Check the length of the buffer before using it calculate
the index of the data in the buffer to prevent index becoming
a negative value.
Change-Id: I3dc440dac2e4a5437e2ff70c39577876a3a97123
CRs-fixed: 2111307
setCmd variable is used to prepare the command with the
arguments received. This can be initialized to the string "str"
to avoid possible uninitialized memory access.
Change-Id: I60cb4de5b01560e4bb079ed92e6c3bde6cfbf9c7
CRs-Fixed: 2098740
1) This commit points the hostapd configuration location
to /data/misc/wifi.
2) Aims to enable configure ctrl_interface via qsap command.
CRs-Fixed: 2091779
Change-Id: I8ebfdd4b5c359659272209ab2e0f7b92793e51c9
This adds new API linux_get_ifhwaddr() which can be used to get
mac address of input interface. IOCTL SIOCGIFHWADDR is used to get
the interface address.
CRs-Fixed: 2080924
Change-Id: I1b825fb2c1f35280d2d57928be4f87d23d78decb
This enhances qsapsetSoftap to take arguments for dual2g and dual5g
configurations while maintaining backward compatibility to set
config file in case of standalone sap.
Additionally enhance 'set' command to configure ssid2 and bridge
parameters which are needed for dual2g/dual5g. Also when setting
ssid2, disable ssid in config files (or vice-versa).
CRs-Fixed: 2080924
Change-Id: I60bf62e6b2ad0cde3ebdfff4814f2ab98aa24b92
This enhances existing 'set' command to allow configuration of dual
SAP. It will create/read/write/update to following configuration files:
CMD: "softap qccmd set channel=6" writes to hostapd.conf
CMD: "softap qccmd set dual2g channel=6" writes to hostapd_dual2g.conf
CMD: "softap qccmd set dual5g channel=6" writes to hostapd_dual5g.conf
Additionally enable LOG_TAG for logging APIs with TAG "QCSDK" and
modify default config file location.
CRs-Fixed: 2080924
Change-Id: I46c59de7fbd2ea273793406f0b82515df94e5c38
This adds APIs to trigger create, delete, interface up and interface
down commands on bridge interface.
It uses following IOCTLs for sending command to linux kernel:
Add bridge iface: SIOCBRADDBR
Remove bridge iface: SIOCBRDELBR
Mark iface up/down: SIOCGIFFLAGS
CRs-Fixed: 2080924
Change-Id: I3d34dc16e9ca82dc4b550cbc83fa4120c80ad54c
wifi_fst.h is no longer part of /hardware/libhardware_legacy/ ,
therefore, compilation of libqsap_sdk would fail. Remove dependencies
for wifi_fst from QSAP.
Additionally, skip calling 'chown' after changing configuration
parameters as QSAP is not changing ownership.
CRs-Fixed: 2069881
Change-Id: Iaadfa182270f22555e486dac24a5acafc247b943
Support for configuring ieee80211h parameter in
hostapd configuration file through soft AP SDK.
Change-Id: I37d8927f2973f90772ab46cc767fdea1ac9cfc6b
CRs-Fixed: 943343
Return value of snprintf can be more than size value when output
is truncated, so copying the '\0' at return value may cause array
index out-of-bound access. And as snprintf function takes care of
terminating the string with '\0', its redundant to copy '\0' at
return value.
CRs-Fixed: 947966
Change-Id: Ic5dab6d9aa57db5000f23c82e2a22924e0154c40
This commit provides read/write access on accept/deny files
to hostapd similar to hostapd.conf.
Change-Id: I1c3cda056a4067d48484cb336e748f04804b68e3
CRs-fixed: 910398
Provision to configure rts_threshold, fragm_threshold and
wmm_enabled in hostapd.conf through NDC commands.
CRs-Fixed: 889979
Change-Id: I94e4486573b562fbe48c641423bf1c1389d0c744
Support for configuring 11ac and ACS channel list parameters in
hostapd configuration file through soft AP SDK.
Change-Id: I45c4f4285357701299c44f31243dea5107b0fabb
CRs-Fixed: 892713
Changes required to support the softap commands
through ndc cli. This new support as part of the
64bit enablement and ndc is used for cli automation
in softap testcases.
Change-Id: I460a3785c3b4a44656281c7243ebdf921fe20f91
CRs-Fixed: 710050
If WIFI_DRIVER_CONF_FILE is not defined fIni is set to null and
hence all the set/get_cfg SAP commands fail. Thus, Invoke
qsap_set_ini_filename explicitly if fINI is NULL.
Change-Id: I9df1f95d7f4b884602cc501fe9e75ff4c26e400c
CRs-Fixed: 865432
This function is for end user to set maximun client
connections number and apply this to hostapd module
Change-Id: I6150b376d22756e8c04ebabe666d81cf3af8fc87
Change location of hostapd accept and deny files
from /data/hostapd to /data/misc/wifi because
SElinux does not allow netd and hostapd to access
/data/hostapd directory.
Change-Id: I61e8521b3a4b6aab759d3b7cbc04acd3da3c8cf3
CRs-Fixed: 756614
Read ieee80211d param from hostapd.conf file instead of reading it
from ini file.
Change-Id: I3773652bc91e2f166111704e70231af6845c5ffc
CRs-Fixed: 727043
Fixes for making SAP SDK 64 bit compliant for QCSAP_IOCTL_ASSOC_STA_MACADDR
ioctl
Change-Id: I161ac3113c01752f627bd876f85342d5a9b20ede
CRs-Fixed: 639046
SoftAP fails to load the default hostapd.conf file
which was left behind as part of failed attempt to
start the softAP. The default hostapd.conf is required
to be copied in case of accidental corruption of
hostapd.conf
Change-Id: I4e6ab7a6bc67fcdcfe225e7e1a811fafe402ebc7
CRs-Fixed: 626022
SAP parameter ignore_broadcast_ssid always set to
"broadcast" due to improper handling of SAP parameters
at SAP SDK.
To mitigate this issue update the ignore_broadcast_ssid
parameter based on the value configured in the framework.
Change-Id: Ia1a35a38464710088921b94269b624d8b1910abc
CRs-Fixed: 588560
When SAP is turned on through GUI, hostapd.conf file
will be overwritten by the framework parameters.Since
in Kit-Kat framework,channel value is hard coded to 6,
same is getting over written whenever we turn on SAP
through GUI, this will cause SAP to come up always on
channel 6.
To mitigate this issue, avoid overwriting the channel
parameter in hostap.conf file by ignoring the channel
parameter from the framework.
Change-Id: I4d87cf70868ad705f63211b2bd10ac2a67646d09
CRs-Fixed: 584112
The sscanf return value is verified whether the three channel
variables, i.e. start channel, end channel and channel band,
are properly updated. If malformed input is given to sscanf, then
these variables may not properly updated. To provide validation
of input, verifying that sscanf returned a correct value of 3.
Change-Id: Ibd185e7a0ffcf5803927990531fc33f0e8977cc9
CRs-fixed: 554349
Before downloading commands to driver through softap SDK we are
checking if SoftAP is enabled are not by running ps in popen.
This sometime throws SIGPIPE error (signal) which is not handled,
due to this we were facing application crash. To fix this we modify
to check the operation mode of the driver through ioctl.
Change-Id: Ia0703ff343d401801655d3b666ade66107a4789e
CRs-Fixed: 535340
Changes to allow setting the configuration item for
AKM suite (wpa_key_mgmt) in hostapd
configuration file. This is needed for PMF
(802.11w) to add SHA256 to the list when
necessary.
Change-Id: Ia6fd4976241fb11525f4be6c11801b9c471d4427
CRs-Fixed: 523705
Changes to allow setting the configuration item for
802.11w (Protected Management Frames) in hostapd
configuration file.
CRs-Fixed: 512764
Change-Id: I4dc7afe8fc56bff79f52eae04a65d573db2746d9
Passing MAC address of STA with which SAP should to
disassociate in data pointer of ioctl was not getting
used by the driver.Current implementation of ioctl in
driver expects address to be present in extra.
Hence changes made in SDK to be compliant with the
expectation of the wireless extensions framework.
CRs-fixed: 455872
Change-Id: I76d23f159afdc8b05c4db1be2d2f2134e14eaed6
1. Fix Compilation error.
3. Changes to make qsap compatible w.r.t android framework.
4. Changes to check if SAP is enabled or not.
Change-Id: I8a21585bc1af92f5fbc885d981227349bb56b0f9
If the hostapd configuration files are not present in /data/misc/wifi,
copy it from the default file location /system/etc/wifi/
while starting softAP.
Change-Id: I3b33a283c2713176666d2a84428645cdb7113684
CRs-fixed: 409888
Fixed the compilation errors and also changed wifi_qsap_load_driver to load
cfg80211.ko while loading softap for prima.
Change-Id: Ifb258623c2f53438aacc62c4f6fc7e6f34974eb2
If the operating mode is NOT 'B' and the
channel to be set is 14 then change the
operating mode to 'B'
CRs-Fixed: 365096
Change-Id: Id21321edb303381b22dda6599454aa2cfd299dba
Turn off and restart sap with safe channel list received from android
telephony layer, whenever sap is operating on an channel interfering with
LTE.
Change-Id: Iefec6024a63c820e09b837b7daa7ba5a486ac1d2
After factory reset we create hostapd directory with permission 770
and owner as root which is causing issues.so change the permission
of /data/hostapd from 770 to 771.
Change-Id: I1863c4055870c9556b3ba9bf9380cdaca4a3fdb5
CRs-fixed: 337227
- Add SoftAP API to send initAP cmd to Driver
- Add SoftAP API to send exitAP cmd to Driver
- Add SoftAP API to update macaddr_acl value
CRs-fixed: 331343, 333643
Change-Id: I662b819a4055a652649748461e58b1ab50e0b01e
Acked-by: Ramasundar Kara Venkata <nkaraven@qca.qualcomm.com>
