softap: sdk: Add 'vendor.' prefix to wlan.driver.config

* In 126af66b04,
  the prop wlan.driver.config was renamed to vendor.wlan.driver.config.
  Therefore, make the same change on softap as well.

Change-Id: I696d851c8ecd35ec42cf680149c402b3b8044cfc

softap/sdk/qsap_api.c

@@ -90,9 +90,7 @@ s8 *Cmd_req[eCMD_REQ_LAST] = {
   */
 s8 *Conf_req[CONF_REQ_LAST] = {
     "dual2g",
-    "dual5g",
+    "dual5g"
-    "owe",
-    "60g",
 };
 
 /*
@@ -187,11 +185,6 @@ static struct Command cmd_list[eCMD_LAST] = {
     { "wowlan_triggers",       "any"            },
     { "accept_mac_file",       NULL             },
     { "deny_mac_file",         NULL             },
-    { "owe_transition_ifname", NULL             },
-    { "sae_require_mfp",       NULL             },
-    { "ieee80211ax",           NULL             },
-    { "enable_edmg",           NULL             },
-    { "edmg_channel",          NULL             },
 
 };
 
@@ -219,7 +212,7 @@ struct Command qsap_str[eSTR_LAST] = {
 
 /** Supported operating mode */
 char *hw_mode[HW_MODE_UNKNOWN] = {
-    "b", "g", "n", "g-only", "n-only", "a", "any", "ad"
+    "b", "g", "n", "g-only", "n-only", "a", "any"
 };
 
 /** configuration file path */
@@ -1923,7 +1916,6 @@ static esap_cmd_t qsap_get_cmd_num(s8 *cName)
 
     for(i=0; i<eCMD_LAST; i++)     {
         len = strlen(cmd_list[i].name);
-
         if(!strncmp(cmd_list[i].name, cName, len)) {
             if((cName[len] == '=') || (cName[len] == '\0'))
                 return i;
@@ -2519,10 +2511,6 @@ static int qsap_set_operating_mode(s32 mode, s8 *pmode, int pmode_len, s8 *tbuf,
             ulen = *tlen;
             qsap_write_cfg(pcfg, &cmd_list[eCMD_IEEE80211N],ieee11n_disable, tbuf, &ulen, HOSTAPD_CONF_QCOM_FILE);
             break;
-        case HW_MODE_AD:
-            /** For 802.11ad, disable the 802.11 HT */
-            qsap_change_cfg(pcfg, &cmd_list[eCMD_HT_CAPAB], DISABLE);
-            break;
     }
     if(mode == HW_MODE_G_ONLY || mode == HW_MODE_N_ONLY || mode == HW_MODE_N ) {
         qsap_scnprintf(pmode, pmode_len, "%s",hw_mode[HW_MODE_G]);
@@ -2610,12 +2598,6 @@ static void qsap_handle_set_request(s8 *pcmd, s8 *presp, u32 *plen)
     } else if (!(strncmp(pcmd, Conf_req[CONF_5g], strlen(Conf_req[CONF_5g])))) {
            pcmd += strlen(Conf_req[CONF_5g]);
            SKIP_BLANK_SPACE(pcmd);
-    } else if (!(strncmp(pcmd, Conf_req[CONF_owe], strlen(Conf_req[CONF_owe])))) {
-           pcmd += strlen(Conf_req[CONF_owe]);
-           SKIP_BLANK_SPACE(pcmd);
-    } else if (!(strncmp(pcmd, Conf_req[CONF_60g], strlen(Conf_req[CONF_60g])))) {
-           pcmd += strlen(Conf_req[CONF_60g]);
-           SKIP_BLANK_SPACE(pcmd);
     } else {
 	    // DO NOTHING
     }
@@ -3190,10 +3172,6 @@ void qsap_hostd_exec_cmd(s8 *pcmd, s8 *presp, u32 *plen)
            pconffile = CONFIG_FILE_2G;
        } else if (!(strncmp(pcmd+4, Conf_req[CONF_5g], strlen(Conf_req[CONF_5g])))) {
            pconffile = CONFIG_FILE_5G;
-       } else if (!(strncmp(pcmd+4, Conf_req[CONF_owe], strlen(Conf_req[CONF_owe])))) {
-           pconffile = CONFIG_FILE_OWE;
-       } else if (!(strncmp(pcmd+4, Conf_req[CONF_60g], strlen(Conf_req[CONF_60g])))) {
-           pconffile = CONFIG_FILE_60G;
        } else {
            pconffile = CONFIG_FILE;
        }
@@ -3252,11 +3230,8 @@ int qsapsetSoftap(int argc, char *argv[])
         ALOGD("ARG: %d - %s\n", i+1, argv[i]);
     }
 
-    // check if 2nd arg is dual2g/dual5g/owe/60g
+    // check if 2nd arg is dual2g/dual5g
-    if (argc > 2
+    if (argc > 2 && (strncmp(argv[2], Conf_req[CONF_2g], 4) == 0)) {
-         && (strncmp(argv[2], Conf_req[CONF_2g], 4) == 0
-             || strncmp(argv[2], Conf_req[CONF_owe], 3) == 0
-             || strncmp(argv[2], Conf_req[CONF_60g], 3) == 0)) {
             snprintf(setCmd, SET_BUF_LEN, "set %s", argv[2]);
             offset = 1;
             argc--;

softap/sdk/qsap_api.h

@@ -91,25 +91,21 @@ enum error_val {
 /** Configuration file name for SAP+SAP*/
 #define CONFIG_FILE_2G "/data/vendor/wifi/hostapd/hostapd_dual2g.conf"
 #define CONFIG_FILE_5G "/data/vendor/wifi/hostapd/hostapd_dual5g.conf"
-#define CONFIG_FILE_60G "/data/vendor/wifi/hostapd/hostapd_60g.conf"
-
-/** Configuration file name for OWE-transition */
-#define CONFIG_FILE_OWE "/data/vendor/wifi/hostapd/hostapd_owe.conf"
 
 /** Configuration file name */
 #define CONFIG_FILE "/data/vendor/wifi/hostapd/hostapd.conf"
 
 /** Default configuration file path */
-#define DEFAULT_CONFIG_FILE_PATH "/vendor/etc/hostapd/hostapd_default.conf"
+#define DEFAULT_CONFIG_FILE_PATH "/system/etc/hostapd/hostapd_default.conf"
 
 /** Default Accept list file name */
-#define DEFAULT_ACCEPT_LIST_FILE_PATH "/vendor/etc/hostapd/hostapd.accept"
+#define DEFAULT_ACCEPT_LIST_FILE_PATH "/system/etc/hostapd/hostapd.accept"
 
 /** Accept list file name */
 #define ACCEPT_LIST_FILE "/data/vendor/wifi/hostapd/hostapd.accept"
 
 /** Default Deny list file name */
-#define DEFAULT_DENY_LIST_FILE_PATH "/vendor/etc/hostapd/hostapd.deny"
+#define DEFAULT_DENY_LIST_FILE_PATH "/system/etc/hostapd/hostapd.deny"
 
 /** Deny list file name */
 #define DENY_LIST_FILE "/data/vendor/wifi/hostapd/hostapd.deny"
@@ -256,8 +252,6 @@ enum eCmd_req {
 enum eConf_req {
     CONF_2g = 0,
     CONF_5g = 1,
-    CONF_owe = 2,
-    CONF_60g = 3,
 
     CONF_REQ_LAST
 };
@@ -360,13 +354,6 @@ typedef enum esap_cmd {
     eCMD_WOWLAN_TRIGGERS     = 80,
     eCMD_ACCEPT_MAC_FILE     = 81,
     eCMD_DENY_MAC_FILE       = 82,
-    eCMD_OWE_TRANS_IFNAME    = 83,
-    eCMD_SAE_REQUIRE_MPF     = 84,
-
-    eCMD_IEEE80211AX         = 85,
-
-    eCMD_ENABLE_EDMG         = 86,
-    eCMD_EDMG_CHANNEL        = 87,
 
     eCMD_LAST     /** New command numbers should be added above this */
 } esap_cmd_t;
@@ -432,7 +419,6 @@ enum oper_mode {
     HW_MODE_N_ONLY = 4,
     HW_MODE_A = 5,
     HW_MODE_ANY = 6,
-    HW_MODE_AD = 7,
 
     HW_MODE_UNKNOWN
 };
@@ -543,7 +529,7 @@ typedef struct sap_auto_channel_info {
 
 /** Validate the pairwise encryption */
 #define IS_VALID_PAIRWISE(x) (((!strcmp(x, "TKIP")) || (!strcmp(x, "CCMP")) || \
-                    (!strcmp(x, "TKIP CCMP")) || (!strcmp(x, "CCMP TKIP")) || (!strcmp(x, "GCMP"))) ? TRUE : FALSE)
+                    (!strcmp(x, "TKIP CCMP")) || (!strcmp(x, "CCMP TKIP"))) ? TRUE : FALSE)
 
 /** Validate the WMM status */
 #define IS_VALID_WMM_STATE(x) (((x >= WMM_AUTO_IN_INI) && (x <= WMM_DISABLED_IN_INI)) ? TRUE: FALSE)