sm7250-common: Update wifi configs from OnePlusNordCE OxygenOS 11.0.4.4
This commit is contained in:
KakatkarAkshay
@@ -1,11 +1,11 @@
|
||||
# This file allows user to override the factory
|
||||
# for close wifi roam
|
||||
gEnableImps = 0
|
||||
gEnableBmps = 0
|
||||
# defaults for the WLAN Driver
|
||||
|
||||
# For close wifi roam
|
||||
gEnableImps=0
|
||||
gEnableBmps=0
|
||||
gRoamOffloadEnabled=0
|
||||
gRoamScanOffloadEnabled=0
|
||||
#Below ini copied from LA.UM.0.6.3
|
||||
fw_timeout_crash=1
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
||||
@@ -13,6 +13,13 @@ fw_timeout_crash=1
|
||||
# 7 = 11b only 8 = 11ac only.
|
||||
gDot11Mode=0
|
||||
|
||||
# Assigned MAC Addresses - This will be used until NV items are in place
|
||||
# Each byte of MAC address is represented in Hex format as XX
|
||||
Intf0MacAddress=000AF58989FF
|
||||
Intf1MacAddress=000AF58989FE
|
||||
Intf2MacAddress=000AF58989FD
|
||||
Intf3MacAddress=000AF58989FC
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
@@ -22,6 +29,17 @@ InfraUapsdBkSrvIntv=0
|
||||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
# Flags to filter Mcast and Bcast RX packets.
|
||||
# Value 0: No filtering, 1: Filter all Multicast.
|
||||
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
|
||||
McastBcastFilter=3
|
||||
|
||||
#Flag to enable HostARPOffload feature or not
|
||||
hostArpOffload=1
|
||||
|
||||
#Flag to enable HostNSOffload feature or not
|
||||
hostNSOffload=1
|
||||
|
||||
# 802.11n Protection flag
|
||||
gEnableApProt=1
|
||||
|
||||
@@ -31,6 +49,9 @@ gEnableApOBSSProt=1
|
||||
#Enable/Disable UAPSD for SoftAP
|
||||
gEnableApUapsd=1
|
||||
|
||||
# Fixed Rate
|
||||
gFixedRate=0
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
@@ -47,13 +68,13 @@ gDisableIntraBssFwd=0
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
g11dSupportEnabled=0
|
||||
#g11dSupportEnabled=0
|
||||
|
||||
# 802.11h support
|
||||
g11hSupportEnabled=1
|
||||
|
||||
# DFS Master Capability
|
||||
gEnableDFSMasterCap=1
|
||||
#gEnableDFSMasterCap=1
|
||||
|
||||
# ESE Support and fast transition
|
||||
EseEnabled=0
|
||||
@@ -63,12 +84,15 @@ ImplicitQosIsEnabled=0
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
gNeighborScanChannelMinTime=20
|
||||
gNeighborScanChannelMaxTime=30
|
||||
gMaxNeighborReqTries=3
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
# To disable, set FastRoamEnabled=0
|
||||
FastRoamEnabled=1
|
||||
|
||||
FastTransitionEnabled=0
|
||||
# Check if the AP to which we are roaming is better than current AP in
|
||||
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
|
||||
# use this value as to how better the RSSI of the new/roamable AP should
|
||||
@@ -83,6 +107,15 @@ gRoamIntraBand=0
|
||||
gShortGI20Mhz=1
|
||||
gShortGI40Mhz=1
|
||||
|
||||
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
|
||||
gAPAutoShutOff=0
|
||||
|
||||
#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
|
||||
gWlanAutoShutdown = 0
|
||||
|
||||
# Not used.
|
||||
gApAutoChannelSelection=0
|
||||
|
||||
#Preferred band (both or 2.4 only or 5 only)
|
||||
BandCapability=0
|
||||
|
||||
@@ -112,6 +145,11 @@ gChannelBondingMode5GHz=1
|
||||
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
|
||||
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
gGoKeepAlivePeriod = 20
|
||||
gApKeepAlivePeriod = 20
|
||||
|
||||
#If set will start with active scan after driver load, otherwise will start with
|
||||
#passive scan to find out the domain
|
||||
gEnableBypass11d=1
|
||||
|
||||
#If set to 0, will not scan DFS channels
|
||||
gEnableDFSChnlScan=1
|
||||
@@ -122,6 +160,12 @@ gAllowDFSChannelRoam=1
|
||||
|
||||
gVhtChannelWidth=2
|
||||
|
||||
#disable low data rate packet
|
||||
gEnableRTSProfiles=0
|
||||
|
||||
#Data Inactivity Timeout when in powersave (in ms)
|
||||
gDataInactivityTimeout=200
|
||||
|
||||
# Set txchainmask and rxchainmask
|
||||
# These parameters are used only if gEnable2x2 is 0
|
||||
# Valid values are 1,2
|
||||
@@ -132,7 +176,9 @@ gSetRxChainmask1x1=1
|
||||
|
||||
# Scan Timing Parameters
|
||||
# gPassiveMaxChannelTime=110
|
||||
gActiveMaxChannelTime=40
|
||||
# gPassiveMinChannelTime=60
|
||||
#gActiveMaxChannelTime=40
|
||||
#gActiveMinChannelTime=20
|
||||
|
||||
#If set to 0, MCC is not allowed.
|
||||
gEnableMCCMode=1
|
||||
@@ -166,14 +212,23 @@ gEnableTxBFeeSAP=1
|
||||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support
|
||||
gEnableTxSUBeamformer=0
|
||||
#Enable/Disable SU Tx beamformer support.
|
||||
gEnableTxSUBeamformer=1
|
||||
|
||||
gEnableFastRoamInConcurrency=1
|
||||
|
||||
#Maxium Channel time in msec
|
||||
gMaxMediumTime = 6000
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
#Enable Power Save offload
|
||||
#gEnablePowerSaveOffload=2
|
||||
|
||||
#Enable firmware uart print
|
||||
gEnablefwprint=0
|
||||
|
||||
# Firmware log mode
|
||||
# Valid values are 0,1,2
|
||||
# 0=Disable, 1=WMI, 2=DIAG
|
||||
@@ -187,6 +242,9 @@ gVhtAmpduLenExponent=7
|
||||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
# Maximum number of wow filters required
|
||||
#gMaxWoWFilters=22
|
||||
|
||||
# WOW Enable/Disable.
|
||||
# 0 - Disable both magic pattern match and pattern byte match.
|
||||
# 1 - Enable magic pattern match on all interfaces.
|
||||
@@ -225,6 +283,9 @@ ssdp=0
|
||||
#Enable Memory Deep Sleep
|
||||
gEnableMemDeepSleep=1
|
||||
|
||||
# Regulatory Setting; 0=STRICT; 1=CUSTOM
|
||||
gRegulatoryChangeCountry=1
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
@@ -238,6 +299,9 @@ gMaxConcurrentActiveSessions=3
|
||||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=0
|
||||
|
||||
# Radar PRI multiplier
|
||||
gDFSradarMappingPriMultiplier=4
|
||||
|
||||
gPNOScanSupport=1
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
@@ -248,12 +312,17 @@ gEnableLpassSupport=1
|
||||
gCountryCodePriority=1
|
||||
|
||||
# Enable(1)/Disable(0) SIFS burst
|
||||
gEnableSifsBurst=1
|
||||
#gEnableSifsBurst=1
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Enable/Disable channel avoidance for SAP in SCC scenario
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gSapSccChanAvoidance=0
|
||||
|
||||
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
||||
gIbssTxSpEndInactivityTime=10
|
||||
|
||||
@@ -291,7 +360,7 @@ gEnableTDLSOffChannel=1
|
||||
|
||||
# Enable or Disable Random MAC (Spoofing)
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMacAddrSpoof=1
|
||||
#gEnableMacAddrSpoof=1
|
||||
|
||||
################ Datapath feature set Begin ################
|
||||
# Bus bandwidth threshold values in terms of number of packets
|
||||
@@ -336,9 +405,7 @@ gCEClassifyEnable=1
|
||||
|
||||
# Enable Rx handling options
|
||||
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
||||
# DP_RX_THREAD=16 (1 << 4)
|
||||
# 20 = (DP_RX_THREAD | NAPI)
|
||||
rx_mode=20
|
||||
rx_mode=5
|
||||
|
||||
# Enable(Tx) fastpath for data traffic.
|
||||
# 1 - enable(default) 0 - disable
|
||||
@@ -375,9 +442,18 @@ ce_service_max_rx_ind_flush=1
|
||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
||||
maxMSDUsPerRxInd=8
|
||||
|
||||
# Enable NUD tracking feature
|
||||
#ifdef VENDOR_EDIT
|
||||
# swapnil.ranjan@Connectivity, 2020/03/26, [SM7250 Porting] align the vowifi behavior with 18865.
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNUDTracking=1
|
||||
#gEnableNUDTracking=1
|
||||
#else
|
||||
gEnableNUDTracking=0
|
||||
#endif VENDOR_EDIT
|
||||
|
||||
# Enable PEER UNMAP CONF SUPPORT
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnablePeerUnmapConfSupport=1
|
||||
|
||||
################ Datapath feature set End ################
|
||||
|
||||
################ NAN feature set start ###################
|
||||
@@ -390,7 +466,7 @@ genable_nan_datapath=1
|
||||
|
||||
################ NAN feature set end #####################
|
||||
|
||||
adaptive_dwell_mode_enabled=1
|
||||
#adaptive_dwell_mode_enabled=1
|
||||
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
@@ -400,48 +476,172 @@ adapt_dwell_wifi_act_threshold=10
|
||||
|
||||
MAWCEnabled=0
|
||||
|
||||
drop_bcn_on_chan_mismatch=0
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
#Enable/Disable SNR monitoring
|
||||
gEnableSNRMonitoring=1
|
||||
|
||||
# HTC Credit count for WMI operation
|
||||
# 1 to serialize the WMI commands
|
||||
# 0 default works with FW advertised credits, 2 credits usually
|
||||
gWmiCreditCount=1
|
||||
# Rx thread affinity mask in UL case
|
||||
RX_THREAD_UL_CPU_AFFINITY_MASK=0xc0
|
||||
|
||||
# Enable enhanced ACS
|
||||
acs_with_more_param=1
|
||||
# bits 0-3: rssi weight
|
||||
# bits 4-7: bss count weight
|
||||
# bits 8-11: noise floor weight
|
||||
# bits 12-15: channel free weight
|
||||
# bits 16-19: tx power range weight
|
||||
# bits 20-23: tx power throughput weight
|
||||
# bits 24-31: reserved
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
# ifdef VENDOR_EDIT
|
||||
etsi13_srd_chan_in_master_mode=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# Enable/Disable broadcast TWT
|
||||
bcast_twt=1
|
||||
# ifdef VENDOR_EDIT
|
||||
gEnableTDLSScan=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# Enable Runtime PM
|
||||
#gRuntimePM=1
|
||||
# ifdef VENDOR_EDIT
|
||||
#Removing the Rx beamforming for data stall improvement
|
||||
gEnableTxSUBeamformer=0
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# Enable broadcast logging to the userspace entities
|
||||
gMulticastHostFwMsgs=1
|
||||
# Disable packetlog explicitly
|
||||
gEnablePacketLog=0
|
||||
# ifdef VENDOR_EDIT
|
||||
gDualMacFeatureDisable=1
|
||||
gInitialScanNoDFSChnl=1
|
||||
#gInitialDwellTime=20
|
||||
gSoftApMaxPeers=8
|
||||
gRoamBmissFirstBcnt=15
|
||||
gRoamBmissFinalBcnt=25
|
||||
gDroppedPktDisconnectTh=1024
|
||||
# Runtime is default zero in hostdriver
|
||||
gRuntimePM=0
|
||||
gRAFilterEnable=0
|
||||
gMCAddrListEnable=1
|
||||
# 0: disable feature (default)
|
||||
# 1: drop all broadcast frames, except ARP
|
||||
# 2: drop all multicast frames, except ICMPv6
|
||||
# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
|
||||
gHwFilterMode=3
|
||||
gBpfFilterEnable=1
|
||||
#gFwDebugLogLevel=3
|
||||
#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
|
||||
#gChannelBondingMode24GHz=1
|
||||
gChannelBondingMode24GHz=0
|
||||
gForce1x1Exception=0
|
||||
gStaKeepAlivePeriod=30
|
||||
gper_roam_enabled=3
|
||||
gper_roam_th_percent=80
|
||||
gper_min_rssi_threshold_for_roam=70
|
||||
gItoRepeatCount=5
|
||||
gDisablePacketFilter=0
|
||||
#ifndef VENDOR_EDIT
|
||||
#g_enable_packet_filter_bitmap=3
|
||||
#else
|
||||
# for layer2(mac) multicast, layer3(ip) multicast filter
|
||||
g_enable_packet_filter_bitmap=7
|
||||
#endif /* VENDOR_EDIT */
|
||||
LROEnable=0
|
||||
gEnableModulatedDTIM=3
|
||||
gMaxLIModulatedDTIM=6
|
||||
#gActiveModeOffload=0
|
||||
gActionOUISwitchTo11nMode="FFFFFF 03 FFFFBF 20 21 40"
|
||||
gReportMaxLinkSpeed=2
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# Set IPA bandwidth levels in mbps
|
||||
gIPALowBandwidthMbps=100
|
||||
gIPAMediumBandwidthMbps=400
|
||||
gIPAHighBandwidthMbps=800
|
||||
spectral_disable=1
|
||||
#ifdef VENDOR_EDIT
|
||||
#g11dSupportEnabled=1
|
||||
#else
|
||||
g11dSupportEnabled=0
|
||||
#endif VENDOR_EDIT
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
gEnableDFSMasterCap=0
|
||||
#else
|
||||
#gEnableDFSMasterCap=1
|
||||
#endif VENDOR_EDIT
|
||||
|
||||
# RSSI threshold offset for 2G to 5G roam
|
||||
roam_bad_rssi_thresh_offset_2g=0
|
||||
|
||||
# Scan Timing Parameters
|
||||
# gPassiveMaxChannelTime=110
|
||||
# gPassiveMinChannelTime=60
|
||||
#ifdef VENDOR_EDIT
|
||||
gActiveMaxChannelTime=60
|
||||
gActiveMinChannelTime=40
|
||||
#else
|
||||
#gActiveMaxChannelTime=40
|
||||
#gActiveMinChannelTime=20
|
||||
#endif VENDOR_EDIT
|
||||
|
||||
#Enable Power Save offload
|
||||
#ifdef VENDOR_EDIT
|
||||
gEnablePowerSaveOffload=1
|
||||
#else
|
||||
#gEnablePowerSaveOffload=2
|
||||
#endif VENDOR_EDIT
|
||||
|
||||
# Enable(1)/Disable(0) SIFS burst
|
||||
#ifdef VENDOR_EDIT
|
||||
#Min: 0 disabled
|
||||
#Max: 3 enabled802.11g
|
||||
#Default: 1 enabled, but disabled for legacy mode
|
||||
gEnableSifsBurst=0
|
||||
#else
|
||||
# gEnableSifsBurst=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# Enable or Disable Random MAC (Spoofing)
|
||||
# 1=Enable (default), 0=Disable
|
||||
#ifdef VENDOR_EDIT
|
||||
gEnableMacAddrSpoof=1
|
||||
#else
|
||||
#gEnableMacAddrSpoof=0
|
||||
#endif VENDOR_EDIT
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
adaptive_dwell_mode_enabled=0
|
||||
#else
|
||||
#adaptive_dwell_mode_enabled=1
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# Enable/Disable DTIM Synth
|
||||
# 1- Enable DTIM Synth
|
||||
# 0- Disable DTIM Synth
|
||||
gEnableLPRx=0
|
||||
|
||||
#Action OUIs for 1x1 connection
|
||||
#Please do not remove the default values, append new OUIs in the end
|
||||
#Default=000C43 00 25 42 001018 06 02FFF02C0000 BC 25 42 001018 06 02FF040C0000 BC 25 42 00037F 00 35 6C
|
||||
#ifdef VENDOR_EDIT
|
||||
# Sync http://pgerrit.oneplus.cn:8080/#/c/200897/ for EID-4159 and http://pgerrit.oneplus.cn:8080/#/c/229408/ for ISTRACKING-19649
|
||||
#gActionOUIConnect1x1=000C43 00 25 42 001018 06 02FFF02C0000 BC 25 42 001018 06 02FF040C0000 BC 25 42 001018 06 02FF001C0000 BC 25 48 001018 06 0200000C0000 BC 25 42
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
#Action OUIs for ITO extension
|
||||
#Please do not remove the default values, append new OUIs in the end
|
||||
#Default=00037F 06 01010000FF7F FC 01 000AEB 02 0100 C0 01 000B86 03 010408 E0 01
|
||||
#gActionOUIITOExtension=00037F 06 01010000FF7F FC 01 000AEB 02 0100 C0 01 000B86 03 010408 E0 01
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
global_adapt_dwelltime_mode=1
|
||||
roamscan_adaptive_dwell_mode=1
|
||||
extscan_adaptive_dwell_mode=1
|
||||
pnoscan_adaptive_dwell_mode=1
|
||||
active_max_channel_time_2g=60
|
||||
|
||||
gcmp_enabled=0
|
||||
gEnablePacketLog=1
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
#Set EDCA parameters
|
||||
gEnableEdcaParams=1
|
||||
gEdcaVoCwmin=7
|
||||
gEdcaViCwmin=7
|
||||
gEdcaBkCwmin=7
|
||||
gEdcaBeCwmin=7
|
||||
gEdcaVoCwmax=15
|
||||
gEdcaViCwmax=15
|
||||
gEdcaBkCwmax=15
|
||||
gEdcaBeCwmax=15
|
||||
gEdcaVoAifs=2
|
||||
gEdcaViAifs=2
|
||||
gEdcaBkAifs=2
|
||||
gEdcaBeAifs=2
|
||||
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
|
||||
|
||||
Reference in New Issue
Block a user