# Chipset-specific init settings
on boot
    # Change permission for type C params
    chown root oem_5004 /sys/devices/soc/78b6000.i2c/i2c-2/2-0022/CC_state
    chown root oem_5004 /sys/devices/soc/78b6000.i2c/i2c-2/2-0022/enable_vconn

# Change ownership and permission for AMPS factory testing
    chown root oem_5004 /sys/class/i2c-adapter/i2c-2/2-002d/enable
    chmod 0660 /sys/class/i2c-adapter/i2c-2/2-002d/enable
    chown root oem_5004 /sys/class/i2c-adapter/i2c-2/2-002d/hsic_vdd
    chmod 0660 /sys/class/i2c-adapter/i2c-2/2-002d/hsic_vdd

    # Change permission for fingerprint sensor
    chown system oem_5004 /sys/devices/soc/soc:fpc_fpc1020/nav
    chown system oem_5004 /sys/devices/soc/soc:fpc_fpc1020/dev_enable
    chown system oem_5004 /sys/devices/soc/soc:fpc_fpc1020/irq
    chown system oem_5004 /sys/devices/soc/soc:fpc_fpc1020/irq_cnt
    chmod 0440 /sys/devices/soc/soc:fpc_fpc1020/irq_cnt
    chown system oem_5004 /sys/bus/spi/devices/spi8.0/nav
    chown system oem_5004 /sys/bus/spi/devices/spi8.0/clk_enable
    chown system oem_5004 /sys/bus/spi/devices/spi8.0/dev_enable
    chown system oem_5004 /sys/bus/spi/devices/spi8.0/irq
    chown system oem_5004 /sys/bus/spi/devices/spi8.0/irq_cnt
    chmod 0440 /sys/bus/spi/devices/spi8.0/irq_cnt

on post-fs-data
    #setup folder for WLAN WAPI
    chmod 0770 /data/wapi_certificate

    # This dir only for preinstall app so libs
    mkdir /data/app-lib2 0771 system system

on moto-charger
    setprop ro.board.platform msm8953
    load_system_props
    trigger firmware_mounts_complete
    start  qcom-post-boot
    start vendor.gbmodinstall
    start vendor.charge_only_mode
    start vendor.batt_health
    start vendor.thermal-com
    start system_suspend

# Set hub drive strength to +5%
on property:ro.bootmode=normal
   write /sys/module/usb3813_hub/parameters/boost_val 3