180 lines
8.4 KiB
XML
180 lines
8.4 KiB
XML
<?xml version="1.0" encoding="utf-8"?>
|
|
<!--
|
|
Copyright (C) 2022 The LineageOS Project
|
|
SPDX-License-Identifier: Apache-2.0
|
|
-->
|
|
<resources>
|
|
|
|
<!-- Indicate whether closing the lid causes the device to go to sleep and opening
|
|
it causes the device to wake up.
|
|
The default is false. -->
|
|
<bool name="config_lidControlsSleep">true</bool>
|
|
|
|
<!-- True if home app should be pinned via Pinner Service -->
|
|
<bool name="config_pinnerHomeApp">true</bool>
|
|
|
|
<!-- Indicate whether to allow the device to suspend when the screen is off
|
|
due to the proximity sensor. This resource should only be set to true
|
|
if the sensor HAL correctly handles the proximity sensor as a wake-up source.
|
|
Otherwise, the device may fail to wake out of suspend reliably.
|
|
The default is false. -->
|
|
<bool name="config_suspendWhenScreenOffDueToProximity">true</bool>
|
|
|
|
<!-- Whether device supports double tap to wake -->
|
|
<bool name="config_supportDoubleTapWake">true</bool>
|
|
|
|
<!-- True if the device supports Sustained Performance Mode-->
|
|
<bool name="config_sustainedPerformanceModeSupported">true</bool>
|
|
|
|
<!-- Vibrator pattern for feedback about a long screen/key press -->
|
|
<integer-array name="config_longPressVibePattern">
|
|
<item>0</item>
|
|
<item>10</item>
|
|
</integer-array>
|
|
|
|
<!-- Vibrator pattern for feedback about touching a virtual key -->
|
|
<integer-array name="config_virtualKeyVibePattern">
|
|
<item>0</item>
|
|
<item>10</item>
|
|
</integer-array>
|
|
|
|
<!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
|
|
<integer-array name="config_keyboardTapVibePattern">
|
|
<item>10</item>
|
|
</integer-array>
|
|
|
|
<!-- Indicate available ColorDisplayManager.COLOR_MODE_xxx. -->
|
|
<integer-array name="config_availableColorModes">
|
|
<item>0</item>
|
|
<item>256</item>
|
|
<item>258</item>
|
|
<item>259</item>
|
|
</integer-array>
|
|
|
|
<!-- Default list of files pinned by the Pinner Service -->
|
|
<string-array translatable="false" name="config_defaultPinnerServiceFiles">
|
|
<item>"/apex/com.android.art/javalib/core-oj.jar"</item>
|
|
<item>"/apex/com.android.art/javalib/core-libart.jar"</item>
|
|
<item>"/system/bin/surfaceflinger"</item>
|
|
<item>"/system/framework/ext.jar"</item>
|
|
<item>"/system/framework/framework.jar"</item>
|
|
<item>"/system/framework/services.jar"</item>
|
|
<item>"/system/lib/libEGL.so"</item>
|
|
<item>"/system/lib/libGLESv1_CM.so"</item>
|
|
<item>"/system/lib/libGLESv2.so"</item>
|
|
<item>"/system/lib/libGLESv3.so"</item>
|
|
<item>"/system/lib/libgui.so"</item>
|
|
<item>"/system/lib/libhwui.so"</item>
|
|
<item>"/system/lib/libui.so"</item>
|
|
<item>"/system/lib/libvulkan.so"</item>
|
|
<item>"/system/lib64/libEGL.so"</item>
|
|
<item>"/system/lib64/libGLESv1_CM.so"</item>
|
|
<item>"/system/lib64/libGLESv2.so"</item>
|
|
<item>"/system/lib64/libGLESv3.so"</item>
|
|
<item>"/system/lib64/libgui.so"</item>
|
|
<item>"/system/lib64/libhwui.so"</item>
|
|
<item>"/system/lib64/libui.so"</item>
|
|
<item>"/system/lib64/libvulkan.so"</item>
|
|
<item>"/system_ext/priv-app/SystemUI/SystemUI.apk"</item>
|
|
<item>"/vendor/lib/egl/eglSubDriverAndroid.so"</item>
|
|
<item>"/vendor/lib/egl/libEGL_adreno.so"</item>
|
|
<item>"/vendor/lib/egl/libGLESv1_CM_adreno.so"</item>
|
|
<item>"/vendor/lib/egl/libGLESv2_adreno.so"</item>
|
|
<item>"/vendor/lib/hw/vulkan.adreno.so"</item>
|
|
<item>"/vendor/lib/libCB.so"</item>
|
|
<item>"/vendor/lib/libOpenCL.so"</item>
|
|
<item>"/vendor/lib/libadreno_utils.so"</item>
|
|
<item>"/vendor/lib/libgpudataproducer.so"</item>
|
|
<item>"/vendor/lib/libgsl.so"</item>
|
|
<item>"/vendor/lib/libllvm-glnext.so"</item>
|
|
<item>"/vendor/lib/libllvm-qcom.so"</item>
|
|
<item>"/vendor/lib64/libcamxexternalformatutils.so"</item>
|
|
<item>"/vendor/lib64/libipebpsstriping.so"</item>
|
|
<item>"/vendor/lib64/egl/eglSubDriverAndroid.so"</item>
|
|
<item>"/vendor/lib64/egl/libEGL_adreno.so"</item>
|
|
<item>"/vendor/lib64/egl/libGLESv1_CM_adreno.so"</item>
|
|
<item>"/vendor/lib64/egl/libGLESv2_adreno.so"</item>
|
|
<item>"/vendor/lib64/hw/vulkan.adreno.so"</item>
|
|
<item>"/vendor/lib64/libCB.so"</item>
|
|
<item>"/vendor/lib64/libOpenCL.so"</item>
|
|
<item>"/vendor/lib64/libadreno_utils.so"</item>
|
|
<item>"/vendor/lib64/libgpudataproducer.so"</item>
|
|
<item>"/vendor/lib64/libgsl.so"</item>
|
|
<item>"/vendor/lib64/libllvm-glnext.so"</item>
|
|
<item>"/vendor/lib64/libllvm-qcom.so"</item>
|
|
</string-array>
|
|
|
|
<!-- Screen brightness used to dim the screen while dozing in a very low power state.
|
|
May be less than the minimum allowed brightness setting
|
|
that can be set by the user. -->
|
|
<integer name="config_screenBrightnessDoze">17</integer>
|
|
|
|
<!-- Control whether the always on display mode is enabled by default. This value will be used
|
|
during initialization when the setting is still null. -->
|
|
<bool name="config_dozeAlwaysOnEnabled">false</bool>
|
|
|
|
<!-- Type of the udfps long press sensor. Empty if long press is not supported. -->
|
|
<string name="config_dozeUdfpsLongPressSensorType" translatable="false">org.lineageos.sensor.udfps</string>
|
|
|
|
<!-- Flag specifying whether WFC over IMS should be available for carrier: independent of
|
|
carrier provisioning. If false: hard disabled. If true: then depends on carrier
|
|
provisioning, availability etc -->
|
|
<bool name="config_carrier_wfc_ims_available">true</bool>
|
|
|
|
<!-- Whether the new Auto Selection Network UI should be shown -->
|
|
<bool name="config_enableNewAutoSelectNetworkUI">true</bool>
|
|
|
|
<!-- Safe headphone volume index. When music stream volume is below this index
|
|
the SPL on headphone output is compliant to EN 60950 requirements for portable music
|
|
players. -->
|
|
<integer name="config_safe_media_volume_index">18</integer>
|
|
|
|
<!-- Safe USB headset gain. This value is used to ensure that the SPL on the USB
|
|
headset output is compliant to EN 60950 requirements for portable music players. -->
|
|
<integer name="config_safe_media_volume_usb_mB">-1650</integer>
|
|
|
|
<!-- Power Management: Specifies whether to decouple the auto-suspend state of the
|
|
device from the display on/off state.
|
|
|
|
When false, autosuspend_disable() will be called before the display is turned on
|
|
and autosuspend_enable() will be called after the display is turned off.
|
|
This mode provides best compatibility for devices using legacy power management
|
|
features such as early suspend / late resume.
|
|
|
|
When true, autosuspend_display() and autosuspend_enable() will be called
|
|
independently of whether the display is being turned on or off. This mode
|
|
enables the power manager to suspend the application processor while the
|
|
display is on.
|
|
|
|
This resource should be set to "true" when a doze component has been specified
|
|
to maximize power savings but not all devices support it.
|
|
|
|
Refer to autosuspend.h for details.
|
|
-->
|
|
<bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool>
|
|
|
|
<!-- Enables or disables haptic effect when the text insertion/selection handle is moved
|
|
manually by the user. Off by default, since the expected haptic feedback may not be
|
|
available on some devices. -->
|
|
<bool name="config_enableHapticTextHandle">true</bool>
|
|
|
|
<!-- Whether device has warp charging support -->
|
|
<bool name="config_hasWarpCharger">true</bool>
|
|
|
|
<!-- Path to warp charging status file -->
|
|
<string name="config_WarpChargerStatusPath">/sys/devices/virtual/oplus_chg/battery/voocchg_ing</string>
|
|
|
|
<!-- Whether devices suports in-display fingerprint when screen is off -->
|
|
<bool name="config_supportScreenOffUdfps">true</bool>
|
|
|
|
<!-- If true, the display will be shifted around in ambient mode. -->
|
|
<bool name="config_enableBurnInProtection">true</bool>
|
|
|
|
<!-- Smart charging -->
|
|
<bool name="config_smartChargingAvailable">true</bool>
|
|
<string name="config_smartChargingSysfsNode" translatable="false">/sys/devices/virtual/oplus_chg/battery/mmi_charging_enable</string>
|
|
<string name="config_smartChargingSuspendValue" translatable="false">0</string>
|
|
<string name="config_smartChargingResumeValue" translatable="false">1</string>
|
|
|
|
</resources>
|