159 lines
4.1 KiB
Plaintext
159 lines
4.1 KiB
Plaintext
#gps_conf_from_sim.conf
|
|
|
|
#XTRA_SERVER_1=https://xtrapath2.izatcloud.net/xtra2.bin
|
|
#XTRA_SERVER_2=https://xtrapath2.izatcloud.net/xtra2.bin
|
|
#XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra2.bin
|
|
|
|
# _SET = 1
|
|
# _CLEAR = 0
|
|
ERR_ESTIMATE=0
|
|
|
|
#NTP server
|
|
NTP_SERVER=time.izatcloud.net
|
|
|
|
#XTRA CA path
|
|
XTRA_CA_PATH=/system/etc/security/cacerts
|
|
|
|
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
|
|
# 4 - Debug, 5 - Verbose
|
|
# If DEBUG_LEVEL is commented, Android's logging levels will be used
|
|
DEBUG_LEVEL = 2
|
|
|
|
# Intermediate position report, 1=enable, 0=disable
|
|
#INTERMEDIATE_POS=0
|
|
|
|
# supl version 1.0
|
|
#SUPL_VER=0x20000
|
|
|
|
# Emergency SUPL, 1=enable, 0=disable
|
|
#SUPL_ES=0
|
|
|
|
#Choose PDN for Emergency SUPL
|
|
#1 - Use emergency PDN
|
|
#0 - Use regular SUPL PDN for Emergency SUPL
|
|
#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0
|
|
|
|
# SUPL Mode (0=Standalone, 1=MSB, 2=MSA)
|
|
#SUPL_MODE=1
|
|
|
|
# GPS Capabilities bit mask
|
|
# SCHEDULING = 0x01
|
|
# MSB = 0x02
|
|
# MSA = 0x04
|
|
# ON_DEMAND_TIME = 0x10
|
|
# GEOFENCE = 0x20
|
|
# MEASUREMENTS = 0x40
|
|
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE | MEASUREMENTS
|
|
CAPABILITIES=0x77
|
|
|
|
# Accuracy threshold for intermediate positions
|
|
# less accurate positions are ignored, 0 for passing all positions
|
|
# ACCURACY_THRES=5000
|
|
|
|
################################
|
|
##### AGPS server settings #####
|
|
################################
|
|
|
|
# FOR SUPL SUPPORT, set the following
|
|
# SUPL_HOST=supl.host.com or IP
|
|
# SUPL_PORT=1234
|
|
|
|
# FOR C2K PDE SUPPORT, set the following
|
|
# C2K_HOST=c2k.pde.com or IP
|
|
# C2K_PORT=1234
|
|
|
|
####################################
|
|
# LTE Positioning Profile Settings
|
|
####################################
|
|
# 0: Enable RRLP on LTE(Default)
|
|
# 1: Enable LPP_User_Plane on LTE
|
|
# 2: Enable LPP_Control_Plane
|
|
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
|
|
#LPP_PROFILE = 0
|
|
|
|
################################
|
|
# EXTRA SETTINGS
|
|
################################
|
|
# NMEA provider (1=Modem Processor, 0=Application Processor)
|
|
#NMEA_PROVIDER=0
|
|
# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
|
|
#SGLTE_TARGET=0
|
|
|
|
##################################################
|
|
# Select Positioning Protocol on A-GLONASS system
|
|
##################################################
|
|
# 0x1: RRC CPlane
|
|
# 0x2: RRLP UPlane
|
|
# 0x4: LLP Uplane
|
|
#A_GLONASS_POS_PROTOCOL_SELECT = 0
|
|
|
|
##################################################
|
|
# Select technology for LPPe Control Plane
|
|
##################################################
|
|
# 0x1: DBH for LPPe CP
|
|
# 0x2: WLAN AP Measurements for LPPe CP
|
|
#LPPE_CP_TECHNOLOGY = 0
|
|
|
|
##################################################
|
|
# Select technology for LPPe User Plane
|
|
##################################################
|
|
# 0x1: DBH for LPPe UP
|
|
# 0x2: WLAN AP Measurements for LPPe UP
|
|
#LPPE_UP_TECHNOLOGY = 0
|
|
|
|
##################################################
|
|
# AGPS_CONFIG_INJECT
|
|
##################################################
|
|
# enable/disable injection of AGPS configurations:
|
|
# SUPL_VER
|
|
# SUPL_HOST
|
|
# SUPL_PORT
|
|
# C2K_HOST
|
|
# C2K_PORT
|
|
# LPP_PROFILE
|
|
# A_GLONASS_POS_PROTOCOL_SELECT
|
|
# 0: disable
|
|
# 1: enable
|
|
#AGPS_CONFIG_INJECT = 1
|
|
# AP Coarse Timestamp Uncertainty
|
|
##################################################
|
|
# default : 10
|
|
# or as per clock uncertainty of product
|
|
#AP_TIMESTAMP_UNCERTAINTY = 10
|
|
|
|
#####################################
|
|
# GNSS PPS settings
|
|
#####################################
|
|
#AP DR engine availability status
|
|
# 0 : NO AP DR (default)
|
|
# 1 : AP DR enabled
|
|
#EXTERNAL_DR_ENABLED = 0
|
|
|
|
#####################################
|
|
#DR_SYNC Pulse Availability
|
|
#####################################
|
|
# 0 : DR_SYNC pulse not available (default)
|
|
# 1 : DR_SYNC pulse available
|
|
#DR_SYNC_ENABLED = 0
|
|
|
|
#####################################
|
|
#PPS Device name
|
|
#####################################
|
|
#PPS_DEVICENAME = /dev/pps0
|
|
|
|
#####################################
|
|
#AP Clock Accuracy
|
|
#####################################
|
|
#AP_CLOCK_PPM = 100
|
|
|
|
#####################################
|
|
#MAX ms difference to detect missing pulse
|
|
#####################################
|
|
#MISSING_PULSE_TIME_DELTA = 900
|
|
|
|
#####################################
|
|
#Propagation time uncertainty
|
|
#####################################
|
|
#PROPAGATION_TIME_UNCERTAINTY = 1
|
|
|