potter: fix gps configs

gps/etc/izat.conf

@@ -0,0 +1,213 @@
+#########################################
+# Log verbosity control for izat modules
+#########################################
+# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5
+IZAT_DEBUG_LEVEL = 2
+
+##################################################
+# Select WIFI Wait Timeout value in seconds for SUPL
+##################################################
+WIFI_WAIT_TIMEOUT_SELECT = 0
+
+################################
+# NLP Settings
+################################
+# NLP_MODE  1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred
+# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode
+# to determine how much Tolerance for first position
+# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode
+# to determine how much Tolerance for positions after first
+# NLP_THRESHOLD: Sets how many failures needed before
+# switching preferred NLP in Combo mode
+# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy
+# must be, in multiples, between two NLP location reports to
+# be considered much worse accuracy. Used in switching logic
+# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines
+# whether or not to still send network location requests to
+# QNP when the EULA is not consented to by the user. QNP can
+# still return ZPP locations or injected locations even
+# without EULA consent, but the uncertainty can be high.
+# QNP preferred mode prefers QNP when there is EULA consent,
+# otherwise OSNLP is used.
+NLP_MODE = 1
+NLP_MODE_EMERGENCY = 1
+NLP_TOLERANCE_TIME_FIRST = 5000
+NLP_TOLERANCE_TIME_AFTER = 20000
+NLP_THRESHOLD = 3
+NLP_ACCURACY_MULTIPLE = 2
+NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1
+OSNLP_PACKAGE = com.google.android.gms
+OSNLP_ACTION = com.android.location.service.v3.NetworkLocationProvider
+
+# Threshold period for ZPP triggers
+ZPP_TRIGGER_THRESHOLD=2147483647
+
+###################################
+# GEOFENCE SERVICES
+###################################
+# If set to one of the defined values below, it will override
+# the responsiveness for geofence services, which implements
+# the Proximity Alert API. If not set to a value defined below,
+# which is default, it will not override the responsivness.
+# The geofence HAL API is unaffected by this value.
+# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values:
+# 1: LOW responsiveness
+# 2: MEDIUM responsiveness
+# 3: HIGH responsiveness
+GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0
+
+#####################################
+# IZAT PREMIUM FEATURE SETTINGS
+#####################################
+#Possible states of a feature:
+#DISABLED
+#BASIC
+#PREMIUM
+
+#GTP_CELL_PROC valid options:
+# AP
+# MODEM
+GTP_CELL_PROC=MODEM
+
+#GTP_CELL valid modes:
+# DISABLED
+# BASIC
+GTP_CELL=DISABLED
+
+#GTP_WIFI valid modes:
+# DISABLED
+# BASIC
+GTP_WIFI=DISABLED
+
+#GTP_WAA valid modes:
+# DISABLED
+# BASIC
+GTP_WAA=DISABLED
+
+#SAP valid modes:
+# DISABLED
+# BASIC
+# PREMIUM
+SAP=DISABLED
+
+#ODCPI valid modes:
+#DISABLED
+#BASIC
+ODCPI=BASIC
+
+#FREE_WIFI_SCAN_INJECT valid modes:
+#DISABLED
+#BASIC
+FREE_WIFI_SCAN_INJECT=DISABLED
+
+#SUPL_WIFI valid modes:
+#DISABLED
+#BASIC
+SUPL_WIFI=DISABLED
+
+#WIFI_SUPPLICANT_INFO valid modes:
+#DISABLED
+#BASIC
+WIFI_SUPPLICANT_INFO=DISABLED
+
+#####################################
+# Location process launcher settings
+#####################################
+# DO NOT MODIFY
+# Modifying below attributes without
+# caution can have serious implications.
+
+#Values for PROCESS_STATE:
+# ENABLED
+# DISABLED
+
+#FEATURE MASKS:
+# GTP-WIFI    0X03
+# GTP-AP-CELL 0X0c
+# GTP-MP-CELL 0xc00
+# GTP-WAA     0X300
+# SAP         0Xc0
+# ODCPI      0x1000
+# FREE_WIFI_SCAN_INJECT   0x2000
+# SUPL_WIFI   0x4000
+# WIFI_SUPPLICANT_INFO   0x8000
+
+#Values for PLATFORMS can be:
+#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226
+#2. 'all' or 'all exclude' -> for All platforms
+#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937
+
+#Values for BASEBAND can be:
+#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2
+#2. 'all' or 'all exclude' -> for all basebands
+#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte
+
+#Valyes for LEAN_TARGETS can be:
+#ENABLED  -> if this process is supposed to run on lean and mean targets
+#DISABLED -> if this process is to be disabled on lean and mean targets
+PROCESS_NAME=/system/bin/garden_app
+PROCESS_ARGUMENT=-u 0 -q 0 -j 0 -g 0 -l 0 -Z 0 -T 1
+PROCESS_STATE=ENABLED
+PROCESS_GROUPS=gps net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+HARDWARE_TYPE=automotive
+
+PROCESS_NAME=/system/bin/gpsone_daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=inet net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0
+PLATFORMS=msm7630_fusion
+BASEBAND=svlte2a sglte sglte2
+LEAN_TARGETS=DISABLED
+HARDWARE_TYPE=all
+
+PROCESS_NAME=/system/bin/lowi-server
+PROCESS_ARGUMENT=
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=gps net_admin wifi inet qcom_diag net_raw
+PREMIUM_FEATURE=0
+IZAT_FEATURE_MASK=0xf303
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+HARDWARE_TYPE=all
+
+PROCESS_NAME=/system/bin/xtwifi-inet-agent
+PROCESS_ARGUMENT=
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=inet gps
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xc0f
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+HARDWARE_TYPE=all
+
+PROCESS_NAME=/system/bin/xtwifi-client
+PROCESS_ARGUMENT=
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=net_admin wifi inet gps net_raw rfs_shared
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xf0f
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+HARDWARE_TYPE=all
+
+PROCESS_NAME=/system/vendor/bin/slim_daemon
+PROCESS_ARGUMENT=
+PROCESS_STATE=DISABLED
+PROCESS_GROUPS=gps net_raw qcom_diag
+PREMIUM_FEATURE=1
+IZAT_FEATURE_MASK=0xf0
+PLATFORMS=all
+BASEBAND=all
+LEAN_TARGETS=DISABLED
+HARDWARE_TYPE=all
+