTIFICATE-----
+
+
+Entrust Root Certification Authority
+-----BEGIN CERTIFICATE-----
+MIIEkTCCA3mgAwIBAgIERWtQVDANBgkqhkiG9w0BAQUFADCBsDELMAkGA1UEBhMC
+VVMxFjAUBgNVBAoTDUVudHJ1c3QsIEluYy4xOTA3BgNVBAsTMHd3dy5lbnRydXN0
+Lm5ldC9DUFMgaXMgaW5jb3Jwb3JhdGVkIGJ5IHJlZmVyZW5jZTEfMB0GA1UECxMW
+KGMpIDIwMDYgRW50cnVzdCwgSW5jLjEtMCsGA1UEAxMkRW50cnVzdCBSb290IENl
+cnRpZmljYXRpb24gQXV0aG9yaXR5MB4XDTA2MTEyNzIwMjM0MloXDTI2MTEyNzIw
+NTM0MlowgbAxCzAJBgNVBAYTAlVTMRYwFAYDVQQKEw1FbnRydXN0LCBJbmMuMTkw
+NwYDVQQLEzB3d3cuZW50cnVzdC5uZXQvQ1BTIGlzIGluY29ycG9yYXRlZCBieSBy
+ZWZlcmVuY2UxHzAdBgNVBAsTFihjKSAyMDA2IEVudHJ1c3QsIEluYy4xLTArBgNV
+BAMTJEVudHJ1c3QgUm9vdCBDZXJ0aWZpY2F0aW9uIEF1dGhvcml0eTCCASIwDQYJ
+KoZIhvcNAQEBBQADggEPADCCAQoCggEBALaVtkNC+sZtKm9I35RMOVcF7sN5EUFo
+Nu3s/poBj6E4KPz3EEZmLk0eGrEaTsbRwJWIsMn/MYszA9u3g3s+IIRe7bJWKKf4
+4LlAcTfFy0cOlypowCKVYhXbR9n10Cv/gkvJrT7eTNuQgFA/CYqEAOwwCj0Yzfv9
+KlmaI5UXLEWeH25DeW0MXJj+SKfFI0dcXv1u5x609mhF0YaDW6KKjbHjKYD+JXGI
+rb68j6xSlkuqUY3kEzEZ6E5Nn9uss2rVvDlUccp6en+Q3X0dgNmBu1kmwhH+5pPi
+94DkZfs0Nw4pgHBNrziGLp5/V6+eF67rHMsoIV+2HNjnogQi+dPa2MsCAwEAAaOB
+sDCBrTAOBgNVHQ8BAf8EBAMCAQYwDwYDVR0TAQH/BAUwAwEB/zArBgNVHRAEJDAi
+gA8yMDA2MTEyNzIwMjM0MlqBDzIwMjYxMTI3MjA1MzQyWjAfBgNVHSMEGDAWgBRo
+kORnpKZTgMeGZqTx90tD+4S9bTAdBgNVHQ4EFgQUaJDkZ6SmU4DHhmak8fdLQ/uE
+vW0wHQYJKoZIhvZ9B0EABBAwDhsIVjcuMTo0LjADAgSQMA0GCSqGSIb3DQEBBQUA
+A4IBAQCT1DCw1wMgKtD5Y+iRDAUgqV8ZyntyTtSx29CW+1RaGSwMCPeyvIWonX9t
+O1KzKtvn1ISMY/YPyyYBkVBs9F8U4pN0wBOeMDpQ47RgxRzwIkSNcUesyBrJ6Zua
+AGAT/3B+XxFNSRuzFVJ7yVTav52Vr2ua2J7p8eRDjeIRRDq/r72DQnNSi6q7pynP
+9WQcCk3RvKqsnyrQ/39/2n3qse0wJcGE2jTSW3iDVuycNsMm4hH2Z0kdkquM++v/
+eu6FSqdQgPCnXEqULl8FmTxSQeDNtGPPAUO6nIPcj2A781q0tHuu2guQOHXvgR1m
+0vdXcDazv/wor3ElhVsT/h5/WrQ8
+-----END CERTIFICATE-----
+
+
+
+Entrust Root Certification Authority - G2
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+
+DigiCert Assured ID Root CA
+-----BEGIN CERTIFICATE-----
+MIIDtzCCAp+gAwIBAgIQDOfg5RfYRv6P5WD8G/AwOTANBgkqhkiG9w0BAQUFADBl
+MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
+d3cuZGlnaWNlcnQuY29tMSQwIgYDVQQDExtEaWdpQ2VydCBBc3N1cmVkIElEIFJv
+b3QgQ0EwHhcNMDYxMTEwMDAwMDAwWhcNMzExMTEwMDAwMDAwWjBlMQswCQYDVQQG
+EwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3d3cuZGlnaWNl
+cnQuY29tMSQwIgYDVQQDExtEaWdpQ2VydCBBc3N1cmVkIElEIFJvb3QgQ0EwggEi
+MA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCtDhXO5EOAXLGH87dg+XESpa7c
+JpSIqvTO9SA5KFhgDPiA2qkVlTJhPLWxKISKityfCgyDF3qPkKyK53lTXDGEKvYP
+mDI2dsze3Tyoou9q+yHyUmHfnyDXH+Kx2f4YZNISW1/5WBg1vEfNoTb5a3/UsDg+
+wRvDjDPZ2C8Y/igPs6eD1sNuRMBhNZYW/lmci3Zt1/GiSw0r/wty2p5g0I6QNcZ4
+VYcgoc/lbQrISXwxmDNsIumH0DJaoroTghHtORedmTpyoeb6pNnVFzF1roV9Iq4/
+AUaG9ih5yLHa5FcXxH4cDrC0kqZWs72yl+2qp/C3xag/lRbQ/6GW6whfGHdPAgMB
+AAGjYzBhMA4GA1UdDwEB/wQEAwIBhjAPBgNVHRMBAf8EBTADAQH/MB0GA1UdDgQW
+BBRF66Kv9JLLgjEtUYunpyGd823IDzAfBgNVHSMEGDAWgBRF66Kv9JLLgjEtUYun
+pyGd823IDzANBgkqhkiG9w0BAQUFAAOCAQEAog683+Lt8ONyc3pklL/3cmbYMuRC
+dWKuh+vy1dneVrOfzM4UKLkNl2BcEkxY5NM9g0lFWJc1aRqoR+pWxnmrEthngYTf
+fwk8lOa4JiwgvT2zKIn3X/8i4peEH+ll74fg38FnSbNd67IJKusm7Xi+fT8r87cm
+NW1fiQG2SVufAQWbqz0lwcy2f8Lxb4bG+mRo64EtlOtCt/qMHt1i8b5QZ7dsvfPx
+H2sMNgcWfzd8qVttevESRmCD1ycEvkvOl77DZypoEd+A5wwzZr8TDRRu838fYxAe
++o0bJW1sj6W3YQGx0qMmoRBxna3iw/nDmVG3KwcIzi7mULKn+gpFL6Lw8g==
+-----END CERTIFICATE-----
+
+
+DigiCert Global Root CA
+-----BEGIN CERTIFICATE-----
+MIIDrzCCApegAwIBAgIQCDvgVpBCRrGhdWrJWZHHSjANBgkqhkiG9w0BAQUFADBh
+MQswCQYDVQQGEwJVUzEVMBMGA1UEChMMRGlnaUNlcnQgSW5jMRkwFwYDVQQLExB3
+d3cuZGlnaWNlcnQuY29tMSAwHgYDVQQDExdEaWdpQ2VydCBHbG9iYWwgUm9vdCBD
+QTAeFw0wNjExMTAwMDAwMDBaFw0zMTExMTAwMDAwMDBaMGExCzAJBgNVBAYTAlVT
+MRUwEwYDVQQKEwxEaWdpQ2VydCBJbmMxGTAXBgNVBAsTEHd3dy5kaWdpY2VydC5j
+b20xIDAeBgNVBAMTF0RpZ2lDZXJ0IEdsb2JhbCBSb290IENBMIIBIjANBgkqhkiG
+9w0BAQEFAAOCAQ8AMIIBCgKCAQEA4jvhEXLeqKTTo1eqUKKPC3eQyaKl7hLOllsB
+CSDMAZOnTjC3U/dDxGkAV53ijSLdhwZAAIEJzs4bg7/fzTtxRuLWZscFs3YnFo97
+nh6Vfe63SKMI2tavegw5BmV/Sl0fvBf4q77uKNd0f3p4mVmFaG5cIzJLv07A6Fpt
+43C/dxC//AH2hdmoRBBYMql1GNXRor5H4idq9Joz+EkIYIvUX7Q6hL+hqkpMfT7P
+T19sdl6gSzeRntwi5m3OFBqOasv+zbMUZBfHWymeMr/y7vrTC0LUq7dBMtoM1O/4
+gdW7jVg/tRvoSSiicNoxBN33shbyTApOB6jtSj1etX+jkMOvJwIDAQABo2MwYTAO
+BgNVHQ8BAf8EBAMCAYYwDwYDVR0TAQH/BAUwAwEB/zAdBgNVHQ4EFgQUA95QNVbR
+TLtm8KPiGxvDl7I90VUwHwYDVR0jBBgwFoAUA95QNVbRTLtm8KPiGxvDl7I90VUw
+DQYJKoZIhvcNAQEFBQADggEBAMucN6pIExIK+t1EnE9SsPTfrgT1eXkIoyQY/Esr
+hMAtudXH/vTBH1jLuG2cenTnmCmrEbXjcKChzUyImZOMkXDiqw8cvpOp/2PV5Adg
+06O/nVsJ8dWO41P0jmP6P6fbtGbfYmbW0W5BjfIttep3Sp+dWOIrWcBAI+0tKIJF
+PnlUkiaY4IBIqDfv8NZ5YBberOgOzW6sRBc4L0na4UU+Krk2U886UAb3LujEV0ls
+YSEY1QSteDwsOoBrp+uvFRTp2InBuThs4pFsiv9kuXclVzDAGySj4dzp30d8tbQk
+CAUw7C29C79Fv1C5qfPrmAESrciIxpg0X40KPMbp1ZWVbd4=
+-----END CERTIFICATE-----
+
+
+DigiCert High Assurance EV Root CA
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+VeriSign Class 1 Public Primary Certification Authority
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+VeriSign Class 2 Public Primary Certification Authority
+-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
+
+
+VeriSign Class 3 Public Primary Certification Authority
+-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
+
+
+VeriSign Class 1 Public Primary Certification Authority - G2
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+VeriSign Class 2 Public Primary Certification Authority - G2
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+VeriSign Class 3 Public Primary Certification Authority - G2
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+VeriSign Class 4 Public Primary Certification Authority - G2
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+
+VeriSign Class 1 Public Primary Certification Authority - G3
+-----BEGIN CERTIFICATE-----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==
+-----END CERTIFICATE-----
+
+
+VeriSign Class 2 Public Primary Certification Authority - G3
+-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
+
+
+VeriSign Class 3 Public Primary Certification Authority - G3
+-----BEGIN CERTIFICATE-----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==
+-----END CERTIFICATE-----
+
+
+VeriSign Class 4 Public Primary Certification Authority - G3
+-----BEGIN CERTIFICATE-----
+MIIEGjCCAwICEQDsoKeLbnVqAc/EfMwvlF7XMA0GCSqGSIb3DQEBBQUAMIHKMQsw
+CQYDVQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZl
+cmlTaWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWdu
+LCBJbmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlT
+aWduIENsYXNzIDQgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3Jp
+dHkgLSBHMzAeFw05OTEwMDEwMDAwMDBaFw0zNjA3MTYyMzU5NTlaMIHKMQswCQYD
+VQQGEwJVUzEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xHzAdBgNVBAsTFlZlcmlT
+aWduIFRydXN0IE5ldHdvcmsxOjA4BgNVBAsTMShjKSAxOTk5IFZlcmlTaWduLCBJ
+bmMuIC0gRm9yIGF1dGhvcml6ZWQgdXNlIG9ubHkxRTBDBgNVBAMTPFZlcmlTaWdu
+IENsYXNzIDQgUHVibGljIFByaW1hcnkgQ2VydGlmaWNhdGlvbiBBdXRob3JpdHkg
+LSBHMzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAK3LpRFpxlmr8Y+1
+GQ9Wzsy1HyDkniYlS+BzZYlZ3tCD5PUPtbut8XzoIfzk6AzufEUiGXaStBO3IFsJ
++mGuqPKljYXCKtbeZjbSmwL0qJJgfJxptI8kHtCGUvYynEFYHiK9zUVilQhu0Gbd
+U6LM8BDcVHOLBKFGMzNcF0C5nk3T875Vg+ixiY5afJqWIpA7iCXy0lOIAgwLePLm
+NxdLMEYH5IBtptiWLugs+BGzOA1mppvqySNb247i8xOOGlktqgLw7KSHZtzBP/XY
+ufTsgsbSPZUd5cBPhMnZo0QoBmrXRazwa2rvTl/4EYIeOGM0ZlDUPpNz+jDDZq3/
+ky2X7wMCAwEAATANBgkqhkiG9w0BAQUFAAOCAQEAj/ola09b5KROJ1WrIhVZPMq1
+CtRK26vdoV9TxaBXOcLORyu+OshWv8LZJxA6sQU8wHcxuzrTBXttmhwwjIDLk5Mq
+g6sFUYICABFna/OIYUdfA5PVWw3g8dShMjWFsjrbsIKr0csKvE+MW8VLADsfKoKm
+fjaF3H48ZwC15DtS4KjrXRX5xm3wrR0OhbepmnMUWluPQSjA1egtTaRezarZ7c7c
+2NU8Qh0XwRJdRTjDOPP8hS6DRkiy1yBfkjaP53kPmF6Z6PDQpLv1U70qzlmwr25/
+bLvSHgCwIe34QWKCudiyxLtGUPMxxY8BqHTr9Xgn2uf3ZkPznoM+IKrDNWCRzg==
+-----END CERTIFICATE-----
+
+
+VeriSign Class 3 Public Primary Certification Authority - G4
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+VeriSign Class 3 Public Primary Certification Authority - G5
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+
+
+VeriSign Universal Root Certification Authority
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
+

proprietary/vendor/etc/charger_fstab.qti

@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2019 Qualcomm Technologies, Inc.
+# All Rights Reserved.
+# Confidential and Proprietary - Qualcomm Technologies, Inc.
+#
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+#
+
+# Android fstab file.
+# The filesystem that contains the filesystem checker binary (typically /system) cannot
+# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK
+
+#<src>                                         <mnt_point>            <type>  <mnt_flags and options>              <fs_mgr_flags>
+/dev/block/bootdevice/by-name/persist          /mnt/vendor/persist    ext4    noatime,nosuid,nodev,barrier=1       wait

proprietary/vendor/etc/cne/mwqem.conf

@@ -0,0 +1,17 @@
+#configuration parameters for Multi-network Wireless Quality Estimation and Management.
+
+#Number of previous latency iterations to track to decide the better LQS interface
+latency_count:3
+#Threshold in ms to decide the better interface for LQS.
+latency_threshold:10
+#Number of tcp connections to be established in each latency session
+max_tcp_connects:3
+#Max waiting time for a dns query to be resolved
+dns_timeout:9
+#Minimum change in mwqem ratio to update the new LQA ratio
+lqa_update_threshold:0.25
+#Timer in msec to track the lqs updates. Only one update will be allowed
+#in this duration
+lqa_update_count_timer:10000
+#default URL for establishing a tcp sessions
+mwqem_http_url:www.qualcomm.com

proprietary/vendor/etc/cne/profileMwqem.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2020 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile1.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                                        <MACMibThreshold2a>1.0</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1.0</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile2.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-82,-82</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-82,-82</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                                        <MACMibThreshold2a>1.0</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1.0</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile3.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile4.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1.0</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1.0</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1.0</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1.0</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                                        <MACMibThreshold2a>1.0</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1.0</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile5.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>12</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>3</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>60</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-90,-90</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-90,-90</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile6.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2017-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-87,-88</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-87,-88</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>12</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>3</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>60</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile1.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.09</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.55</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.15</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>0.12</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>0.1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>0.64</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>0.22</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>0.42</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>0.21</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile15.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-85,-85</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-85,-85</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-80,-80</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-80,-80</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>

proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile16.xml

@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--Copyright (c) 2018 Qualcomm Technologies, Inc.
+    All Rights Reserved.
+    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
+<AndsfPolicy><Andsf>
+	    <Version>5.1</Version>
+		<Name>Test 1</Name>
+		<Ext>
+			<WQE>
+				<InterfaceManager>
+					<BQE_Disabled>true</BQE_Disabled>
+					<ICD_Disabled>true</ICD_Disabled>
+					<!-- Default bqe thresholds where no apIds are specified. -->
+					<BQE_Thresholds Id="128">
+						<RadioTechnology Type="CDMA2000">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_0">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_A">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EVDO_B">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EDGE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="UMTS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSDPA">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="GPRS">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="LTE">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="EHRPD">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+						<RadioTechnology Type="HSPAP">
+							<Threshold units="bps">0</Threshold>
+						</RadioTechnology>
+					</BQE_Thresholds>
+					<Authentication>
+						<MaxAuthTime>60</MaxAuthTime>
+						<IcdBanRetest>3</IcdBanRetest>
+						<AuthApps>
+							<Appname>someauthapp1</Appname>
+							<Appname>someauthapp2</Appname>
+							<Appname>someauthapp3</Appname>
+						</AuthApps>
+					</Authentication>
+					<ICD config-type="disabled">
+					</ICD>
+                    <TQE>
+                        <!-- Default node for TQE_Thresholds element -->
+                        <TQE_Thresholds Id="128">
+                            <!-- Disabling Broken Backhaul Detector module -->
+                            <BBD_Disabled>true</BBD_Disabled>
+                            <!-- Disabling Degraded Backhaul Detector module -->
+                            <DBD_Disabled>true</DBD_Disabled>
+                            <!-- Threshold on downlink gap indicator metric -->
+                            <DGIMThresh units="msecs">400</DGIMThresh>
+                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
+                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
+                            <!-- Time window for TQE history -->
+                            <TQETimeWindow units="secs">77</TQETimeWindow>
+                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
+                            <RatioThresh>0.2</RatioThresh>
+                        </TQE_Thresholds>
+                    </TQE>
+				</InterfaceManager>
+			</WQE>
+			<CQE prodId="Rome">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>4</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>50</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>8</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>4</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+		    <CQE prodId="Helium">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-75,-75</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-75,-75</RSSIDropThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.7</MACStatsAveragingAlpha>
+					<!-- Threshold for RX MPDU PER -->
+					<RMP_THR>1</RMP_THR>
+					<!-- Minimum MPDU count to activate RX MPDU PER -->
+					<RMP_CNT_THR>10</RMP_CNT_THR>
+					<!-- Cutoff RX MCS index -->
+					<RX_MCS_THR>9</RX_MCS_THR>
+					<!-- Cutoff RX BW index -->
+					<RX_BW_THR>3</RX_BW_THR>
+					<!-- Threshold for TX MSDU drop -->
+					<TMD_THR>1</TMD_THR>
+					<!-- Minimum MSDU count to activate TX MSDU drop -->
+					<TMD_CNT_THR>2</TMD_CNT_THR>
+					<!-- Threshold for MPDU retry rate -->
+					<TMR_THR>1</TMR_THR>
+					<!-- Minimum MPDU count to activate MPDU retry rate -->
+					<TMR_CNT_THR>100</TMR_CNT_THR>
+					<!-- Cutoff TX MCS index -->
+					<TX_MCS_THR>4</TX_MCS_THR>
+					<!-- Cutoff TX BW index -->
+					<TX_BW_THR>2</TX_BW_THR>
+					<!-- Maximum MPDU count to activate RX MPDU PER -->
+					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
+					<!-- Maximum MPDU count to activate MPDU retry rate -->
+					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
+					<!-- Threshold for PERAM -->
+					<PERAM_THR>1</PERAM_THR>
+					<!-- Minimum MPDU count to activate PERAM -->
+					<PERAM_CNT_THR>20</PERAM_CNT_THR>
+					<!-- Maximum MPDU count to activate PERAM -->
+					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
+					<!-- CQE throughput Threshold-->
+					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
+				</CQE_Thresholds>
+			</CQE>
+			<CQE prodId="Pronto">
+				<!-- Default node for CQE_Thresholds element -->
+				<CQE_Thresholds Id="128">
+					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIAddThreshold units="dbm">-65,-65</RSSIAddThreshold>
+					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
+					<!-- a candidate for interface selection -->
+					<RSSIDropThreshold units="dbm">-65,-65</RSSIDropThreshold>
+					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
+					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
+					<!-- Interval over whcih RSSI values are averaged -->
+					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
+					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
+					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
+					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
+					<!-- Setting CQETimer to zero disables the CQE -->
+					<CQETimer units="secs">2</CQETimer>
+					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
+					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
+					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
+					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
+					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
+					<FrameCntThreshold units="frames">8</FrameCntThreshold>
+					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
+					<ColdStartThreshold units="frames">2</ColdStartThreshold>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+                    <MACMibThreshold2a>1</MACMibThreshold2a>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is greater than RSSIModelThreshold -->
+					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
+					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
+					<!-- such as retry, multi-retry, fail and  ack fail metric -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MACMibThreshold2b>1</MACMibThreshold2b>
+					<!-- The weightage that given to retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
+					<!-- The weightage that given to multi-retry metric in computation of CQE -->
+					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
+					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
+				</CQE_Thresholds>
+			</CQE>
+		</Ext>
+	</Andsf></AndsfPolicy>