psmattas/device_motorola_sanders-lineage
Archived
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update configs for NFC 1.1

Browse Source
This commit is contained in:
Alberto97
2018-08-11 17:41:34 +02:00
committed by therootlord
parent 69a37182f8
commit cfa0f46b2e
2 changed files with 34 additions and 444 deletions
Download Patch File Download Diff File Expand all files Collapse all files

303
configs/libnfc-nci.conf
View File

@@ -1,183 +1,23 @@
###################### Start of libnfc-common.conf #######################
# NXP Base Ver 8.0.E
############################################################################### ###############################################################################
# Application options # Application options
NFC_DEBUG_ENABLED=0 NFC_DEBUG_ENABLED=0
###############################################################################
# performance measurement
# Change this setting to control how often USERIAL log the performance (throughput)
# data on read/write/poll
# defailt is to log performance dara for every 100 read or write
#REPORT_PERFORMANCE_MEASURE=100
############################################################################### ###############################################################################
# File used for NFA storage # File used for NFA storage
NFA_STORAGE="/data/vendor/nfc" NFA_STORAGE="/data/vendor/nfc"
###############################################################################
# Snooze Mode Settings
#
# By default snooze mode is enabled. Set SNOOZE_MODE_CFG byte[0] to 0
# to disable.
#
# If SNOOZE_MODE_CFG is not provided, the default settings are used:
# They are as follows:
# 8 Sleep Mode (0=Disabled 1=UART 8=SPI/I2C)
# 0 Idle Threshold Host
# 0 Idle Threshold HC
# 0 NFC Wake active mode (0=ActiveLow 1=ActiveHigh)
# 1 Host Wake active mode (0=ActiveLow 1=ActiveHigh)
#
#SNOOZE_MODE_CFG={08:00:00:00:01}
###############################################################################
# Insert a delay in milliseconds after NFC_WAKE and before write to NFCC
#NFC_WAKE_DELAY=20
###############################################################################
# Various Delay settings (in ms) used in USERIAL
# POWER_ON_DELAY
# Delay after turning on chip, before writing to transport (default 300)
# PRE_POWER_OFF_DELAY
# Delay after deasserting NFC-Wake before turn off chip (default 0)
# POST_POWER_OFF_DELAY
# Delay after turning off chip, before USERIAL_close returns (default 0)
#
#POWER_ON_DELAY=300
#PRE_POWER_OFF_DELAY=0
#POST_POWER_OFF_DELAY=0
###############################################################################
# Maximum time (ms) to wait for RESET NTF after setting REG_PU to high
# The default is 1000.
#NFCC_ENABLE_TIMEOUT=0
###############################################################################
# LPTD mode configuration
# byte[0] is the length of the remaining bytes in this value
# if set to 0, LPTD params will NOT be sent to NFCC (i.e. disabled).
# byte[1] is the param id it should be set to B9.
# byte[2] is the length of the LPTD parameters
# byte[3] indicates if LPTD is enabled
# if set to 0, LPTD will be disabled (parameters will still be sent).
# byte[4-n] are the LPTD parameters.
# By default, LPTD is enabled and default settings are used.
# See nfc_hal_dm_cfg.c for defaults
#LPTD_CFG={23:B9:21:01:02:FF:FF:04:A0:0F:40:00:80:02:02:10:00:00:00:31:0C:30:00:00:00:00:00:00:00:00:00:00:00:00:00:00}
###############################################################################
# Startup Configuration (100 bytes maximum)
#
# For the 0xCA parameter, byte[9] (marked by 'AA') is for UICC0, and byte[10] (marked by BB) is
# for UICC1. The values are defined as:
# 0 : UICCx only supports ISO_DEP in low power mode.
# 2 : UICCx only supports Mifare in low power mode.
# 3 : UICCx supports both ISO_DEP and Mifare in low power mode.
#
# AA BB
#NFA_DM_START_UP_CFG={1F:CB:01:01:A5:01:01:CA:14:00:00:00:00:06:E8:03:00:00:00:00:00:00:00:00:00:00:00:00:00:80:01:01}
###############################################################################
# Startup Vendor Specific Configuration (100 bytes maximum);
# byte[0] TLV total len = 0x5
# byte[1] NCI_MTS_CMD|NCI_GID_PROP = 0x2f
# byte[2] NCI_MSG_FRAME_LOG = 0x9
# byte[3] 2
# byte[4] 0=turn off RF frame logging; 1=turn on
# byte[5] 0=turn off SWP frame logging; 1=turn on
# NFA_DM_START_UP_VSC_CFG={05:2F:09:02:01:01}
###############################################################################
# Antenna Configuration - This data is used when setting 0xC8 config item
# at startup (before discovery is started). If not used, no value is sent.
#
# The settings for this value are documented here:
# http://wcgbu.broadcom.com/wpan/PM/Project%20Document%20Library/bcm20791B0/
# Design/Doc/PHY%20register%20settings/BCM20791-B2-1027-02_PHY_Recommended_Reg_Settings.xlsx
# This document is maintained by Paul Forshaw.
#
# The values marked as ?? should be tweaked per antenna or customer/app:
# {20:C8:1E:06:??:00:??:??:??:00:??:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:??:01:00:00:40:04}
# array[0] = 0x20 is length of the payload from array[1] to the end
# array[1] = 0xC8 is PREINIT_DSP_CFG
#PREINIT_DSP_CFG={20:C8:1E:06:1F:00:0F:03:3C:00:04:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:48:01:00:00:40:04}
###############################################################################
# Configure crystal frequency when internal LPO can't detect the frequency.
#XTAL_FREQUENCY=0
###############################################################################
# Configure the default Destination Gate used by HCI (the default is 4, which
# is the ETSI loopback gate.
NFA_HCI_DEFAULT_DEST_GATE=0xF0
###############################################################################
# Configure the single default SE to use. The default is to use the first
# SE that is detected by the stack. This value might be used when the phone
# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use
# one of them (e.g. 0xF4).
#ACTIVE_SE=0xF3
###############################################################################
# Configure the default NfcA/IsoDep techology and protocol route. Can be
# either a secure element (e.g. 0xF4) or the host (0x00)
#DEFAULT_ISODEP_ROUTE=0x00
###############################################################################
# Configure the NFC Extras to open and use a static pipe. If the value is
# not set or set to 0, then the default is use a dynamic pipe based on a
# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value
# for each UICC (where F3="UICC0" and F4="UICC1")
#NFA_HCI_STATIC_PIPE_ID_F3=0x70
#NFA_HCI_STATIC_PIPE_ID_01=0x19
NFA_HCI_STATIC_PIPE_ID_C0=0x19
NFA_HCI_STATIC_PIPE_ID_02=0x20
###############################################################################
# When disconnecting from Oberthur secure element, perform a warm-reset of
# the secure element to deselect the applet.
# The default hex value of the command is 0x3. If this variable is undefined,
# then this feature is not used.
#OBERTHUR_WARM_RESET_COMMAND=0x03
############################################################################### ###############################################################################
# Force UICC to only listen to the following technology(s). # Force UICC to only listen to the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
UICC_LISTEN_TECH_MASK=0x07 UICC_LISTEN_TECH_MASK=0x07
###############################################################################
# Forcing HOST to listen for a selected protocol
# 0x00 : Disable Host Listen
# 0x01 : Enable Host to Listen (A) for ISO-DEP tech A
# 0x02 : Enable Host to Listen (B) for ISO-DEP tech B
# 0x04 : Enable Host to Listen (F) for T3T Tag Type Protocol tech F
# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
HOST_LISTEN_TECH_MASK=0x07
###############################################################################
# Enabling/Disabling Forward functionality
# Disable 0x00
# Enable 0x01
NXP_FWD_FUNCTIONALITY_ENABLE=0x01
###############################################################################
# Allow UICC to be powered off if there is no traffic.
# Timeout is in ms. If set to 0, then UICC will not be powered off.
#UICC_IDLE_TIMEOUT=30000
UICC_IDLE_TIMEOUT=0
############################################################################### ###############################################################################
# AID for Empty Select command # AID for Empty Select command
# If specified, this AID will be substituted when an Empty SELECT command is # If specified, this AID will be substituted when an Empty SELECT command is
# detected. The first byte is the length of the AID. Maximum length is 16. # detected. The first byte is the length of the AID. Maximum length is 16.
AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00} AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
###############################################################################
# This setting allows you to disable registering the T4t Virtual SE that causes
# the NFCC to send PPSE requests to the DH.
# The default setting is enabled (i.e. T4t Virtual SE is registered).
#REGISTER_VIRTUAL_SE=1
############################################################################### ###############################################################################
# When screen is turned off, specify the desired power state of the controller. # When screen is turned off, specify the desired power state of the controller.
# 0: power-off-sleep state; DEFAULT # 0: power-off-sleep state; DEFAULT
@@ -185,118 +25,6 @@ AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) # 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
SCREEN_OFF_POWER_STATE=1 SCREEN_OFF_POWER_STATE=1
###############################################################################
# Firmware patch file
# If the value is not set then patch download is disabled.
#FW_PATCH="/vendor/firmware/bcm2079x_firmware.ncd"
###############################################################################
# Firmware pre-patch file (sent before the above patch file)
# If the value is not set then pre-patch is not used.
#FW_PRE_PATCH="/vendor/firmware/bcm2079x_pre_firmware.ncd"
###############################################################################
# Firmware patch format
# 1 = HCD
# 2 = NCD (default)
#NFA_CONFIG_FORMAT=2
###############################################################################
# SPD Debug mode
# If set to 1, any failure of downloading a patch will trigger a hard-stop
#SPD_DEBUG=0
###############################################################################
# SPD Max Retry Count
# The number of attempts to download a patch before giving up (defualt is 3).
# Note, this resets after a power-cycle.
#SPD_MAX_RETRY_COUNT=3
###############################################################################
# transport driver
#
# TRANSPORT_DRIVER=<driver>
#
# where <driver> can be, for example:
# "/dev/ttyS" (UART)
# "/dev/bcmi2cnfc" (I2C)
# "hwtun" (HW Tunnel)
# "/dev/bcmspinfc" (SPI)
# "/dev/btusb0" (BT USB)
#TRANSPORT_DRIVER="/dev/bcm2079x-i2c"
###############################################################################
# power control driver
# Specify a kernel driver that support ioctl commands to control NFC_EN and
# NFC_WAKE gpio signals.
#
# POWER_CONTRL_DRIVER=<driver>
# where <driver> can be, for example:
# "/dev/nfcpower"
# "/dev/bcmi2cnfc" (I2C)
# "/dev/bcmspinfc" (SPI)
# i2c and spi driver may be used to control NFC_EN and NFC_WAKE signal
#POWER_CONTROL_DRIVER="/dev/bcm2079x-i2c"
###############################################################################
# I2C transport driver options
# Mako does not support 10-bit I2C addresses
# Revert to 7-bit address
#BCMI2CNFC_ADDRESS=0x77
###############################################################################
# I2C transport driver try to read multiple packets in read() if data is available
# remove the comment below to enable this feature
#READ_MULTIPLE_PACKETS=1
###############################################################################
# SPI transport driver options
#SPI_NEGOTIATION={0A:F0:00:01:00:00:00:FF:FF:00:00}
###############################################################################
# UART transport driver options
#
# PORT=1,2,3,...
# BAUD=115200, 19200, 9600, 4800,
# DATABITS=8, 7, 6, 5
# PARITY="even" | "odd" | "none"
# STOPBITS="0" | "1" | "1.5" | "2"
#UART_PORT=2
#UART_BAUD=115200
#UART_DATABITS=8
#UART_PARITY="none"
#UART_STOPBITS="1"
###############################################################################
# Insert a delay in microseconds per byte after a write to NFCC.
# after writing a block of data to the NFCC, delay this an amopunt of time before
# writing next block of data. the delay is calculated as below
# NFC_WRITE_DELAY * (number of byte written) / 1000 milliseconds
# e.g. after 259 bytes is written, delay (259 * 20 / 1000) 5 ms before next write
#NFC_WRITE_DELAY=20
###############################################################################
# Maximum Number of Credits to be allowed by the NFCC
# This value overrides what the NFCC specifices allowing the host to have
# the control to work-around transport limitations. If this value does
# not exist or is set to 0, the NFCC will provide the number of credits.
MAX_RF_DATA_CREDITS=1
###############################################################################
# Default poll duration (in ms)
# The defualt is 500ms if not set (see nfc_target.h)
#NFA_DM_DISC_DURATION_POLL=333
###############################################################################
# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1.
# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
# 2 NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate
# 3 NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0
# 4 NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3
PRESENCE_CHECK_ALGORITHM=1
############################################################################### ###############################################################################
# Force tag polling for the following technology(s). # Force tag polling for the following technology(s).
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
@@ -330,15 +58,6 @@ P2P_LISTEN_TECH_MASK=0xC4
PRESERVE_STORAGE=0x01 PRESERVE_STORAGE=0x01
###############################################################################
# NCI Hal Module name
NCI_HAL_MODULE="nfc_nci.pn54x"
##############################################################################
# Deactivate notification wait time out in seconds used in ETSI Reader mode
# 0 - Infinite wait
NFA_DM_DISC_NTF_TIMEOUT=100
############################################################################### ###############################################################################
# AID_MATCHING constants # AID_MATCHING constants
# AID_MATCHING_EXACT_ONLY 0x00 # AID_MATCHING_EXACT_ONLY 0x00
@@ -346,26 +65,4 @@ NFA_DM_DISC_NTF_TIMEOUT=100
# AID_MATCHING_PREFIX_ONLY 0x02 # AID_MATCHING_PREFIX_ONLY 0x02
AID_MATCHING_MODE=0x01 AID_MATCHING_MODE=0x01
###############################################################################
# Default Secure Element route id
DEFAULT_OFFHOST_ROUTE=0x02
###############################################################################
# Vendor Specific Proprietary Protocol & Discovery Configuration
# Set to 0xFF if unsupported
# byte[0] NCI_PROTOCOL_18092_ACTIVE
# byte[1] NCI_PROTOCOL_B_PRIME
# byte[2] NCI_PROTOCOL_DUAL
# byte[3] NCI_PROTOCOL_15693
# byte[4] NCI_PROTOCOL_KOVIO
# byte[5] NCI_PROTOCOL_MIFARE
# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
NFA_PROPRIETARY_CFG={05:FF:FF:06:81:80:70:FF:FF}
#################################################################################
# Bail out mode
# If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
NFA_POLL_BAIL_OUT_MODE=0x01
################################################################################# #################################################################################

175
configs/libnfc-nxp.conf
View File

@@ -20,6 +20,7 @@ NXPLOG_NCIX_LOGLEVEL=0x03
NXPLOG_NCIR_LOGLEVEL=0x03 NXPLOG_NCIR_LOGLEVEL=0x03
NXPLOG_FWDNLD_LOGLEVEL=0x03 NXPLOG_FWDNLD_LOGLEVEL=0x03
NXPLOG_TML_LOGLEVEL=0x03 NXPLOG_TML_LOGLEVEL=0x03
NFC_DEBUG_ENABLED=0x00
############################################################################### ###############################################################################
# Nfc Device Node name # Nfc Device Node name
@@ -32,20 +33,15 @@ NXP_NFC_DEV_NODE="/dev/pn544"
MIFARE_READER_ENABLE=0x01 MIFARE_READER_ENABLE=0x01
############################################################################### ###############################################################################
# Vzw Feature enable # Firmware file type
# Disabled - 0x00 #.so file 0x01
# Enabled - 0x01 #.bin file 0x02
VZW_FEATURE_ENABLE=0x01 NXP_FW_TYPE=0x01
###############################################################################
# File name for Firmware
NXP_FW_NAME="libpn548ad_fw.so"
############################################################################### ###############################################################################
# System clock source selection configuration # System clock source selection configuration
#define CLK_SRC_XTAL 1 #define CLK_SRC_XTAL 1
#define CLK_SRC_PLL 2 #define CLK_SRC_PLL 2
NXP_SYS_CLK_SRC_SEL=0x01 NXP_SYS_CLK_SRC_SEL=0x01
############################################################################### ###############################################################################
@@ -56,7 +52,6 @@ NXP_SYS_CLK_SRC_SEL=0x01
#define CLK_FREQ_26MHZ 4 #define CLK_FREQ_26MHZ 4
#define CLK_FREQ_38_4MHZ 5 #define CLK_FREQ_38_4MHZ 5
#define CLK_FREQ_52MHZ 6 #define CLK_FREQ_52MHZ 6
NXP_SYS_CLK_FREQ_SEL=0x00 NXP_SYS_CLK_FREQ_SEL=0x00
############################################################################### ###############################################################################
@@ -72,19 +67,6 @@ NXP_ACT_PROP_EXTN={2F, 02, 00}
# NFC forum profile settings # NFC forum profile settings
NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
###############################################################################
# NFCC Configuration Control
# Allow NFCC to manage RF Config 0x01
# Don't allow NFCC to manage RF Config 0x00
NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01}
###############################################################################
# Standby enable settings
# Disabled - 0x00
# Enabled - 0x01
NXP_CORE_STANDBY={2F, 00, 01, 01}
############################################################################### ###############################################################################
# NXP TVDD configurations settings # NXP TVDD configurations settings
# Allow NFCC to configure the external TVDD # Allow NFCC to configure the external TVDD
@@ -409,13 +391,6 @@ NXP_RF_CONF_BLK_5={
###############################################################################
## Set configuration optimization decision setting
## Enable = 0x01
## Disable = 0x00
NXP_SET_CONFIG_ALWAYS=0x01
############################################################################### ###############################################################################
# Core configuration extensions # Core configuration extensions
# It includes # It includes
@@ -504,107 +479,27 @@ NXP_CORE_CONF={20, 02, 2A, 0E,
32, 01, 60 32, 01, 60
} }
###############################################################################
# Mifare Classic Key settings
#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5,
# A0, 52, 06, D3, F7, D3, F7, D3, F7,
# A0, 53, 06, FF, FF, FF, FF, FF, FF,
# A0, 54, 06, 00, 00, 00, 00, 00, 00}
###############################################################################
# Default SE Options
# No secure element 0x00
# eSE 0x01
# UICC 0x02
NXP_DEFAULT_SE=0x02
############################################################################### ###############################################################################
#Enable SWP full power mode when phone is power off #Enable SWP full power mode when phone is power off
NXP_SWP_FULL_PWR_ON=0x00 NXP_SWP_FULL_PWR_ON=0x00
############################################################################### ###############################################################################
#### Select the CHIP #### #Set the default Felica T3T System Code OffHost route Location :
#PN547C2 0x01 # host 0x00
#PN65T 0x02 # UICC 0x02
#PN548AD 0x03 # UICC2 0x03
#PN66T 0x04 DEFAULT_SYS_CODE_ROUTE=0x02
NXP_NFC_CHIP=0x03
############################################################################### ###############################################################################
# CE when Screen state is locked #Set the Felica T3T System Code Power state :
# Disable 0x00
# Enable 0x01
NXP_CE_ROUTE_STRICT_DISABLE=0x01
###############################################################################
# Timeout in secs to get NFCEE Discover notification
NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
NXP_DEFAULT_NFCEE_TIMEOUT=0x06
###############################################################################
# SWP Reader feature
# Timeout in seconds
NXP_SWP_RD_START_TIMEOUT=0x0A
#Timeout in secs
NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
###############################################################################
#Set the default AID route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_AID_ROUTE=0x02
###############################################################################
#Set the Mifare Desfire route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_DESFIRE_ROUTE=0x02
###############################################################################
#Set the Mifare CLT route Location :
#This settings will be used when application does not set this parameter
# host 0x00
# eSE 0x01
# UICC 0x02
DEFAULT_MIFARE_CLT_ROUTE=0x02
###############################################################################
#Set the default AID Power state :
#This settings will be used when application does not set this parameter #This settings will be used when application does not set this parameter
# bit pos 0 = Switch On # bit pos 0 = Switch On
# bit pos 1 = Switch Off # bit pos 1 = Switch Off
# bit pos 2 = Battery Off # bit pos 2 = Battery Off
# bit pos 3 = Screen Lock # bit pos 3 = Screen On lock
# bit pos 4 = Screen Off # bit pos 4 = Screen off unlock
DEFAULT_AID_PWR_STATE=0x19 # bit pos 5 = Screen Off lock
DEFAULT_SYS_CODE_PWR_STATE=0x19
###############################################################################
#Set the Mifare Desfire Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Lock
# bit pos 4 = Screen Off
DEFAULT_DESFIRE_PWR_STATE=0x1B
###############################################################################
#Set the Mifare CLT Power state :
#This settings will be used when application does not set this parameter
# bit pos 0 = Switch On
# bit pos 1 = Switch Off
# bit pos 2 = Battery Off
# bit pos 3 = Screen Lock
# bit pos 4 = Screen Off
DEFAULT_MIFARE_CLT_PWR_STATE=0x1B
############################################################################### ###############################################################################
# AID Matching platform options # AID Matching platform options
@@ -627,29 +522,27 @@ NXP_CHINA_TIANJIN_RF_ENABLED=0x01
NXP_SWP_SWITCH_TIMEOUT=0x0A NXP_SWP_SWITCH_TIMEOUT=0x0A
############################################################################### ###############################################################################
#Dynamic RSSI feature enable # Vendor Specific Proprietary Protocol & Discovery Configuration
# Disable 0x00 # Set to 0xFF if unsupported
# Enable 0x01 # byte[0] NCI_PROTOCOL_18092_ACTIVE
NXP_AGC_DEBUG_ENABLE=0x00 # byte[1] NCI_PROTOCOL_B_PRIME
# byte[2] NCI_PROTOCOL_DUAL
# byte[3] NCI_PROTOCOL_15693
# byte[4] NCI_PROTOCOL_KOVIO
# byte[5] NCI_PROTOCOL_MIFARE
# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, 70, FF, FF}
############################################################################### ###############################################################################
# UICC mode supported # Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1.
# Disable 0x00 # 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
# Enable 0x01 # 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
NXP_DUAL_UICC_ENABLE=0x00 # 2 NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate
# 3 NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0
############################################################################### # 4 NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3
#Config to allow adding aids PRESENCE_CHECK_ALGORITHM=1
#NFC on/off is required after this config
#1 = enabling adding aid to NFCC routing table.
#0 = disabling adding aid to NFCC routing table.
NXP_ENABLE_ADD_AID=0x01
###############################################################################
# Enable/Disable checking default proto SE Id
# Disable 0x00
# Enable 0x01
NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
################################################################################ ################################################################################
# Restriction of Type A UICC baud rate # Restriction of Type A UICC baud rate