Update configs for NFC 1.1
This commit is contained in:
Alberto97
@@ -20,6 +20,7 @@ NXPLOG_NCIX_LOGLEVEL=0x03
|
||||
NXPLOG_NCIR_LOGLEVEL=0x03
|
||||
NXPLOG_FWDNLD_LOGLEVEL=0x03
|
||||
NXPLOG_TML_LOGLEVEL=0x03
|
||||
NFC_DEBUG_ENABLED=0x00
|
||||
|
||||
###############################################################################
|
||||
# Nfc Device Node name
|
||||
@@ -32,20 +33,15 @@ NXP_NFC_DEV_NODE="/dev/pn544"
|
||||
MIFARE_READER_ENABLE=0x01
|
||||
|
||||
###############################################################################
|
||||
# Vzw Feature enable
|
||||
# Disabled - 0x00
|
||||
# Enabled - 0x01
|
||||
VZW_FEATURE_ENABLE=0x01
|
||||
|
||||
###############################################################################
|
||||
# File name for Firmware
|
||||
NXP_FW_NAME="libpn548ad_fw.so"
|
||||
# Firmware file type
|
||||
#.so file 0x01
|
||||
#.bin file 0x02
|
||||
NXP_FW_TYPE=0x01
|
||||
|
||||
###############################################################################
|
||||
# System clock source selection configuration
|
||||
#define CLK_SRC_XTAL 1
|
||||
#define CLK_SRC_PLL 2
|
||||
|
||||
NXP_SYS_CLK_SRC_SEL=0x01
|
||||
|
||||
###############################################################################
|
||||
@@ -56,7 +52,6 @@ NXP_SYS_CLK_SRC_SEL=0x01
|
||||
#define CLK_FREQ_26MHZ 4
|
||||
#define CLK_FREQ_38_4MHZ 5
|
||||
#define CLK_FREQ_52MHZ 6
|
||||
|
||||
NXP_SYS_CLK_FREQ_SEL=0x00
|
||||
|
||||
###############################################################################
|
||||
@@ -72,19 +67,6 @@ NXP_ACT_PROP_EXTN={2F, 02, 00}
|
||||
# NFC forum profile settings
|
||||
NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
|
||||
|
||||
###############################################################################
|
||||
# NFCC Configuration Control
|
||||
# Allow NFCC to manage RF Config 0x01
|
||||
# Don't allow NFCC to manage RF Config 0x00
|
||||
NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01}
|
||||
|
||||
###############################################################################
|
||||
# Standby enable settings
|
||||
# Disabled - 0x00
|
||||
# Enabled - 0x01
|
||||
NXP_CORE_STANDBY={2F, 00, 01, 01}
|
||||
|
||||
|
||||
###############################################################################
|
||||
# NXP TVDD configurations settings
|
||||
# Allow NFCC to configure the external TVDD
|
||||
@@ -409,13 +391,6 @@ NXP_RF_CONF_BLK_5={
|
||||
|
||||
|
||||
|
||||
###############################################################################
|
||||
## Set configuration optimization decision setting
|
||||
## Enable = 0x01
|
||||
## Disable = 0x00
|
||||
NXP_SET_CONFIG_ALWAYS=0x01
|
||||
|
||||
|
||||
###############################################################################
|
||||
# Core configuration extensions
|
||||
# It includes
|
||||
@@ -504,107 +479,27 @@ NXP_CORE_CONF={20, 02, 2A, 0E,
|
||||
32, 01, 60
|
||||
}
|
||||
|
||||
###############################################################################
|
||||
# Mifare Classic Key settings
|
||||
#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5,
|
||||
# A0, 52, 06, D3, F7, D3, F7, D3, F7,
|
||||
# A0, 53, 06, FF, FF, FF, FF, FF, FF,
|
||||
# A0, 54, 06, 00, 00, 00, 00, 00, 00}
|
||||
|
||||
###############################################################################
|
||||
# Default SE Options
|
||||
# No secure element 0x00
|
||||
# eSE 0x01
|
||||
# UICC 0x02
|
||||
|
||||
NXP_DEFAULT_SE=0x02
|
||||
|
||||
###############################################################################
|
||||
#Enable SWP full power mode when phone is power off
|
||||
NXP_SWP_FULL_PWR_ON=0x00
|
||||
|
||||
###############################################################################
|
||||
#### Select the CHIP ####
|
||||
#PN547C2 0x01
|
||||
#PN65T 0x02
|
||||
#PN548AD 0x03
|
||||
#PN66T 0x04
|
||||
|
||||
NXP_NFC_CHIP=0x03
|
||||
#Set the default Felica T3T System Code OffHost route Location :
|
||||
# host 0x00
|
||||
# UICC 0x02
|
||||
# UICC2 0x03
|
||||
DEFAULT_SYS_CODE_ROUTE=0x02
|
||||
|
||||
###############################################################################
|
||||
# CE when Screen state is locked
|
||||
# Disable 0x00
|
||||
# Enable 0x01
|
||||
NXP_CE_ROUTE_STRICT_DISABLE=0x01
|
||||
|
||||
###############################################################################
|
||||
# Timeout in secs to get NFCEE Discover notification
|
||||
NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
|
||||
|
||||
NXP_DEFAULT_NFCEE_TIMEOUT=0x06
|
||||
|
||||
###############################################################################
|
||||
# SWP Reader feature
|
||||
# Timeout in seconds
|
||||
NXP_SWP_RD_START_TIMEOUT=0x0A
|
||||
|
||||
#Timeout in secs
|
||||
NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
|
||||
|
||||
###############################################################################
|
||||
#Set the default AID route Location :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# host 0x00
|
||||
# eSE 0x01
|
||||
# UICC 0x02
|
||||
DEFAULT_AID_ROUTE=0x02
|
||||
|
||||
###############################################################################
|
||||
#Set the Mifare Desfire route Location :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# host 0x00
|
||||
# eSE 0x01
|
||||
# UICC 0x02
|
||||
DEFAULT_DESFIRE_ROUTE=0x02
|
||||
|
||||
###############################################################################
|
||||
#Set the Mifare CLT route Location :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# host 0x00
|
||||
# eSE 0x01
|
||||
# UICC 0x02
|
||||
DEFAULT_MIFARE_CLT_ROUTE=0x02
|
||||
|
||||
###############################################################################
|
||||
#Set the default AID Power state :
|
||||
#Set the Felica T3T System Code Power state :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# bit pos 0 = Switch On
|
||||
# bit pos 1 = Switch Off
|
||||
# bit pos 2 = Battery Off
|
||||
# bit pos 3 = Screen Lock
|
||||
# bit pos 4 = Screen Off
|
||||
DEFAULT_AID_PWR_STATE=0x19
|
||||
|
||||
###############################################################################
|
||||
#Set the Mifare Desfire Power state :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# bit pos 0 = Switch On
|
||||
# bit pos 1 = Switch Off
|
||||
# bit pos 2 = Battery Off
|
||||
# bit pos 3 = Screen Lock
|
||||
# bit pos 4 = Screen Off
|
||||
DEFAULT_DESFIRE_PWR_STATE=0x1B
|
||||
|
||||
###############################################################################
|
||||
#Set the Mifare CLT Power state :
|
||||
#This settings will be used when application does not set this parameter
|
||||
# bit pos 0 = Switch On
|
||||
# bit pos 1 = Switch Off
|
||||
# bit pos 2 = Battery Off
|
||||
# bit pos 3 = Screen Lock
|
||||
# bit pos 4 = Screen Off
|
||||
DEFAULT_MIFARE_CLT_PWR_STATE=0x1B
|
||||
# bit pos 3 = Screen On lock
|
||||
# bit pos 4 = Screen off unlock
|
||||
# bit pos 5 = Screen Off lock
|
||||
DEFAULT_SYS_CODE_PWR_STATE=0x19
|
||||
|
||||
###############################################################################
|
||||
# AID Matching platform options
|
||||
@@ -627,29 +522,27 @@ NXP_CHINA_TIANJIN_RF_ENABLED=0x01
|
||||
NXP_SWP_SWITCH_TIMEOUT=0x0A
|
||||
|
||||
###############################################################################
|
||||
#Dynamic RSSI feature enable
|
||||
# Disable 0x00
|
||||
# Enable 0x01
|
||||
NXP_AGC_DEBUG_ENABLE=0x00
|
||||
# Vendor Specific Proprietary Protocol & Discovery Configuration
|
||||
# Set to 0xFF if unsupported
|
||||
# byte[0] NCI_PROTOCOL_18092_ACTIVE
|
||||
# byte[1] NCI_PROTOCOL_B_PRIME
|
||||
# byte[2] NCI_PROTOCOL_DUAL
|
||||
# byte[3] NCI_PROTOCOL_15693
|
||||
# byte[4] NCI_PROTOCOL_KOVIO
|
||||
# byte[5] NCI_PROTOCOL_MIFARE
|
||||
# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
|
||||
# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
|
||||
# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
|
||||
NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, 70, FF, FF}
|
||||
|
||||
###############################################################################
|
||||
# UICC mode supported
|
||||
# Disable 0x00
|
||||
# Enable 0x01
|
||||
NXP_DUAL_UICC_ENABLE=0x00
|
||||
|
||||
###############################################################################
|
||||
#Config to allow adding aids
|
||||
#NFC on/off is required after this config
|
||||
#1 = enabling adding aid to NFCC routing table.
|
||||
#0 = disabling adding aid to NFCC routing table.
|
||||
NXP_ENABLE_ADD_AID=0x01
|
||||
|
||||
###############################################################################
|
||||
# Enable/Disable checking default proto SE Id
|
||||
# Disable 0x00
|
||||
# Enable 0x01
|
||||
NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
|
||||
# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1.
|
||||
# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
|
||||
# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
|
||||
# 2 NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate
|
||||
# 3 NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0
|
||||
# 4 NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3
|
||||
PRESENCE_CHECK_ALGORITHM=1
|
||||
|
||||
################################################################################
|
||||
# Restriction of Type A UICC baud rate
|
||||
|
||||
Reference in New Issue
Block a user