potter: update config files
This commit is contained in:
Vachounet
135
configs/camera/msm8953_mot_potter_camera.xml
Normal file
135
configs/camera/msm8953_mot_potter_camera.xml
Normal file
@@ -0,0 +1,135 @@
|
||||
<!--
|
||||
Copyright (c) 2015 Qualcomm Technologies, Inc.
|
||||
All Rights Reserved.
|
||||
Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
-->
|
||||
<!--
|
||||
CameraModuleConfig :
|
||||
This node must be added for each module prosent in the device.
|
||||
It contain all information about the module present.
|
||||
The number of nodes of CameraModuleConfig indicate number of modules
|
||||
to be probed on the device.
|
||||
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
|
||||
|
||||
*CameraId :
|
||||
Camera Id is the Slot number in which the mode is plugged.
|
||||
Valid values are 0, 1, 2 and 3.
|
||||
*SensorName :
|
||||
Name of the sensor present on the module.
|
||||
The sensor library name should be of the form libmmcamera_<SensorName>.so
|
||||
ActuatorName :
|
||||
Name of the actuator on this module.
|
||||
The actuator library name should be of the form libactuator_<ActuatorName>.so.
|
||||
If there is no actuator remove the <ActuatorName> node.
|
||||
EepromName :
|
||||
Name of the eeprom on this module.
|
||||
Eeprom lib name should be of the form libmmcamera_<EepromName>_eeprom.so
|
||||
If there is no eeprom remove the <EepromName> node.
|
||||
FlashName :
|
||||
Name of the flash on this module.
|
||||
The flash library name should be of the form libflash_<FlashName>.so.
|
||||
If there is no flash remove the <FlashName> node.
|
||||
ChromatixName :
|
||||
Name of the tuning xml file.
|
||||
Tuning file contains the list of chromatix library names.
|
||||
If there is no tuning xml file remove the <ChromatixName> node.
|
||||
Position :
|
||||
Position of the sensor module. Valid values are 0, 1 and 2.
|
||||
For CAMERA_POSITION_BACK use 0.
|
||||
For CAMERA_POSITION_FRONT use 1.
|
||||
For CAMERA_POSITON_BACK_AUX use 2.
|
||||
MountAngle :
|
||||
Angle at which the sensor is mounted. Valid values are 0, 90, 180, 270 and 360.
|
||||
To use default mountangle mentioned in kernel use 360.
|
||||
|
||||
CsiInfo : This node contains information about the receiver configuration.
|
||||
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
|
||||
|
||||
*CSIDCore :
|
||||
CSID core to receive the data. Valid values are 0, 1, 2 and 3.
|
||||
*LaneMask :
|
||||
Mask to mention which lane is enabled.
|
||||
LaneMask[0] for DL0.
|
||||
LaneMask[1] for CLK.
|
||||
LaneMask[2] for DL1.
|
||||
LaneMask[3] for DL2.
|
||||
LaneMask[4] for DL3
|
||||
*LaneAssign :
|
||||
Number which describes the lane mapping between sensor and PHY.
|
||||
LaneAssign[0:3] is sensor lane number connected to data lane 0 of a PHY on the MSM side
|
||||
LaneAssign[4:7] is sensor lane number connected to data lane 2 of a PHY on the MSM side
|
||||
LaneAssign[8:11] is sensor lane number connected to data lane 3 of a PHY on the MSM side
|
||||
LaneAssign[12:15] is sensor lane number connected to data lane 4 of a PHY on the MSM side
|
||||
|
||||
NOTE : Lane 1 is reserved for the clock lane. Wiring and setting it to a data lane is prohibited.
|
||||
ComboMode :
|
||||
Flag to enable combo mode.
|
||||
This flag is enabled if multiple sensors are using same CSI-PHY receiver
|
||||
|
||||
LensInfo : Information of the lens present in the module.
|
||||
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
|
||||
|
||||
*FocalLength :
|
||||
FocalLength of the lens in micometers.
|
||||
Distance between the center of curvature to the focal point.
|
||||
*FNumber :
|
||||
FNumber of the lens.
|
||||
*TotalFocusDistance : The total distance in meters the lens could focus.
|
||||
*HorizontalViewAngle : HorizontalViewAngle in degrees
|
||||
*VerticalViewAngle : VerticalViewAngle in degrees
|
||||
*MinFocusDistance : Minimum distance in meters the lens could focus.
|
||||
|
||||
*VARIABLES MARKED WITH ASTRICK (*) ARE MANDATORY.
|
||||
|
||||
-->
|
||||
|
||||
<CameraConfigurationRoot>
|
||||
<CameraModuleConfig>
|
||||
<CameraId>1</CameraId>
|
||||
<SensorName>mot_imx362</SensorName>
|
||||
<EepromName>imx362</EepromName>
|
||||
<ActuatorName>mot_ak7371</ActuatorName>
|
||||
<FlashName>pmic</FlashName>
|
||||
<ChromatixName>mot_imx362_chromatix</ChromatixName>
|
||||
<ModesSupported>1</ModesSupported>
|
||||
<Position>BACK</Position>
|
||||
<MountAngle>90</MountAngle>
|
||||
<CSIInfo>
|
||||
<CSIDCore>0</CSIDCore>
|
||||
<LaneMask>0x1F</LaneMask>
|
||||
<LaneAssign>0x4320</LaneAssign>
|
||||
<ComboMode>0</ComboMode>
|
||||
</CSIInfo>
|
||||
<LensInfo>
|
||||
<FocalLength>4.28</FocalLength>
|
||||
<FNumber>1.7</FNumber>
|
||||
<TotalFocusDistance>0.187</TotalFocusDistance>
|
||||
<HorizontalViewAngle>65.0</HorizontalViewAngle>
|
||||
<VerticalViewAngle>51.0</VerticalViewAngle>
|
||||
<MinFocusDistance>0.1</MinFocusDistance>
|
||||
</LensInfo>
|
||||
</CameraModuleConfig>
|
||||
<CameraModuleConfig>
|
||||
<CameraId>2</CameraId>
|
||||
<SensorName>mot_ov5695</SensorName>
|
||||
<EepromName>ov5695</EepromName>
|
||||
<ChromatixName>mot_ov5695_chromatix</ChromatixName>
|
||||
<ModesSupported>1</ModesSupported>
|
||||
<Position>FRONT</Position>
|
||||
<MountAngle>270</MountAngle>
|
||||
<CSIInfo>
|
||||
<CSIDCore>2</CSIDCore>
|
||||
<LaneMask>0x07</LaneMask>
|
||||
<LaneAssign>0x4320</LaneAssign>
|
||||
<ComboMode>0</ComboMode>
|
||||
</CSIInfo>
|
||||
<LensInfo>
|
||||
<FocalLength>2.44</FocalLength>
|
||||
<FNumber>2.2</FNumber>
|
||||
<TotalFocusDistance>1.26</TotalFocusDistance>
|
||||
<HorizontalViewAngle>72.95</HorizontalViewAngle>
|
||||
<VerticalViewAngle>57.60</VerticalViewAngle>
|
||||
<MinFocusDistance>0.1</MinFocusDistance>
|
||||
</LensInfo>
|
||||
</CameraModuleConfig>
|
||||
</CameraConfigurationRoot>
|
||||
Reference in New Issue
Block a user