psmattas/device_oneplus_sm7250-common
Archived
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

sm7250-common: Update wifi configs from OnePlusNordCE OxygenOS 11.0.4.4

Browse Source
This commit is contained in:
KakatkarAkshay
2021-07-18 20:48:29 +05:30
parent b2e970992b
commit ee5e276e9b
6 changed files with 448 additions and 752 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
common.mk
View File

@@ -493,8 +493,7 @@ PRODUCT_PACKAGES += \
wpa_supplicant.conf wpa_supplicant.conf
PRODUCT_COPY_FILES += \ PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/wifi/qca6390/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/qca6390/WCNSS_qcom_cfg.ini \ $(LOCAL_PATH)/wifi/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg.ini \
$(LOCAL_PATH)/wifi/qca6390/WCNSS_qcom_cfg_cta_lito_8.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/qca6390/WCNSS_qcom_cfg_cta_lito_8.ini \
$(LOCAL_PATH)/wifi/WCNSS_qcom_cfg_roam.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg_roam.ini \ $(LOCAL_PATH)/wifi/WCNSS_qcom_cfg_roam.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg_roam.ini \
$(LOCAL_PATH)/wifi/WCNSS_qcom_cfg_setchain.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg_setchain.ini \ $(LOCAL_PATH)/wifi/WCNSS_qcom_cfg_setchain.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg_setchain.ini \
$(LOCAL_PATH)/wifi/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \ $(LOCAL_PATH)/wifi/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \

332
wifi/qca6390/WCNSS_qcom_cfg.ini → wifi/WCNSS_qcom_cfg.ini
View File

@@ -1,52 +1,11 @@
# This file allows user to override the factory # This file allows user to override the factory
# defaults for the WLAN Driver # defaults for the WLAN Driver
#Below ini copied from LA.UM.0.6.3 # Enable IMPS or not
# ifdef VENDOR_EDIT gEnableImps=1
gDualMacFeatureDisable=6
gInitialScanNoDFSChnl=1 # Enable BMPS or not
#gInitialDwellTime=20 gEnableBmps=1
#ifndef VENDOR_EDIT
#Use dynamic iwpriv to control
#gSoftApMaxPeers=8
#endif VENDOR_EDIT
gRoamBmissFirstBcnt=15
gRoamBmissFinalBcnt=25
gDroppedPktDisconnectTh=1024
# Runtime is default zero in hostdriver
gRuntimePM=0
gRAFilterEnable=0
gMCAddrListEnable=1
# 0: disable feature (default)
# 1: drop all broadcast frames, except ARP
# 2: drop all multicast frames, except ICMPv6
# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
gHwFilterMode=3
gBpfFilterEnable=1
#gFwDebugLogLevel=3
#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
gChannelBondingMode24GHz=0
gStaKeepAlivePeriod=30
gper_roam_enabled=3
gper_roam_th_percent=80
gper_min_rssi_threshold_for_roam=70
gItoRepeatCount=5
gDisablePacketFilter=0
#ifndef VENDOR_EDIT
#g_enable_packet_filter_bitmap=3
#else
# for layer2(mac) multicast, layer3(ip) multicast filter
g_enable_packet_filter_bitmap=7
#endif /* VENDOR_EDIT */
gEnableModulatedDTIM=3
gMaxLIModulatedDTIM=6
#gActiveModeOffload=0
gReportMaxLinkSpeed=2
gEnableTDLSScan=1
gEnableTxSUBeamformer=0
gEnableSelfRecovery=1
# endif /* VENDOR_EDIT */
fw_timeout_crash=1
# Phy Mode (auto, b, g, n, etc) # Phy Mode (auto, b, g, n, etc)
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac # Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
@@ -54,6 +13,13 @@ fw_timeout_crash=1
# 7 = 11b only 8 = 11ac only. # 7 = 11b only 8 = 11ac only.
gDot11Mode=0 gDot11Mode=0
# Assigned MAC Addresses - This will be used until NV items are in place
# Each byte of MAC address is represented in Hex format as XX
Intf0MacAddress=000AF58989FF
Intf1MacAddress=000AF58989FE
Intf2MacAddress=000AF58989FD
Intf3MacAddress=000AF58989FC
# UAPSD service interval for VO,VI, BE, BK traffic # UAPSD service interval for VO,VI, BE, BK traffic
InfraUapsdVoSrvIntv=0 InfraUapsdVoSrvIntv=0
InfraUapsdViSrvIntv=0 InfraUapsdViSrvIntv=0
@@ -63,22 +29,16 @@ InfraUapsdBkSrvIntv=0
# Flag to allow STA send AddTspec even when ACM is Off # Flag to allow STA send AddTspec even when ACM is Off
gAddTSWhenACMIsOff=1 gAddTSWhenACMIsOff=1
# ifdef VENDOR_EDIT # Flags to filter Mcast and Bcast RX packets.
# Enable IMPS or not # Value 0: No filtering, 1: Filter all Multicast.
gEnableImps=1 # 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
McastBcastFilter=3
# Enable BMPS or not
gEnableBmps=1
# Enable Qpower or not on SM8250_R paltform, 0 for disable
gOptimizedPowerManagement=0
#Flag to enable HostARPOffload feature or not #Flag to enable HostARPOffload feature or not
hostArpOffload=1 hostArpOffload=1
#Flag to enable HostNSOffload feature or not #Flag to enable HostNSOffload feature or not
hostNSOffload=1 hostNSOffload=1
# endif /* VENDOR_EDIT */
# 802.11n Protection flag # 802.11n Protection flag
gEnableApProt=1 gEnableApProt=1
@@ -89,6 +49,9 @@ gEnableApOBSSProt=1
#Enable/Disable UAPSD for SoftAP #Enable/Disable UAPSD for SoftAP
gEnableApUapsd=1 gEnableApUapsd=1
# Fixed Rate
gFixedRate=0
# Maximum Tx power # Maximum Tx power
# gTxPowerCap=30 # gTxPowerCap=30
@@ -105,21 +68,13 @@ gDisableIntraBssFwd=0
WmmIsEnabled=0 WmmIsEnabled=0
# 802.11d support # 802.11d support
#ifdef VENDOR_EDIT
g11dSupportEnabled=1
#else
#g11dSupportEnabled=0 #g11dSupportEnabled=0
#endif /* VENDOR_EDIT */
# 802.11h support # 802.11h support
g11hSupportEnabled=1 g11hSupportEnabled=1
# DFS Master Capability # DFS Master Capability
#ifdef VENDOR_EDIT
gEnableDFSMasterCap=0
#else
#gEnableDFSMasterCap=1 #gEnableDFSMasterCap=1
#endif /* VENDOR_EDIT */
# ESE Support and fast transition # ESE Support and fast transition
EseEnabled=0 EseEnabled=0
@@ -129,6 +84,8 @@ ImplicitQosIsEnabled=0
gNeighborScanTimerPeriod=200 gNeighborScanTimerPeriod=200
gNeighborLookupThreshold=76 gNeighborLookupThreshold=76
gNeighborScanChannelMinTime=20 gNeighborScanChannelMinTime=20
gNeighborScanChannelMaxTime=30
gMaxNeighborReqTries=3
# Legacy (non-ESE, non-802.11r) Fast Roaming Support # Legacy (non-ESE, non-802.11r) Fast Roaming Support
# To enable, set FastRoamEnabled=1 # To enable, set FastRoamEnabled=1
@@ -149,6 +106,15 @@ gRoamIntraBand=0
gShortGI20Mhz=1 gShortGI20Mhz=1
gShortGI40Mhz=1 gShortGI40Mhz=1
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
gAPAutoShutOff=0
#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
gWlanAutoShutdown = 0
# Not used.
gApAutoChannelSelection=0
#Preferred band (both or 2.4 only or 5 only) #Preferred band (both or 2.4 only or 5 only)
BandCapability=0 BandCapability=0
@@ -178,9 +144,11 @@ gChannelBondingMode5GHz=1
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) / # (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
# (gApLinkMonitorPeriod + gApKeepAlivePeriod) # (gApLinkMonitorPeriod + gApKeepAlivePeriod)
gGoKeepAlivePeriod = 20 gGoKeepAlivePeriod = 20
#ifdef VENDOR_EDIT
gApKeepAlivePeriod = 20 gApKeepAlivePeriod = 20
#endif /* VENDOR_EDIT */
#If set will start with active scan after driver load, otherwise will start with
#passive scan to find out the domain
gEnableBypass11d=1
#If set to 0, will not scan DFS channels #If set to 0, will not scan DFS channels
gEnableDFSChnlScan=1 gEnableDFSChnlScan=1
@@ -189,17 +157,10 @@ gEnableDFSChnlScan=1
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE # 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
gAllowDFSChannelRoam=1 gAllowDFSChannelRoam=1
#ifdef VENDOR_EDIT
# Enable ETSI13 hotspot on SRD channel
etsi13_srd_chan_in_master_mode=1
#endif VENDOR_EDIT
gVhtChannelWidth=2 gVhtChannelWidth=2
#ifdef VENDOR_EDIT
#Data Inactivity Timeout when in powersave (in ms) #Data Inactivity Timeout when in powersave (in ms)
gDataInactivityTimeout=200 gDataInactivityTimeout=200
#endif /* VENDOR_EDIT */
# Set txchainmask and rxchainmask # Set txchainmask and rxchainmask
# These parameters are used only if gEnable2x2 is 0 # These parameters are used only if gEnable2x2 is 0
@@ -211,13 +172,9 @@ gSetRxChainmask1x1=1
# Scan Timing Parameters # Scan Timing Parameters
# gPassiveMaxChannelTime=110 # gPassiveMaxChannelTime=110
#ifdef VENDOR_EDIT # gPassiveMinChannelTime=60
gActiveMaxChannelTime=60
gActiveMinChannelTime=40
#else
#gActiveMaxChannelTime=40 #gActiveMaxChannelTime=40
#gActiveMinChannelTime=20 #gActiveMinChannelTime=20
#endif /* VENDOR_EDIT */
#If set to 0, MCC is not allowed. #If set to 0, MCC is not allowed.
gEnableMCCMode=1 gEnableMCCMode=1
@@ -251,23 +208,22 @@ gEnableTxBFeeSAP=1
# 0=disable, 1=enable # 0=disable, 1=enable
gEnableTxBFin20MHz=1 gEnableTxBFin20MHz=1
#Enable/Disable SU Tx beamformer support #Enable/Disable SU Tx beamformer support.
#gEnableTxSUBeamformer=1 gEnableTxSUBeamformer=1
gEnableFastRoamInConcurrency=1 gEnableFastRoamInConcurrency=1
#Maxium Channel time in msec
gMaxMediumTime = 6000
# 802.11K support # 802.11K support
gRrmEnable=1 gRrmEnable=1
#ifdef VENDOR_EDIT
#Enable Power Save offload #Enable Power Save offload
gEnablePowerSaveOffload=1
#else
#gEnablePowerSaveOffload=2 #gEnablePowerSaveOffload=2
#Enable firmware uart print #Enable firmware uart print
gEnablefwprint=0 gEnablefwprint=0
#endif VENDOR_EDIT
# Firmware log mode # Firmware log mode
# Valid values are 0,1,2 # Valid values are 0,1,2
@@ -282,6 +238,9 @@ gVhtAmpduLenExponent=7
# 0->3895 octets, 1->7991 octets, 2->11454 octets) # 0->3895 octets, 1->7991 octets, 2->11454 octets)
gVhtMpduLen=2 gVhtMpduLen=2
# Maximum number of wow filters required
#gMaxWoWFilters=22
# WOW Enable/Disable. # WOW Enable/Disable.
# 0 - Disable both magic pattern match and pattern byte match. # 0 - Disable both magic pattern match and pattern byte match.
# 1 - Enable magic pattern match on all interfaces. # 1 - Enable magic pattern match on all interfaces.
@@ -320,6 +279,9 @@ ssdp=0
#Enable Memory Deep Sleep #Enable Memory Deep Sleep
gEnableMemDeepSleep=1 gEnableMemDeepSleep=1
# Regulatory Setting; 0=STRICT; 1=CUSTOM
gRegulatoryChangeCountry=1
# RA filtering rate limit param, the current value would not # RA filtering rate limit param, the current value would not
# help if the lifetime in RA is less than 3*60=3min. Then # help if the lifetime in RA is less than 3*60=3min. Then
# we need to change it, though it is uncommon. # we need to change it, though it is uncommon.
@@ -333,6 +295,9 @@ gMaxConcurrentActiveSessions=3
# 0 to disable, 1 to enable, default: 1 # 0 to disable, 1 to enable, default: 1
gEnableGreenAp=0 gEnableGreenAp=0
# Radar PRI multiplier
gDFSradarMappingPriMultiplier=4
gPNOScanSupport=1 gPNOScanSupport=1
#Enable/Disable LPASS support #Enable/Disable LPASS support
@@ -343,19 +308,17 @@ gEnableLpassSupport=1
gCountryCodePriority=1 gCountryCodePriority=1
# Enable(1)/Disable(0) SIFS burst # Enable(1)/Disable(0) SIFS burst
#ifdef VENDOR_EDIT #gEnableSifsBurst=1
#Min: 0 disabled
#Max: 3 enabled802.11g
#Default: 1 enabled, but disabled for legacy mode
gEnableSifsBurst=3
#else
# gEnableSifsBurst=1
# endif /* VENDOR_EDIT */
# Enable or Disable Multi-user MIMO # Enable or Disable Multi-user MIMO
# 1=Enable (default), 0=Disable # 1=Enable (default), 0=Disable
gEnableMuBformee=1 gEnableMuBformee=1
# Enable/Disable channel avoidance for SAP in SCC scenario
# 0 - disable
# 1 - enable
gSapSccChanAvoidance=0
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode # Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
gIbssTxSpEndInactivityTime=10 gIbssTxSpEndInactivityTime=10
@@ -393,7 +356,7 @@ gEnableTDLSOffChannel=1
# Enable or Disable Random MAC (Spoofing) # Enable or Disable Random MAC (Spoofing)
# 1=Enable (default), 0=Disable # 1=Enable (default), 0=Disable
gEnableMacAddrSpoof=1 #gEnableMacAddrSpoof=1
################ Datapath feature set Begin ################ ################ Datapath feature set Begin ################
# Bus bandwidth threshold values in terms of number of packets # Bus bandwidth threshold values in terms of number of packets
@@ -438,9 +401,7 @@ gCEClassifyEnable=1
# Enable Rx handling options # Enable Rx handling options
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium) # Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
# DP_RX_THREAD=16 (1 << 4) rx_mode=5
# 20 = (DP_RX_THREAD | NAPI)
rx_mode=20
# Enable(Tx) fastpath for data traffic. # Enable(Tx) fastpath for data traffic.
# 1 - enable(default) 0 - disable # 1 - enable(default) 0 - disable
@@ -477,14 +438,18 @@ ce_service_max_rx_ind_flush=1
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND # Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
maxMSDUsPerRxInd=8 maxMSDUsPerRxInd=8
# Enable NUD tracking feature #ifdef VENDOR_EDIT
# swapnil.ranjan@Connectivity, 2020/03/26, [SM7250 Porting] align the vowifi behavior with 18865.
# 1 - enable 0 - disable(default) # 1 - enable 0 - disable(default)
#ifndef VENDOR_EDIT
# richy.li@Connectivity, 2019/10/11, [Q porting] align the vowifi behavior with 18811.
#gEnableNUDTracking=1 #gEnableNUDTracking=1
#else #else
gEnableNUDTracking=0 gEnableNUDTracking=0
#endif /* VENDOR_EDIT */ #endif VENDOR_EDIT
# Enable PEER UNMAP CONF SUPPORT
# 1 - enable 0 - disable(default)
gEnablePeerUnmapConfSupport=1
################ Datapath feature set End ################ ################ Datapath feature set End ################
################ NAN feature set start ################### ################ NAN feature set start ###################
@@ -497,11 +462,7 @@ genable_nan_datapath=1
################ NAN feature set end ##################### ################ NAN feature set end #####################
#ifdef VENDOR_EDIT
adaptive_dwell_mode_enabled=0
#else
#adaptive_dwell_mode_enabled=1 #adaptive_dwell_mode_enabled=1
#endif /* VENDOR_EDIT */
hostscan_adaptive_dwell_mode=1 hostscan_adaptive_dwell_mode=1
@@ -511,56 +472,157 @@ adapt_dwell_wifi_act_threshold=10
MAWCEnabled=0 MAWCEnabled=0
drop_bcn_on_chan_mismatch=0
# Enable/Disable rtt sta mac randomization # Enable/Disable rtt sta mac randomization
enable_rtt_mac_randomization=1 enable_rtt_mac_randomization=1
#Enable/Disable SNR monitoring #Enable/Disable SNR monitoring
gEnableSNRMonitoring=1 gEnableSNRMonitoring=1
# HTC Credit count for WMI operation # Rx thread affinity mask in UL case
# 1 to serialize the WMI commands RX_THREAD_UL_CPU_AFFINITY_MASK=0xc0
# 0 default works with FW advertised credits, 2 credits usually
gWmiCreditCount=1
# Enable enhanced ACS # ifdef VENDOR_EDIT
acs_with_more_param=1 etsi13_srd_chan_in_master_mode=1
# bits 0-3: rssi weight # endif /* VENDOR_EDIT */
# bits 4-7: bss count weight
# bits 8-11: noise floor weight
# bits 12-15: channel free weight
# bits 16-19: tx power range weight
# bits 20-23: tx power throughput weight
# bits 24-31: reserved
AutoChannelSelectWeight=0x00fafafa
# Enable/Disable broadcast TWT # ifdef VENDOR_EDIT
bcast_twt=1 gEnableTDLSScan=1
# endif /* VENDOR_EDIT */
# Enable Runtime PM # ifdef VENDOR_EDIT
#gRuntimePM=1 #Removing the Rx beamforming for data stall improvement
gEnableTxSUBeamformer=0
# endif /* VENDOR_EDIT */
# Enable broadcast logging to the userspace entities # ifdef VENDOR_EDIT
gMulticastHostFwMsgs=1 gDualMacFeatureDisable=1
# Disable packetlog explicitly gInitialScanNoDFSChnl=1
#gInitialDwellTime=20
gSoftApMaxPeers=8
gRoamBmissFirstBcnt=15
gRoamBmissFinalBcnt=25
gDroppedPktDisconnectTh=1024
# Runtime is default zero in hostdriver
gRuntimePM=0
gRAFilterEnable=0
gMCAddrListEnable=1
# 0: disable feature (default)
# 1: drop all broadcast frames, except ARP
# 2: drop all multicast frames, except ICMPv6
# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
gHwFilterMode=3
gBpfFilterEnable=1
#gFwDebugLogLevel=3
#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
#gChannelBondingMode24GHz=1
gChannelBondingMode24GHz=0
gForce1x1Exception=0
gStaKeepAlivePeriod=30
gper_roam_enabled=3
gper_roam_th_percent=80
gper_min_rssi_threshold_for_roam=70
gItoRepeatCount=5
gDisablePacketFilter=0
#ifndef VENDOR_EDIT #ifndef VENDOR_EDIT
#gEnablePacketLog=0 #g_enable_packet_filter_bitmap=3
#else #else
# for layer2(mac) multicast, layer3(ip) multicast filter
g_enable_packet_filter_bitmap=7
#endif /* VENDOR_EDIT */
LROEnable=0
gEnableModulatedDTIM=3
gMaxLIModulatedDTIM=6
#gActiveModeOffload=0
gActionOUISwitchTo11nMode="FFFFFF 03 FFFFBF 20 21 40"
gReportMaxLinkSpeed=2
# endif /* VENDOR_EDIT */
#ifdef VENDOR_EDIT
g11dSupportEnabled=1
#else
#g11dSupportEnabled=0
#endif VENDOR_EDIT
#ifdef VENDOR_EDIT
gEnableDFSMasterCap=0
#else
#gEnableDFSMasterCap=1
#endif VENDOR_EDIT
# RSSI threshold offset for 2G to 5G roam
roam_bad_rssi_thresh_offset_2g=0
# Scan Timing Parameters
# gPassiveMaxChannelTime=110
# gPassiveMinChannelTime=60
#ifdef VENDOR_EDIT
gActiveMaxChannelTime=60
gActiveMinChannelTime=40
#else
#gActiveMaxChannelTime=40
#gActiveMinChannelTime=20
#endif VENDOR_EDIT
#Enable Power Save offload
#ifdef VENDOR_EDIT
gEnablePowerSaveOffload=1
#else
#gEnablePowerSaveOffload=2
#endif VENDOR_EDIT
# Enable(1)/Disable(0) SIFS burst
#ifdef VENDOR_EDIT
#Min: 0 disabled
#Max: 3 enabled802.11g
#Default: 1 enabled, but disabled for legacy mode
gEnableSifsBurst=3
#else
# gEnableSifsBurst=1
# endif /* VENDOR_EDIT */
# Enable or Disable Random MAC (Spoofing)
# 1=Enable (default), 0=Disable
#ifdef VENDOR_EDIT
gEnableMacAddrSpoof=1
#else
#gEnableMacAddrSpoof=0
#endif VENDOR_EDIT
#ifdef VENDOR_EDIT
adaptive_dwell_mode_enabled=0
#else
#adaptive_dwell_mode_enabled=1
#endif /* VENDOR_EDIT */
# Enable/Disable DTIM Synth
# 1- Enable DTIM Synth
# 0- Disable DTIM Synth
gEnableLPRx=0
#Action OUIs for 1x1 connection
#Please do not remove the default values, append new OUIs in the end
#Default=000C43 00 25 42 001018 06 02FFF02C0000 BC 25 42 001018 06 02FF040C0000 BC 25 42 00037F 00 35 6C
#ifdef VENDOR_EDIT
# Sync http://pgerrit.oneplus.cn:8080/#/c/200897/ for EID-4159 and http://pgerrit.oneplus.cn:8080/#/c/229408/ for ISTRACKING-19649
#gActionOUIConnect1x1=000C43 00 25 42 001018 06 02FFF02C0000 BC 25 42 001018 06 02FF040C0000 BC 25 42 001018 06 02FF001C0000 BC 25 48 001018 06 0200000C0000 BC 25 42
#endif /* VENDOR_EDIT */
#Action OUIs for ITO extension
#Please do not remove the default values, append new OUIs in the end
#Default=00037F 06 01010000FF7F FC 01 000AEB 02 0100 C0 01 000B86 03 010408 E0 01
#gActionOUIITOExtension=00037F 06 01010000FF7F FC 01 000AEB 02 0100 C0 01 000B86 03 010408 E0 01
#ifdef VENDOR_EDIT
global_adapt_dwelltime_mode=1 global_adapt_dwelltime_mode=1
roamscan_adaptive_dwell_mode=1 roamscan_adaptive_dwell_mode=1
extscan_adaptive_dwell_mode=1 extscan_adaptive_dwell_mode=1
pnoscan_adaptive_dwell_mode=1 pnoscan_adaptive_dwell_mode=1
active_max_channel_time_2g=60 active_max_channel_time_2g=60
#endif /* VENDOR_EDIT */
# Set IPA bandwidth levels in mbps gcmp_enabled=0
gIPALowBandwidthMbps=100 gEnablePacketLog=1
gIPAMediumBandwidthMbps=400 #endif /* VENDOR_EDIT */
gIPAHighBandwidthMbps=800
spectral_disable=1
END END
# Note: Configuration parser would not read anything past the END marker # Note: Configuration parser would not read anything past the END marker

296
wifi/WCNSS_qcom_cfg_roam.ini
View File

@@ -1,11 +1,11 @@
# This file allows user to override the factory # This file allows user to override the factory
# for close wifi roam # defaults for the WLAN Driver
gEnableImps = 0
gEnableBmps = 0 # For close wifi roam
gEnableImps=0
gEnableBmps=0
gRoamOffloadEnabled=0 gRoamOffloadEnabled=0
gRoamScanOffloadEnabled=0 gRoamScanOffloadEnabled=0
#Below ini copied from LA.UM.0.6.3
fw_timeout_crash=1
# Phy Mode (auto, b, g, n, etc) # Phy Mode (auto, b, g, n, etc)
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac # Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
@@ -13,6 +13,13 @@ fw_timeout_crash=1
# 7 = 11b only 8 = 11ac only. # 7 = 11b only 8 = 11ac only.
gDot11Mode=0 gDot11Mode=0
# Assigned MAC Addresses - This will be used until NV items are in place
# Each byte of MAC address is represented in Hex format as XX
Intf0MacAddress=000AF58989FF
Intf1MacAddress=000AF58989FE
Intf2MacAddress=000AF58989FD
Intf3MacAddress=000AF58989FC
# UAPSD service interval for VO,VI, BE, BK traffic # UAPSD service interval for VO,VI, BE, BK traffic
InfraUapsdVoSrvIntv=0 InfraUapsdVoSrvIntv=0
InfraUapsdViSrvIntv=0 InfraUapsdViSrvIntv=0
@@ -22,6 +29,17 @@ InfraUapsdBkSrvIntv=0
# Flag to allow STA send AddTspec even when ACM is Off # Flag to allow STA send AddTspec even when ACM is Off
gAddTSWhenACMIsOff=1 gAddTSWhenACMIsOff=1
# Flags to filter Mcast and Bcast RX packets.
# Value 0: No filtering, 1: Filter all Multicast.
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
McastBcastFilter=3
#Flag to enable HostARPOffload feature or not
hostArpOffload=1
#Flag to enable HostNSOffload feature or not
hostNSOffload=1
# 802.11n Protection flag # 802.11n Protection flag
gEnableApProt=1 gEnableApProt=1
@@ -31,6 +49,9 @@ gEnableApOBSSProt=1
#Enable/Disable UAPSD for SoftAP #Enable/Disable UAPSD for SoftAP
gEnableApUapsd=1 gEnableApUapsd=1
# Fixed Rate
gFixedRate=0
# Maximum Tx power # Maximum Tx power
# gTxPowerCap=30 # gTxPowerCap=30
@@ -47,13 +68,13 @@ gDisableIntraBssFwd=0
WmmIsEnabled=0 WmmIsEnabled=0
# 802.11d support # 802.11d support
g11dSupportEnabled=0 #g11dSupportEnabled=0
# 802.11h support # 802.11h support
g11hSupportEnabled=1 g11hSupportEnabled=1
# DFS Master Capability # DFS Master Capability
gEnableDFSMasterCap=1 #gEnableDFSMasterCap=1
# ESE Support and fast transition # ESE Support and fast transition
EseEnabled=0 EseEnabled=0
@@ -63,12 +84,15 @@ ImplicitQosIsEnabled=0
gNeighborScanTimerPeriod=200 gNeighborScanTimerPeriod=200
gNeighborLookupThreshold=76 gNeighborLookupThreshold=76
gNeighborScanChannelMinTime=20 gNeighborScanChannelMinTime=20
gNeighborScanChannelMaxTime=30
gMaxNeighborReqTries=3
# Legacy (non-ESE, non-802.11r) Fast Roaming Support # Legacy (non-ESE, non-802.11r) Fast Roaming Support
# To enable, set FastRoamEnabled=1 # To enable, set FastRoamEnabled=1
# To disable, set FastRoamEnabled=0 # To disable, set FastRoamEnabled=0
FastRoamEnabled=1 FastRoamEnabled=1
FastTransitionEnabled=0
# Check if the AP to which we are roaming is better than current AP in # Check if the AP to which we are roaming is better than current AP in
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will # terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
# use this value as to how better the RSSI of the new/roamable AP should # use this value as to how better the RSSI of the new/roamable AP should
@@ -83,6 +107,15 @@ gRoamIntraBand=0
gShortGI20Mhz=1 gShortGI20Mhz=1
gShortGI40Mhz=1 gShortGI40Mhz=1
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
gAPAutoShutOff=0
#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
gWlanAutoShutdown = 0
# Not used.
gApAutoChannelSelection=0
#Preferred band (both or 2.4 only or 5 only) #Preferred band (both or 2.4 only or 5 only)
BandCapability=0 BandCapability=0
@@ -112,6 +145,11 @@ gChannelBondingMode5GHz=1
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) / # (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
# (gApLinkMonitorPeriod + gApKeepAlivePeriod) # (gApLinkMonitorPeriod + gApKeepAlivePeriod)
gGoKeepAlivePeriod = 20 gGoKeepAlivePeriod = 20
gApKeepAlivePeriod = 20
#If set will start with active scan after driver load, otherwise will start with
#passive scan to find out the domain
gEnableBypass11d=1
#If set to 0, will not scan DFS channels #If set to 0, will not scan DFS channels
gEnableDFSChnlScan=1 gEnableDFSChnlScan=1
@@ -122,6 +160,12 @@ gAllowDFSChannelRoam=1
gVhtChannelWidth=2 gVhtChannelWidth=2
#disable low data rate packet
gEnableRTSProfiles=0
#Data Inactivity Timeout when in powersave (in ms)
gDataInactivityTimeout=200
# Set txchainmask and rxchainmask # Set txchainmask and rxchainmask
# These parameters are used only if gEnable2x2 is 0 # These parameters are used only if gEnable2x2 is 0
# Valid values are 1,2 # Valid values are 1,2
@@ -132,7 +176,9 @@ gSetRxChainmask1x1=1
# Scan Timing Parameters # Scan Timing Parameters
# gPassiveMaxChannelTime=110 # gPassiveMaxChannelTime=110
gActiveMaxChannelTime=40 # gPassiveMinChannelTime=60
#gActiveMaxChannelTime=40
#gActiveMinChannelTime=20
#If set to 0, MCC is not allowed. #If set to 0, MCC is not allowed.
gEnableMCCMode=1 gEnableMCCMode=1
@@ -166,14 +212,23 @@ gEnableTxBFeeSAP=1
# 0=disable, 1=enable # 0=disable, 1=enable
gEnableTxBFin20MHz=1 gEnableTxBFin20MHz=1
#Enable/Disable SU Tx beamformer support #Enable/Disable SU Tx beamformer support.
gEnableTxSUBeamformer=0 gEnableTxSUBeamformer=1
gEnableFastRoamInConcurrency=1 gEnableFastRoamInConcurrency=1
#Maxium Channel time in msec
gMaxMediumTime = 6000
# 802.11K support # 802.11K support
gRrmEnable=1 gRrmEnable=1
#Enable Power Save offload
#gEnablePowerSaveOffload=2
#Enable firmware uart print
gEnablefwprint=0
# Firmware log mode # Firmware log mode
# Valid values are 0,1,2 # Valid values are 0,1,2
# 0=Disable, 1=WMI, 2=DIAG # 0=Disable, 1=WMI, 2=DIAG
@@ -187,6 +242,9 @@ gVhtAmpduLenExponent=7
# 0->3895 octets, 1->7991 octets, 2->11454 octets) # 0->3895 octets, 1->7991 octets, 2->11454 octets)
gVhtMpduLen=2 gVhtMpduLen=2
# Maximum number of wow filters required
#gMaxWoWFilters=22
# WOW Enable/Disable. # WOW Enable/Disable.
# 0 - Disable both magic pattern match and pattern byte match. # 0 - Disable both magic pattern match and pattern byte match.
# 1 - Enable magic pattern match on all interfaces. # 1 - Enable magic pattern match on all interfaces.
@@ -225,6 +283,9 @@ ssdp=0
#Enable Memory Deep Sleep #Enable Memory Deep Sleep
gEnableMemDeepSleep=1 gEnableMemDeepSleep=1
# Regulatory Setting; 0=STRICT; 1=CUSTOM
gRegulatoryChangeCountry=1
# RA filtering rate limit param, the current value would not # RA filtering rate limit param, the current value would not
# help if the lifetime in RA is less than 3*60=3min. Then # help if the lifetime in RA is less than 3*60=3min. Then
# we need to change it, though it is uncommon. # we need to change it, though it is uncommon.
@@ -238,6 +299,9 @@ gMaxConcurrentActiveSessions=3
# 0 to disable, 1 to enable, default: 1 # 0 to disable, 1 to enable, default: 1
gEnableGreenAp=0 gEnableGreenAp=0
# Radar PRI multiplier
gDFSradarMappingPriMultiplier=4
gPNOScanSupport=1 gPNOScanSupport=1
#Enable/Disable LPASS support #Enable/Disable LPASS support
@@ -248,12 +312,17 @@ gEnableLpassSupport=1
gCountryCodePriority=1 gCountryCodePriority=1
# Enable(1)/Disable(0) SIFS burst # Enable(1)/Disable(0) SIFS burst
gEnableSifsBurst=1 #gEnableSifsBurst=1
# Enable or Disable Multi-user MIMO # Enable or Disable Multi-user MIMO
# 1=Enable (default), 0=Disable # 1=Enable (default), 0=Disable
gEnableMuBformee=1 gEnableMuBformee=1
# Enable/Disable channel avoidance for SAP in SCC scenario
# 0 - disable
# 1 - enable
gSapSccChanAvoidance=0
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode # Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
gIbssTxSpEndInactivityTime=10 gIbssTxSpEndInactivityTime=10
@@ -291,7 +360,7 @@ gEnableTDLSOffChannel=1
# Enable or Disable Random MAC (Spoofing) # Enable or Disable Random MAC (Spoofing)
# 1=Enable (default), 0=Disable # 1=Enable (default), 0=Disable
gEnableMacAddrSpoof=1 #gEnableMacAddrSpoof=1
################ Datapath feature set Begin ################ ################ Datapath feature set Begin ################
# Bus bandwidth threshold values in terms of number of packets # Bus bandwidth threshold values in terms of number of packets
@@ -336,9 +405,7 @@ gCEClassifyEnable=1
# Enable Rx handling options # Enable Rx handling options
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium) # Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
# DP_RX_THREAD=16 (1 << 4) rx_mode=5
# 20 = (DP_RX_THREAD | NAPI)
rx_mode=20
# Enable(Tx) fastpath for data traffic. # Enable(Tx) fastpath for data traffic.
# 1 - enable(default) 0 - disable # 1 - enable(default) 0 - disable
@@ -375,9 +442,18 @@ ce_service_max_rx_ind_flush=1
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND # Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
maxMSDUsPerRxInd=8 maxMSDUsPerRxInd=8
# Enable NUD tracking feature #ifdef VENDOR_EDIT
# swapnil.ranjan@Connectivity, 2020/03/26, [SM7250 Porting] align the vowifi behavior with 18865.
# 1 - enable 0 - disable(default) # 1 - enable 0 - disable(default)
gEnableNUDTracking=1 #gEnableNUDTracking=1
#else
gEnableNUDTracking=0
#endif VENDOR_EDIT
# Enable PEER UNMAP CONF SUPPORT
# 1 - enable 0 - disable(default)
gEnablePeerUnmapConfSupport=1
################ Datapath feature set End ################ ################ Datapath feature set End ################
################ NAN feature set start ################### ################ NAN feature set start ###################
@@ -390,7 +466,7 @@ genable_nan_datapath=1
################ NAN feature set end ##################### ################ NAN feature set end #####################
adaptive_dwell_mode_enabled=1 #adaptive_dwell_mode_enabled=1
hostscan_adaptive_dwell_mode=1 hostscan_adaptive_dwell_mode=1
@@ -400,48 +476,172 @@ adapt_dwell_wifi_act_threshold=10
MAWCEnabled=0 MAWCEnabled=0
drop_bcn_on_chan_mismatch=0
# Enable/Disable rtt sta mac randomization # Enable/Disable rtt sta mac randomization
enable_rtt_mac_randomization=1 enable_rtt_mac_randomization=1
#Enable/Disable SNR monitoring #Enable/Disable SNR monitoring
gEnableSNRMonitoring=1 gEnableSNRMonitoring=1
# HTC Credit count for WMI operation # Rx thread affinity mask in UL case
# 1 to serialize the WMI commands RX_THREAD_UL_CPU_AFFINITY_MASK=0xc0
# 0 default works with FW advertised credits, 2 credits usually
gWmiCreditCount=1
# Enable enhanced ACS # ifdef VENDOR_EDIT
acs_with_more_param=1 etsi13_srd_chan_in_master_mode=1
# bits 0-3: rssi weight # endif /* VENDOR_EDIT */
# bits 4-7: bss count weight
# bits 8-11: noise floor weight
# bits 12-15: channel free weight
# bits 16-19: tx power range weight
# bits 20-23: tx power throughput weight
# bits 24-31: reserved
AutoChannelSelectWeight=0x00fafafa
# Enable/Disable broadcast TWT # ifdef VENDOR_EDIT
bcast_twt=1 gEnableTDLSScan=1
# endif /* VENDOR_EDIT */
# Enable Runtime PM # ifdef VENDOR_EDIT
#gRuntimePM=1 #Removing the Rx beamforming for data stall improvement
gEnableTxSUBeamformer=0
# endif /* VENDOR_EDIT */
# Enable broadcast logging to the userspace entities # ifdef VENDOR_EDIT
gMulticastHostFwMsgs=1 gDualMacFeatureDisable=1
# Disable packetlog explicitly gInitialScanNoDFSChnl=1
gEnablePacketLog=0 #gInitialDwellTime=20
gSoftApMaxPeers=8
gRoamBmissFirstBcnt=15
gRoamBmissFinalBcnt=25
gDroppedPktDisconnectTh=1024
# Runtime is default zero in hostdriver
gRuntimePM=0
gRAFilterEnable=0
gMCAddrListEnable=1
# 0: disable feature (default)
# 1: drop all broadcast frames, except ARP
# 2: drop all multicast frames, except ICMPv6
# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
gHwFilterMode=3
gBpfFilterEnable=1
#gFwDebugLogLevel=3
#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
#gChannelBondingMode24GHz=1
gChannelBondingMode24GHz=0
gForce1x1Exception=0
gStaKeepAlivePeriod=30
gper_roam_enabled=3
gper_roam_th_percent=80
gper_min_rssi_threshold_for_roam=70
gItoRepeatCount=5
gDisablePacketFilter=0
#ifndef VENDOR_EDIT
#g_enable_packet_filter_bitmap=3
#else
# for layer2(mac) multicast, layer3(ip) multicast filter
g_enable_packet_filter_bitmap=7
#endif /* VENDOR_EDIT */
LROEnable=0
gEnableModulatedDTIM=3
gMaxLIModulatedDTIM=6
#gActiveModeOffload=0
gActionOUISwitchTo11nMode="FFFFFF 03 FFFFBF 20 21 40"
gReportMaxLinkSpeed=2
# endif /* VENDOR_EDIT */
# Set IPA bandwidth levels in mbps #ifdef VENDOR_EDIT
gIPALowBandwidthMbps=100 #g11dSupportEnabled=1
gIPAMediumBandwidthMbps=400 #else
gIPAHighBandwidthMbps=800 g11dSupportEnabled=0
spectral_disable=1 #endif VENDOR_EDIT
#ifdef VENDOR_EDIT
gEnableDFSMasterCap=0
#else
#gEnableDFSMasterCap=1
#endif VENDOR_EDIT
# RSSI threshold offset for 2G to 5G roam
roam_bad_rssi_thresh_offset_2g=0
# Scan Timing Parameters
# gPassiveMaxChannelTime=110
# gPassiveMinChannelTime=60
#ifdef VENDOR_EDIT
gActiveMaxChannelTime=60
gActiveMinChannelTime=40
#else
#gActiveMaxChannelTime=40
#gActiveMinChannelTime=20
#endif VENDOR_EDIT
#Enable Power Save offload
#ifdef VENDOR_EDIT
gEnablePowerSaveOffload=1
#else
#gEnablePowerSaveOffload=2
#endif VENDOR_EDIT
# Enable(1)/Disable(0) SIFS burst
#ifdef VENDOR_EDIT
#Min: 0 disabled
#Max: 3 enabled802.11g
#Default: 1 enabled, but disabled for legacy mode
gEnableSifsBurst=0
#else
# gEnableSifsBurst=1
# endif /* VENDOR_EDIT */
# Enable or Disable Random MAC (Spoofing)
# 1=Enable (default), 0=Disable
#ifdef VENDOR_EDIT
gEnableMacAddrSpoof=1
#else
#gEnableMacAddrSpoof=0
#endif VENDOR_EDIT
#ifdef VENDOR_EDIT
adaptive_dwell_mode_enabled=0
#else
#adaptive_dwell_mode_enabled=1
#endif /* VENDOR_EDIT */
# Enable/Disable DTIM Synth
# 1- Enable DTIM Synth
# 0- Disable DTIM Synth
gEnableLPRx=0
#Action OUIs for 1x1 connection
#Please do not remove the default values, append new OUIs in the end
#Default=000C43 00 25 42 001018 06 02FFF02C0000 BC 25 42 001018 06 02FF040C0000 BC 25 42 00037F 00 35 6C
#ifdef VENDOR_EDIT
# Sync http://pgerrit.oneplus.cn:8080/#/c/200897/ for EID-4159 and http://pgerrit.oneplus.cn:8080/#/c/229408/ for ISTRACKING-19649
#gActionOUIConnect1x1=000C43 00 25 42 001018 06 02FFF02C0000 BC 25 42 001018 06 02FF040C0000 BC 25 42 001018 06 02FF001C0000 BC 25 48 001018 06 0200000C0000 BC 25 42
#endif /* VENDOR_EDIT */
#Action OUIs for ITO extension
#Please do not remove the default values, append new OUIs in the end
#Default=00037F 06 01010000FF7F FC 01 000AEB 02 0100 C0 01 000B86 03 010408 E0 01
#gActionOUIITOExtension=00037F 06 01010000FF7F FC 01 000AEB 02 0100 C0 01 000B86 03 010408 E0 01
#ifdef VENDOR_EDIT
global_adapt_dwelltime_mode=1
roamscan_adaptive_dwell_mode=1
extscan_adaptive_dwell_mode=1
pnoscan_adaptive_dwell_mode=1
active_max_channel_time_2g=60
gcmp_enabled=0
gEnablePacketLog=1
#endif /* VENDOR_EDIT */
#Set EDCA parameters
gEnableEdcaParams=1
gEdcaVoCwmin=7
gEdcaViCwmin=7
gEdcaBkCwmin=7
gEdcaBeCwmin=7
gEdcaVoCwmax=15
gEdcaViCwmax=15
gEdcaBkCwmax=15
gEdcaBeCwmax=15
gEdcaVoAifs=2
gEdcaViAifs=2
gEdcaBkAifs=2
gEdcaBeAifs=2
END END
# Note: Configuration parser would not read anything past the END marker # Note: Configuration parser would not read anything past the END marker

1
wifi/p2p_supplicant_overlay.conf
View File

@@ -2,4 +2,3 @@ disable_scan_offload=1
p2p_no_group_iface=1 p2p_no_group_iface=1
persistent_reconnect=1 persistent_reconnect=1
bss_max_count=400 bss_max_count=400
p2p_pref_chan=115:36, 116:36, 115:40, 116:40, 117:40, 115:44, 116:44, 117:44, 115:48, 117:48, 124:149, 125:149, 126:149, 124:153, 125:153, 126:153, 127:153, 124:157, 125:157, 126:157, 127:157, 124:161, 125:161, 127:161, 125:165, 81:1, 81:6, 81:11

565
wifi/qca6390/WCNSS_qcom_cfg_cta_lito_8.ini
View File

@@ -1,565 +0,0 @@
# This file allows user to override the factory
# defaults for the WLAN Driver
#Below ini copied from LA.UM.0.6.3
# ifdef VENDOR_EDIT
# CTA test config
gEnableImps=0
gEnableBmps=0
EseEnabled=0
FastRoamEnabled=0
gPNOScanSupport=0
gEnablePowerSaveOffload=1
gRuntimePM=0
gEnableFWRssiMonitoring=0
gRoamOffloadEnabled=0
gRoamScanOffloadEnabled=0
#TODO: this flag will cause wifi enabled fail
#FastTransitionEnabled=0
# CTA test config
gInitialScanNoDFSChnl=1
#gInitialDwellTime=20
gSoftApMaxPeers=8
gRoamBmissFirstBcnt=15
gRoamBmissFinalBcnt=25
gDroppedPktDisconnectTh=1024
# Runtime is default zero in hostdriver
#gRuntimePM=0
gRAFilterEnable=0
gMCAddrListEnable=1
# 0: disable feature (default)
# 1: drop all broadcast frames, except ARP
# 2: drop all multicast frames, except ICMPv6
# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
gHwFilterMode=3
gBpfFilterEnable=1
#gFwDebugLogLevel=3
#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
gChannelBondingMode24GHz=0
gForce1x1Exception=0
gStaKeepAlivePeriod=30
gper_roam_enabled=3
gper_roam_th_percent=80
gper_min_rssi_threshold_for_roam=70
gItoRepeatCount=5
gDisablePacketFilter=0
g_enable_packet_filter_bitmap=3
LROEnable=0
gEnableModulatedDTIM=3
gMaxLIModulatedDTIM=6
#gActiveModeOffload=0
gActionOUISwitchTo11nMode="FFFFFF 03 FFFFBF 20 21 40"
gReportMaxLinkSpeed=2
gEnableSelfRecovery=0
gEnableTxSUBeamformer=0
# endif /* VENDOR_EDIT */
fw_timeout_crash=1
# Phy Mode (auto, b, g, n, etc)
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
# 7 = 11b only 8 = 11ac only.
gDot11Mode=0
# UAPSD service interval for VO,VI, BE, BK traffic
InfraUapsdVoSrvIntv=0
InfraUapsdViSrvIntv=0
InfraUapsdBeSrvIntv=0
InfraUapsdBkSrvIntv=0
# Flag to allow STA send AddTspec even when ACM is Off
gAddTSWhenACMIsOff=1
# ifdef VENDOR_EDIT
# Enable IMPS or not
#gEnableImps=1
# Enable BMPS or not
#gEnableBmps=1
#Flag to enable HostARPOffload feature or not
hostArpOffload=1
#Flag to enable HostNSOffload feature or not
hostNSOffload=1
# endif /* VENDOR_EDIT */
# 802.11n Protection flag
gEnableApProt=1
#Enable OBSS protection
gEnableApOBSSProt=1
#Enable/Disable UAPSD for SoftAP
gEnableApUapsd=1
# Maximum Tx power
# gTxPowerCap=30
# Fragmentation Threshold
# gFragmentationThreshold=2346
# RTS threshold
RTSThreshold=1048576
# Intra-BSS forward
gDisableIntraBssFwd=0
# WMM Enable/Disable
WmmIsEnabled=0
# 802.11d support
#ifdef VENDOR_EDIT
g11dSupportEnabled=1
#else
#g11dSupportEnabled=0
#endif /* VENDOR_EDIT */
# 802.11h support
g11hSupportEnabled=1
# DFS Master Capability
gEnableDFSMasterCap=1
# ESE Support and fast transition
# EseEnabled=0
ImplicitQosIsEnabled=0
gNeighborScanTimerPeriod=200
gNeighborLookupThreshold=76
gNeighborScanChannelMinTime=20
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
# To enable, set FastRoamEnabled=1
# To disable, set FastRoamEnabled=0
#FastRoamEnabled=1
# Check if the AP to which we are roaming is better than current AP in
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
# use this value as to how better the RSSI of the new/roamable AP should
# be for roaming
RoamRssiDiff=5
# To enable, set gRoamIntraBand=1 (Roaming within band)
# To disable, set gRoamIntraBand=0 (Roaming across band)
gRoamIntraBand=0
#Short Guard Interval Enable/disable
gShortGI20Mhz=1
gShortGI40Mhz=1
#Preferred band (both or 2.4 only or 5 only)
BandCapability=0
#Channel Bonding
gChannelBondingMode5GHz=1
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
#is idle for last 10 seconds.) For both active and power save clients.
#Power save clients: DUT set TIM bit from 10th second onwards and till client
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
#success still we try on 11th second if not tries on 12th and so on till 15th
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
#case DUT will detect client got removed in (10+5) seconds.
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
#it is period where we send NULL frame.
#gApLinkMonitorPeriod = 10
#gGoLinkMonitorPeriod = 10
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
#are succeed to send or not. Hence total effective detection time is
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
gGoKeepAlivePeriod = 20
#ifdef VENDOR_EDIT
gApKeepAlivePeriod = 20
#endif /* VENDOR_EDIT */
#If set to 0, will not scan DFS channels
gEnableDFSChnlScan=1
# Enable DFS channel roam
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
gAllowDFSChannelRoam=1
gVhtChannelWidth=2
#ifdef VENDOR_EDIT
#Data Inactivity Timeout when in powersave (in ms)
gDataInactivityTimeout=200
#endif /* VENDOR_EDIT */
# Set txchainmask and rxchainmask
# These parameters are used only if gEnable2x2 is 0
# Valid values are 1,2
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
gSetTxChainmask1x1=1
gSetRxChainmask1x1=1
# Scan Timing Parameters
# gPassiveMaxChannelTime=110
#ifdef VENDOR_EDIT
gActiveMaxChannelTime=60
gActiveMinChannelTime=40
#else
#gActiveMaxChannelTime=40
#gActiveMinChannelTime=20
#endif /* VENDOR_EDIT */
#If set to 0, MCC is not allowed.
gEnableMCCMode=1
# MCC to SCC Switch mode:
# 0-Disable
# 1-Enable
# 2-Force SCC if same band, with SAP restart
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
# without SAP restart by sending (E)CSA
gWlanMccToSccSwitchMode = 3
# 1=enable STBC; 0=disable STBC
gEnableRXSTBC=1
# 1=enable tx STBC; 0=disable
gEnableTXSTBC=1
# 1=enable rx LDPC; 0=disable
gEnableRXLDPC=1
#Enable/Disable Tx beamforming
gTxBFEnable=1
#Enable/Disable Tx beamformee in SAP mode
gEnableTxBFeeSAP=1
# Enable Tx beamforming in VHT20MHz
# Valid values are 0,1. If commented out, the default value is 0.
# 0=disable, 1=enable
gEnableTxBFin20MHz=1
#Enable/Disable SU Tx beamformer support
#gEnableTxSUBeamformer=1
gEnableFastRoamInConcurrency=1
# 802.11K support
gRrmEnable=1
#ifdef VENDOR_EDIT
#Enable Power Save offload
#gEnablePowerSaveOffload=1
#else
#gEnablePowerSaveOffload=2
#Enable firmware uart print
gEnablefwprint=0
#endif VENDOR_EDIT
# Firmware log mode
# Valid values are 0,1,2
# 0=Disable, 1=WMI, 2=DIAG
gEnablefwlog=1
# Maximum Receive AMPDU size (VHT only. Valid values:
# 0->8k 1->16k 2->32k 3->64k 4->128k)
gVhtAmpduLenExponent=7
# Maximum MPDU length (VHT only. Valid values:
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
gVhtMpduLen=2
# WOW Enable/Disable.
# 0 - Disable both magic pattern match and pattern byte match.
# 1 - Enable magic pattern match on all interfaces.
# 2 - Enable pattern byte match on all interfaces.
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
# Default value of gEnableWoW is 3.
# gEnableWoW=0
# Enable or Disable MCC Adaptive Scheduler at the FW
# 1=Enable (default), 0=Disable
gEnableMCCAdaptiveScheduler=1
#Enable or Disable p2p device address administered
isP2pDeviceAddrAdministrated=0
# Set Thermal Power limit
TxPower2g=10
TxPower5g=10
# Remove Overlap channel restriction
gEnableOverLapCh=0
#Enable VHT on 2.4Ghz
gEnableVhtFor24GHzBand=1
#Maximum number of offload peers supported
# gMaxOffloadPeers=2
# controlling the following offload patterns
# through ini parameter. Default value is 1
# to disable set it to zero. ssdp = 0
# Setup multicast pattern for mDNS 224.0.0.251,
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
ssdp=0
#Enable Memory Deep Sleep
gEnableMemDeepSleep=1
# RA filtering rate limit param, the current value would not
# help if the lifetime in RA is less than 3*60=3min. Then
# we need to change it, though it is uncommon.
# gRAFilterEnable=0
gRArateLimitInterval=600
# Maximum number of concurrent connections
gMaxConcurrentActiveSessions=3
# Disable/Enable GreenAP
# 0 to disable, 1 to enable, default: 1
gEnableGreenAp=0
#gPNOScanSupport=1
#Enable/Disable LPASS support
# 0 to disable, 1 to enable
gEnableLpassSupport=1
# Whether userspace country code setting shld have priority
gCountryCodePriority=1
# Enable(1)/Disable(0) SIFS burst
#ifdef VENDOR_EDIT
#Min: 0 disabled
#Max: 3 enabled802.11g
#Default: 1 enabled, but disabled for legacy mode
gEnableSifsBurst=3
#else
# gEnableSifsBurst=1
# endif /* VENDOR_EDIT */
# Enable or Disable Multi-user MIMO
# 1=Enable (default), 0=Disable
gEnableMuBformee=1
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
gIbssTxSpEndInactivityTime=10
# Enable support for TDLS
# 0 - disable
# 1 - enable
gEnableTDLSSupport=1
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
# and RSSI) is met and then will initiate teardown when teardown criteria
# (idle packet count and RSSI) is met.
# 0 - disable
# 1 - enable
gEnableTDLSImplicitTrigger=1
# Enable TDLS External Control. That is, user space application has to
# first configure a peer MAC in wlan driver towards which TDLS is desired.
# Device will establish TDLS only towards those configured peers whenever
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
# when teardown criteria (idle packet count and RSSI) is met. However,
# device will accept TDLS connection if it is initiated from any other peer,
# even if that peer is not configured.
# 0 - disable
# 1 - enable
# For TDLS External Control, Implicit Trigger must also be enabled.
gTDLSExternalControl=1
# Enable support for TDLS off-channel operation
# 0 - disable
# 1 - enable
# TDLS off-channel operation will be invoked when there is only one
# TDLS connection.
gEnableTDLSOffChannel=1
# Enable or Disable Random MAC (Spoofing)
# 1=Enable (default), 0=Disable
gEnableMacAddrSpoof=1
################ Datapath feature set Begin ################
# Bus bandwidth threshold values in terms of number of packets
gBusBandwidthHighThreshold=2000
gBusBandwidthMediumThreshold=500
gBusBandwidthLowThreshold=150
# Bus bandwidth compute timeout value in ms
gBusBandwidthComputeInterval=100
# VHT Tx/Rx MCS values
# Valid values are 0,1,2. If commented out, the default value is 0.
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
gVhtRxMCS=2
gVhtTxMCS=2
# VHT Tx/Rx MCS values for 2x2
# Valid values are 0,1,2. If commented out, the default value is 0.
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
gEnable2x2=1
gVhtRxMCS2x2=2
gVhtTxMCS2x2=2
#IPA config is a bit mask and following are the configurations.
#bit0 IPA Enable
#bit1 IPA PRE Filter enable
#bit2 IPv6 enable
#bit3 IPA Resource Manager (RM) enable
#bit4 IPA Clock scaling enable
#bit5 IPA uC ENABLE
#bit6 IPA uC STA ENABLE
#bit8 IPA Real Time Debugging
gIPAConfig=0x7d
gIPADescSize=800
# Enable/Disable RX full reorder offload
gReorderOffloadSupported=1
# Enable CE classification
# 1 - enable(default) 0 - disable
gCEClassifyEnable=1
# Enable Rx handling options
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
# DP_RX_THREAD=16 (1 << 4)
# 20 = (DP_RX_THREAD | NAPI)
rx_mode=20
# Enable(Tx) fastpath for data traffic.
# 1 - enable(default) 0 - disable
gEnableFastPath=1
# This flag enables IP, TCP and UDP checksum offload
# 1 - enable(default) 0 - disable
gEnableIpTcpUdpChecksumOffload=1
# Enable TCP Segmentation Offload
# 1 - enable 0 - disable
TSOEnable=1
# Enable Generic Receive Offload
# 1 - enable(default) 0 - disable
GROEnable=1
# Enable HT MPDU Density
# 4 for 2 micro sec
ght_mpdu_density=4
# Enable flow steering to enable multiple CEs for Rx flows.
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
# Parallel Rx paths.
# 1 - enable 0 - disable(default)
gEnableFlowSteering=1
# Time in microseconds after which a NAPI poll must yield
ce_service_max_yield_time=500
#Maximum number of HTT messages to be processed per NAPI poll
ce_service_max_rx_ind_flush=1
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
maxMSDUsPerRxInd=8
# Enable NUD tracking feature
# 1 - enable 0 - disable(default)
#ifndef VENDOR_EDIT
# richy.li@Connectivity, 2019/10/11, [Q porting] align the vowifi behavior with 18811.
#gEnableNUDTracking=1
#else
gEnableNUDTracking=0
#endif /* VENDOR_EDIT */
################ Datapath feature set End ################
################ NAN feature set start ###################
# Enable NAN discovery (NAN 1.0)
# 1 - enable 0 - disable(default)
gEnableNanSupport=1
# Enable NAN Datapath
genable_nan_datapath=1
################ NAN feature set end #####################
#ifdef VENDOR_EDIT
adaptive_dwell_mode_enabled=0
#else
#adaptive_dwell_mode_enabled=1
#endif /* VENDOR_EDIT */
hostscan_adaptive_dwell_mode=1
adapt_dwell_lpf_weight=80
adapt_dwell_wifi_act_threshold=10
MAWCEnabled=0
drop_bcn_on_chan_mismatch=0
# Enable/Disable rtt sta mac randomization
enable_rtt_mac_randomization=1
#Enable/Disable SNR monitoring
gEnableSNRMonitoring=1
# HTC Credit count for WMI operation
# 1 to serialize the WMI commands
# 0 default works with FW advertised credits, 2 credits usually
gWmiCreditCount=1
# Enable enhanced ACS
acs_with_more_param=1
# bits 0-3: rssi weight
# bits 4-7: bss count weight
# bits 8-11: noise floor weight
# bits 12-15: channel free weight
# bits 16-19: tx power range weight
# bits 20-23: tx power throughput weight
# bits 24-31: reserved
AutoChannelSelectWeight=0x00fafafa
# Enable/Disable broadcast TWT
bcast_twt=1
# Enable Runtime PM
gRuntimePM=1
# Enable broadcast logging to the userspace entities
gMulticastHostFwMsgs=1
# Disable packetlog explicitly
#ifndef VENDOR_EDIT
#gEnablePacketLog=0
#else
global_adapt_dwelltime_mode=1
roamscan_adaptive_dwell_mode=1
extscan_adaptive_dwell_mode=1
pnoscan_adaptive_dwell_mode=1
active_max_channel_time_2g=60
gcmp_enabled=0
gEnablePacketLog=1
#endif /* VENDOR_EDIT */
# Set IPA bandwidth levels in mbps
gIPALowBandwidthMbps=100
gIPAMediumBandwidthMbps=400
gIPAHighBandwidthMbps=800
spectral_disable=1
END
# Note: Configuration parser would not read anything past the END marker

3
wifi/wpa_supplicant_overlay.conf
View File

@@ -4,4 +4,5 @@ tdls_external_control=1
wowlan_triggers=magic_pkt wowlan_triggers=magic_pkt
bss_max_count=400 bss_max_count=400
interworking=1 interworking=1
driver_param=use_p2p_group_interface=1 config_methods=virtual_display virtual_push_button keypad
driver_param="no_rrm=1"